Are you done stocking up?

[Myrany]

I dont remember what thread it was but someone was looking for a rebuilding guide. I stumbled on this one today and it is not terrible Beginner's Guide to DIY Rebuildables

 

[zoiDman]

I got what's below recently and installed a couple of them. All are 3mm inside diameter so far which is nice and the resistance on the container seems to be correct. One of my atomizers needs longer legs than most current designs but there is enough. I still make coils but for a few cents each these are nice to have.

• 
  
  Authentic MKWS 316 Stainless Steel Pre-Coiled Wires for rba Atomizers (50-Pack)
  316 SS, 28 AWG, 50-Pack, 0.6ohm / SKU: 4035000
  QTY 1 › Reorder
• 
  
  Authentic MKWS 316 Stainless Steel Pre-Coiled Wires for RBA Atomizers (50-Pack)
  316 SS, 26 AWG, 50-Pack, 0.32ohm / SKU: 4035001
  QTY 1 › Reorder
• 
  
• 
  
  BTMD 316L Stainless Steel Pre-coiled Wire
  316L SS, 30 AWG, 100pcs / SKU: 9685745
  QTY Cancelled › Reorder
• 
  
  E-XY 316L Stainless Steel Pre-coiled Coil (100-Pack)
  316L SS, 30 AWG, 100-Pack / SKU: 8941500
  QTY 1 › Reorder
• 
  
  E-XY 316L Stainless Steel Pre-coiled Coil (100-Pack)
  316L SS, 28 AWG, 100-Pack / SKU: 8941502
  QTY 1 › Reorder
• 
  
  E-XY 316L Stainless Steel Pre-coiled Coil (100-Pack)
  316L SS, 26 AWG, 100-Pack / SKU: 8941501
  QTY 1 › Reorder

I have Hundreds and Hundreds of those MKWS SS Coils. They're my Daily Drivers.

 

[DaveP]

They really are great single 18650 mods.

View attachment 870731

Funny. I read the name straight on and it read ZYOZZ with some dashes in between. When I tilted my head to the left it turned into INNOKIN.

 

[PasoFino]

They really are great single 18650 mods.

View attachment 870731

Is that whole black part the button? How do you like it? Seems like it might be too easy to accidentally fire?

 

[hittman]

They really are great single 18650 mods.

View attachment 870731

The hardest part is deciding what color to get.

 

[PasoFino]

I dont remember what thread it was but someone was looking for a rebuilding guide. I stumbled on this one today and it is not terrible Beginner's Guide to DIY Rebuildables

That may have been me. Thank you! Just started DIY juice and now looking to start on coils too.

 

[PasoFino]

So I tried ordering from ejuice steaks but everything was out of stock. They have only refunded part of my money so far even tho everything shows refunded. Hopefully it will catch up and I’ll get a full refund but I’m bummed. They were some great prices and I was so excited!

 

[SKYYcamel]

Bought a couple of Taifun GT’s clones from Vaporider (buy one get one free) for $9.99 plus shipping. Worth a shot at that price.

 

[Myrany]

So I tried ordering from ejuice steaks but everything was out of stock. They have only refunded part of my money so far even tho everything shows refunded. Hopefully it will catch up and I’ll get a full refund but I’m bummed. They were some great prices and I was so excited!

They refunded part of my order today as well. Fortunately not the part I really needed...at least not yet. I have not had a problem with them. If they say they refunded it does get refunded. Maybe not instantly but it does get done.

 

[UncLeJunkLe]

ejuice steaks

 

[DaveP]

I just bought the Bronze Innokin Kroma-R from MadVapes. After listening to the comments it became the newest addition to my FDA survival stash.

The downer is that my 10% off coupon didn't get added. My fault, but still a bummer. Maybe I'll get a full price model that lasts longer.

 

[DaveP]

Adding some external battery mods would be a good idea. You can always (hopefully) get more batteries when they age out. Nothing wrong with isticks (except when the battery dies, they’re done). I still have two by my bedside I use every night when I’m reading.
I resisted building for a long long time, only to discover it’s way way easier than I expected. Apparently you can teach an old dog new tricks lol! I started out with the Innokin ares. Not the most flavorful tank, but it was really easy to learn on, and came with everything I needed to start. Whatever you pick, watching how to videos online can be really helpful. And, there’s plenty of help to be found here.

I have a couple of internal battery mods that get used here and there. My Pico 40W still has great battery life after about 4 or 5 years. It's not an every day all day mod, but I keep an atty on it that's filled with an alternate juice for a change of pace here and there. I've been vaping it all morning and the battery display is still near the top.

