Do you have a link for the 1.2ohm coils?
Yep...they're on Element vape, too, for $11.95/4 coils. But, I could likely find them for less than that.
You are being redirected...
Do you have a link for the 1.2ohm coils?
I thought all the KFLs were gone (because of people like me stocking up).
But...for those of us who are energy conservationists (ie. lazy)...there's something to be said for going to Vapecrawler =>
I love Kayfuns and have a lot of EHpro clones, I don't think I have any originals. How are the Kayfun 2019 clones? May get some![]()
No, all mine are EhPro. Wish I could have got some authentic but out of my price range. The EhPro ones are good so I always wondered if the real thing was even better.
Well,dang.I had O interest in another tank til you posted the mini Crown.I have an original but I find myself liking smaller tanksThe Aspire Triton Mini I got takes drop-in coils. These other tanks also come in Rose Gold and take drop-ins: Uwell Crown, Uwell Crown Mini, Horizon Tech Falcon, and Aspire Cleito.
Element Vape even has the Uwell Crown Mini in Rose Gold only, on sale for $14.95. It takes the dual sub-ohm coils described, but also the 1.2ohm single coils.
You are being redirected...
I have 2 originals 22mm versions (and 1 24 mm on the way) and and 1 SXK 22mm clone from FT. I got the clone to 'test drive' before springing for the originals.
The SXK clone is dang near as good as the real deal. Very hard to tell them apart. The main difference is the clone comes with a SS air adjustment screw and the Svoe's come with the new longer (6mm) nylon screw. Supposedly the longer screw stops some minor juice weeping some users have complained about. I get a minuscule amount of juice seepage from the clone. It can buy a package of 3 6mm nylon screws from Svoe vendors for $2-$3 dollars if so desired/needed.
It's only a 2ml tank capacity so I run all mine with the 'Long Mode' kit for 3 ml of capacity. The other thing is they (Svoe's and clones( come with the PEI yellow tank section. I dislike that color for my tanks so I get the optional clear tank section.
Oh and the drip tip is very short with a narrow diameter. Tough to put it in your mouth w/o your lips resting on the top of the atty. I switch it out and use a KFL V5 drip tip.
One, last thing ... it vapes mildly warmer than any of my other Kayfuns (the original Lites, V4, V5, V3 mini - I like Kayfuns too). I only vape at 8-10 watts. Many folks who vapor with more power and/or use TC don't 'say' it vapes a bit warmer. But I've heard other also say it's a warm vape. It's a tiny atty so the vape doesn't cool hardly at all by the time it reaches your mouth.
Mike, did you try any of the clone Long Mode tank extensions on your authentic KFL19? I am curious about that considering the difference in price. I have a couple of Svoe's Long Mode kits but I would like backups. I did order an SXK 2ml window section from FT to try on one of my KFL19's. If that works I'll get one of their Long Mode kits to try unless you know already.
Also thanks for the tip in the 9 month thread on the Zenith D22's. The D22's are right up my alley. I scooped up some of those and replacement coils over the weekend. Until I saw your posts, MikeAdore's and Fran's I didn't even think about "what if I can't build for a period of time".
I have a couple authentic KFL's and also the Russian 91% clones and I can't tell the difference at all so I don't think you are missing anything either. I never tried the EHPro's. When those 91%'s went on sale a few years back I grabbed 8. Evcig's still has them in stock for $35 now. IMO it's just as good as the authentic. The Russian 91% v2 RBA by KeboNo, all mine are EhPro. Wish I could have got some authentic but out of my price range. The EhPro ones are good so I always wondered if the real thing was even better.
Good to know. Thank you. Next FT order I'll grab one or two.Shoot ... I just filled up all my atty's so I don't want to dump out the juice to mix and match the long mode kit from clone to original. But, it's encouraging. The following clone accessories fit just fine on an original nKFL/KFL19 whatever it's called.
So I'd assume the long mode would fit OK too. None of those accessories 'rang my chimes', so they're just in the spares pile.
- Bell Cap
- Dome Kit/Cap with chimney extension
- Top Fill Kit/Cap
- Replacement 2ml Window section
I have a couple authentic KFL's and also the Russian 91% clones and I can't tell the difference at all so I don't think you are missing anything either. I never tried the EHPro's. When those 91%'s went on sale a few years back I grabbed 8. Evcig's still has them in stock for $35 now. IMO it's just as good as the authentic. The Russian 91% v2 RBA by Kebo
That has interesting ramifications. BT could afford to wait out a dry spell but none of their competitors could. It would mean the death of every B&M store. An interesting way to sweep away all competition.We don't know how extreme Deeming will be BUT the whole no sales of anything not PTMA approved could halt everything vape related in May because nothing is approved that I have heard. So I am planning for worst case senerio
Thanks, JC.
I should buy in celebration of my county expected to have minimal impact from Dorian. What a relief.
Heh. There are repetitive town names all over the world. One of the more famous is Paris, Texas. The rule used to be wherever there was a post office there was a town by definition. Also the standard distance between train stops was seven miles. These two together put large numbers of itsy bitsy towns with one or two digit populations all over the USA.I ordered a couple of rose gold KFL's just a couple of hours ago. Just received a PDF of the packing slip which is something I never got before. I panicked for a moment, the address was in Ontario, CA. I knew Ontario was a province in Canada but I didn't know it was a town in California. That's a pretty fast response time, 2 hours and they have already been picked and packed.
Good to know. Thank you. Next FT order I'll grab one or two.
Anything on the market after 8-8-16 has to be PMTA submitted and approved or it is illegal. The original Deeming had another date, that everything has to be approved, that includes all juices too. Sooooo no one knows what will happen. My attitude is trust no one LOL! Take care of your needs while you can because it could be the end of online sales too.That has interesting ramifications. BT could afford to wait out a dry spell but none of their competitors could. It would mean the death of every B&M store. An interesting way to sweep away all competition.
Things don't have to be approved as of May in order to remain on the market, the just have to have an application filed. Of course that application has to be of sufficient quality that the FDA won't reject it out-of-hand, because as soon as the FDA rejects an application, the item in question must be removed from the market.We don't know how extreme Deeming will be BUT the whole no sales of anything not PTMA approved could halt everything vape related in May because nothing is approved that I have heard. So I am planning for worst case senerio
Heh. There are repetitive town names all over the world. One of the more famous is Paris, Texas. The rule used to be wherever there was a post office there was a town by definition. Also the standard distance between train stops was seven miles. These two together put large numbers of itsy bitsy towns with one or two digit populations all over the USA.
We really have no idea who has submitted, juice makers? Probably BT vape products have been submitted, but anyone else? Mods, tanks??Things don't have to be approved as of May in order to remain on the market, the just have to have an application filed. Of course that application has to be of sufficient quality that the FDA won't reject it out-of-hand, because as soon as the FDA rejects an application, the item in question must be removed from the market.
The Deeming explicitly grants an additional year on the market while the FDA reviews the application. I've never really understood that because the Tobacco Control Act, which gives the FDA the authority to do any of this, explicitly states that the FDA should complete these reviews within six months.
Anyway, I think the way this will shake out is that anything that gets a PMTA filed for will be allowed to remain on the market until the FDA either approves or rejects the application. It may take them several years to approve anything at all. I believe they've only ever approved two PMTAs, one for Swedish snus and the other for IQOS, and both of those took considerably longer than one year.
So the question really is: Who will actually file PMTAs that don't quickly get rejected?