Are you done stocking up?

[JustWondering1]

This is a great deal if the wattage is right for you. Big Bog gave this kit a good review and this deal tempts me, but the wattage is much higher than my 12 - 14 ish range. It's only $2.99 for the kit and it comes with two disposable tanks. And it's a great looking kit!

Exclusive! Freemax GEMM 80W/2900mAh Kit with Two Disposable Mesh Tanks $2.99 (USA) - Cheap Vaping Deals

 

[UncLeJunkLe]

EDIT: Never mind, wrong SKU

 

[bnrkwest]

8vape still has the uwell RBA's for free and Kangerwholesale has the uwell mini for $12 plus VD20 code for 20% off. Great price for a rebuildable for your stash
Uwell Crown Mini

 

[*RJ*]

Oops! Yes you would be correct. Of course all of this is based on the assumption that the 3.5 mm listed is the outside dimension of the coil and not the inner dimension.

It would make more sense to me that it would be inner diameter just for the fact they probably had a known size rod/etc for winding. Someone should ask ft. I’m curious now.

 

[*RJ*]

8vape still has the Uwell RBA's for free and Kangerwholesale has the Uwell mini for $6 plus VD20 code for 20% off. Great price for a rebuildable for your stash
Uwell Crown Mini

Only 2 ml capacity. I would spend all day filling up cause I vape so much. But that is a really good price.

 

[NolaMel]

It would make more sense to me that it would be inner diameter just for the fact they probably had a known size rod/etc for winding. Someone should ask ft. I’m curious now.

I’m confused . I did order some coils, and ran the #s through the coil building app to try and figure out diameter. Width came closer to the listed ohms than depth. I figured I could measure one when they came and crack their secret code!

 

[markfm]

8vape still has the Uwell RBA's for free and Kangerwholesale has the Uwell mini for $6 plus VD20 code for 20% off. Great price for a rebuildable for your stash
Uwell Crown Mini

They come up as $12 for the mini when I look.

It's probably use my own wire with the rba, not sure I would want to try "SUS316 foo-grade heating wire" [emoji16]

 

[fiddleshe]

I left myself wide open for that one, didn't I? lmao

I dont judge you for it.

 

[bnrkwest]

They come up as $12 for the mini when I look.

It's probably use my own wire with the rba, not sure I would want to try "SUS316 foo-grade heating wire" [emoji16]

You're right $12, I was looking at something else for $6 when I was typing

 

[UncLeJunkLe]

Only 2 ml capacity. I would spend all day filling up cause I vape so much. But that is a really good price.

Confused. Aren't you one of the pod users on this thread? Do pods have capacities significantly over 2ml?

If your not one of the pod users here, disregard.

 

[*RJ*]

Confused. Aren't you one of the pod users on this thread? Do pods have capacities significantly over 2ml?

If your not one of the pod users here, disregard.

I have a minifit but that’s not my all day every day vape. I vape about 20 ml per day and it seems I’m constantly filling up my 5 ml tank. At this point I am all stocked up and can afford to be nit picky and 2 ml just isn’t worth it for me.

 

[UncLeJunkLe]

I’m confused . I did order some coils, and ran the #s through the coil building app to try and figure out diameter. Width came closer to the listed ohms than depth. I figured I could measure one when they came and crack their secret code!

316SS
0.32mm = 28AWG.
Picture looks like around 12-13 wraps
1.3 ohms.

That calculates to around 2.5mm ID on the coil.

The last post on this thread claims 2.5 ID is what they are, too.

 

[NolaMel]

316SS
0.32mm = 28AWG.
Picture looks like around 12-13 wraps
1.3 ohms.

That calculates to around 2.5mm ID on the coil.

The last post on this thread claims 2.5 ID is what they are, too.

That would be great to know if I ordered that coil.... but I didn’t . I was talking in general about their listings. I always wrap my own, thought it would be nice to have some done for me. The descriptions are, well, less than descriptive.

 

[Sugar_and_Spice]

For those of us using the SKRR-S tank(eightvape) and want to use the Smoke TFV8 baby rba......the glass is just about 1- 1.5mm too short. So after about an hour at looking for glass that might fit, I decided to try the bubble glass from The Hellbeast Rebirth to see if it would fit. It does. So now I am vaping some Strawberry Biscuit(recipe by @FranC ). So far go good.. AT first I was not sure if the tank along the base would be a tad too big but after filling the tank and keeping an eye on it for the last hour or so, no leaking so far.

Of course, I think it was already established( by @bnrkwest) that for those who have the rba for the Hellbeast(marvec) those fit with the tank that come with the SKRR after putting the smallest 0-ring on it so it can properly make contact with the base pin.

ps. the glass that comes with the smoke baby rba is not wide enough for the skrr tank.

 

[mmsjs5]

Got my (2) Advken Dominators in today, kind of a surprise as 17 track still says "in transit."

When did you order yours? I have 4 on the way, ordered the 3rd, and 17track is stuck on the same thing since the 13th.

 

[dedi]

@rosesense deepest sympathy to you.

 

[bnrkwest]

When did you order yours? I have 4 on the way, ordered the 3rd, and 17track is stuck on the same thing since the 13th.

Mine showed up today, I forget when I ordered them tho.

 

[Slots]

@rosesense, so sorry.
Hubby has lost two of his kids, and my heart go's out to you . I know how hard it can be.

 

[Slots]

Washington state ... make sure you have your nicotine stored.
Gov. Inslee introduces host of new restrictions on vaping products

 

[Haktuspit]

When did you order yours? I have 4 on the way, ordered the 3rd, and 17track is stuck on the same thing since the 13th.

Ordered the third as well. 17 track showed as still in transit then boom I had them. It did update to say delivered at some point between then and now.