 

[UncLeJunkLe]

Pico 40W

I didn't know there was a Pico 40W. I also thought all the Picos were 18650 and 21700 mods.

 

[Uncle]

The hardest part is deciding what color to get.

Sure was, really "Like" mine ("Black") . . . Hopefully - Might get another one (without-a-doubt the "Bronze" & maybe even a "Steel") if and when the price comes down . . . Just Sayin' . . .


.

 

[PasoFino]

So I tried ordering from ejuice steaks but everything was out of stock. They have only refunded part of my money so far even tho everything shows refunded. Hopefully it will catch up and I’ll get a full refund but I’m bummed. They were some great prices and I was so excited!

Ejuice deals. Darn autocorrect

 

[Myrany]

I have Hundreds and Hundreds of those MKWS SS Coils. They're my Daily Drivers.

I do too. For years every fasttech order had a few packs of prewound coils tossed in. They are cheap and very handy to use. With my arthritis I have days I can install a prewound coil but winding one myself is not in the cards. These work beautifully

 

[Fidola13]

I got what's below recently and installed a couple of them. All are 3mm inside diameter so far which is nice and the resistance on the container seems to be correct. One of my atomizers needs longer legs than most current designs but there is enough. I still make coils but for a few cents each these are nice to have.

• 
  
  Authentic MKWS 316 Stainless Steel Pre-Coiled Wires for RBA Atomizers (50-Pack)
  316 SS, 28 AWG, 50-Pack, 0.6ohm / SKU: 4035000
  QTY 1 › Reorder
• 
  
  Authentic MKWS 316 Stainless Steel Pre-Coiled Wires for RBA Atomizers (50-Pack)
  316 SS, 26 AWG, 50-Pack, 0.32ohm / SKU: 4035001
  QTY 1 › Reorder
• 
  
• 
  
  BTMD 316L Stainless Steel Pre-coiled Wire
  316L SS, 30 AWG, 100pcs / SKU: 9685745
  QTY Cancelled › Reorder
• 
  
  E-XY 316L Stainless Steel Pre-coiled Coil (100-Pack)
  316L SS, 30 AWG, 100-Pack / SKU: 8941500
  QTY 1 › Reorder
• 
  
  E-XY 316L Stainless Steel Pre-coiled Coil (100-Pack)
  316L SS, 28 AWG, 100-Pack / SKU: 8941502
  QTY 1 › Reorder
• 
  
  E-XY 316L Stainless Steel Pre-coiled Coil (100-Pack)
  316L SS, 26 AWG, 100-Pack / SKU: 8941501
  QTY 1 › Reorder

That’s a great selection of pre made coils. I was trying to use some premade coils but most of them didn’t have the ohms on the container. The ones that did were off by a lot. I got frustrated so I just ended up making my own. I know exactly what ohms I want so it was easier to make them.

Most of the coils I make are 3mm id but it’ll vary depending on the size of the build deck. For smaller decks I’ll use 2.5 and for larger decks I’ll use 3.5mm sometimes even 4mm.

I like to vape from .3 ohms to .6 ohms again depending on the atty I’m using. With dual coil attys I’ll go to .25 ohms to .3 ohms.

You’ll find that making your own is actually fun but I’ve turned my vaping into a hobby including DIY juice when I’m able to mix.

Some people just don’t have the time or don’t want to be bothered. It’s all good as long as we’re not smoking cigarettes-yuck!!

 

[fiddleshe]

Ejuice deals. Darn autocorrect

I actually was thinking of the culinary uses of nic base earlier today. Maybe it would add an extra kick to boring old dishes. So yeah I like ejuice steaks better.

 

[Zutankhamun]

I'm happy with the KF 2019, so much that I bought 3 more after trying it. You will need to buy the top fill kit for it and use the 4ml tank section that comes with it. It's a better flavor and vapor producer than the Kayfun Lite V2, IMO.

brilliant, thank you. 1st (followed by last) purchase in a while I think. Better than v2?!!
Not sure I’ll bother with the top fill.
I had this discussion the other day. You kids and your top fill exclusives are beyond me


Ps. Does it ‘whistle’ to an annoying level?

 

[Bigbob2322]

Is that whole black part the button? How do you like it? Seems like it might be too easy to accidentally fire?

No the other side is the firebar and only fires from half way and up, bottom won't fire the mod. I really like the mod.