Are you done stocking up?

NCC

Vaping Master
ECF Veteran
Verified Member
Jan 14, 2010
3,847
6,865
Fla Panhandle, USA
I just remembered why I didn't get more Dinner Lady Blackberry Crumble, it really gunks up my coils! LOL I need to dilute this stuff, although love the flavor!
My favorite commercial mix was a simple one, Vapor Bomb's Coffee with Cream & Sweetener. And, that's why I stopped buying it way back when. Well, that and the 50¢ per ml was a bit much too.
 

UncLeJunkLe

ECF Guru
ECF Veteran
Verified Member
Nov 29, 2010
10,626
2
28,689
¯\_(ツ)_/¯
My favorite commercial mix was a simple one, Vapor Bomb's Coffee with Cream & Sweetener. And, that's why I stopped buying it way back when. Well, that and the 50¢ per ml was a bit much too.

That's exactly why I stopped vaping coffee, too. 2 days max on a subtank coil. :nah:
 

BillW50

Vaping Master
ECF Veteran
Verified Member
Nov 23, 2014
3,429
34,444
US
That's exactly why I stopped vaping coffee, too. 2 days max on a subtank coil. :nah:

I almost vape nothing but coffee flavors and there are good ones and bad ones for gunking coils. The majority of coffee juices isn't very good if you ask me. But Yeti Vape's Haze Cap has been my ADV for 5 years now. Which I can usually get over 100ml through an Atlantis coil with it. But sadly Yeti Vape stopped shipping to US customers a couple of months ago.

LNW sells a their cappuccino flavoring which is also pretty good and coil friendly. Sadly you need like 15% flavoring for your DIY since the flavoring is on the weak side.
 

Butch

Vaping Master
ECF Veteran
Verified Member
Nov 20, 2011
7,243
31,637
433 miles north. of the Alamo
I almost vape nothing but coffee flavors and there are good ones and bad ones for gunking coils. The majority of coffee juices isn't very good if you ask me. But Yeti Vape's Haze Cap has been my ADV for 5 years now. Which I can usually get over 100ml through an Atlantis coil with it. But sadly Yeti Vape stopped shipping to US customers a couple of months ago.

LNW sells a their cappuccino flavoring which is also pretty good and coil friendly. Sadly you need like 15% flavoring for your DIY since the flavoring is on the weak side.

I use Isreal Coffee from yaliq, I have 2,000 mls of juice and 24 oz of flavoring. There are others I use but that is the main one.
 

bnrkwest

ECF Guru
ECF Veteran
Verified Member
Sep 6, 2011
10,873
36,891
Somewhere out there
IMG_1185.JPG
Anyone else paranoid that they don’t have enough of certain items? I know I’m good on nic, rdas, and rtas. I have three dna 250c devices and two Yihi. I also have a couple Asmodus mods and a couple squonkers and a couple mechs. I’m worried all my regulated devices will fail and I’ll be stuck with mechs which sucks. I’m a regulated guy.
Did you buy vape safe's and stop short inserts? Evolv Kick? I bought quite a few in 2016 and 2019 incase I need to use a mech. This Nemesis clone has one on the top, makes it regulated.
 
Last edited:

englishmick

Vaping Master
ECF Veteran
Verified Member
Sep 25, 2014
6,591
35,829
Naptown, Indiana
Regulated mods really haven't been around that long. New ones were coming out all the time so most of us likely stopped using our older mods. I had three reg mods die on me, all Sigeleis. That's 3 fails in 6 years.

Guess we don't know yet how long the more recent mods will last. Maybe Solos will still be running 20 years down the road. Maybe they last longer if you use them at low power.

It's amazing that they last as well as they do. Running batteries sometimes close to their limits in a situation they weren't designed for, in a little box full of electronics with buttons and switches constantly exposed to liquids and getting overheated and dropped and so forth.
 

Myrany

Vaping Master
ECF Veteran
Verified Member
Apr 14, 2013
8,477
44,353
Louisiana
Regulated mods really haven't been around that long. New ones were coming out all the time so most of us likely stopped using our older mods. I had three reg mods die on me, all Sigeleis. That's 3 fails in 6 years.

Guess we don't know yet how long the more recent mods will last. Maybe Solos will still be running 20 years down the road. Maybe they last longer if you use them at low power.

It's amazing that they last as well as they do. Running batteries sometimes close to their limits in a situation they weren't designed for, in a little box full of electronics with buttons and switches constantly exposed to liquids and getting overheated and dropped and so forth.
And that is why I have my mechs for ultimate backup and know how to use them safely. :)
 

englishmick

Vaping Master
ECF Veteran
Verified Member
Sep 25, 2014
6,591
35,829
Naptown, Indiana
And that is why I have my mechs for ultimate backup and know how to use them safely. :)

Yeah. I always keep one Silver Bullet running so my mech skills don't get rusty. I read here once that someone kept 2 tanks for each mech. One was set up for higher voltage with new batteries. They run down quickly from 4.2 to around 3.8, then the other tank goes on. That sounded like a good idea and I've been thinking of trying it. The middle part of the range is where most of the vaping time comes from but a tank set up for that can be a little hot at 4.2.
 

UncLeJunkLe

ECF Guru
ECF Veteran
Verified Member
Nov 29, 2010
10,626
2
28,689
¯\_(ツ)_/¯
Yeah. I always keep one Silver Bullet running so my mech skills don't get rusty. I read here once that someone kept 2 tanks for each mech. One was set up for higher voltage with new batteries. They run down quickly from 4.2 to around 3.8, then the other tank goes on. That sounded like a good idea and I've been thinking of trying it. The middle part of the range is where most of the vaping time comes from but a tank set up for that can be a little hot at 4.2.

I suppose you could also just charge to 3.8v. This might be a pain to have to do for most chargers that most vapers probably have, but more expensive chargers can be programmed to stop charging at whatever you set the cut-off to.
 

Myrany

Vaping Master
ECF Veteran
Verified Member
Apr 14, 2013
8,477
44,353
Louisiana
Yeah. I always keep one Silver Bullet running so my mech skills don't get rusty. I read here once that someone kept 2 tanks for each mech. One was set up for higher voltage with new batteries. They run down quickly from 4.2 to around 3.8, then the other tank goes on. That sounded like a good idea and I've been thinking of trying it. The middle part of the range is where most of the vaping time comes from but a tank set up for that can be a little hot at 4.2.
In my REOs I run a .7 ohm kanthal single contact coil build. It is a tad hot at 4.2 but that goes down to tolerable in 10-15 puffs for me. My problem is quitting before I drain the battery too much so I have developed the habit of just changing the battery when I fill the bottle and it seems to keep me from doing that. Yes I am changing the battery a little early but I can live with that. I just don't notice the dropoff until it is far too low. Never have. Then again I am usually vaping away and working on something else at the same time so not really paying attention.
 

rosesense

15years and counting
Supporting Member
ECF Veteran
Verified Member
Contest Winner!
  • Jan 1, 2010
    17,697
    52,270
    TN
    Here are the ones I also bought, DOVPO Safe Link, looks like they have some. If you are worried about mech's get one or two :) I have these plus kicks and stop shorts because I am not a mech user

    Safe Link Mechanical Mod Safety Device
    I have a couple but not sure where they are available anymore. Not from your link, due to PACT.
     

    UncLeJunkLe

    ECF Guru
    ECF Veteran
    Verified Member
    Nov 29, 2010
    10,626
    2
    28,689
    ¯\_(ツ)_/¯
    I'm logged in, but am redirected to the Kindle eBook store for a title, "Fifty Shades of Silver Hair and Socks".


    Did you log in using Amazon or Google or Facebook or whatever credentials? That could be the problem.
    I created an account directly and it works fine. I placed and order with them last week before March 27. Just checked and was able to add to cart and get to checkout. $14.95 shipping.
     

    Users who are viewing this thread