Are you done stocking up?

[Semiretired]

I prefer smaller tanks. I like to vape through a tank and then change flavors - if I was vaping a larger tank then I would be stuck on one flavor to long...

 

[oplholik]

I've been using a JOYETECH EGO ONE V2 TANK on my Provari mini for a few days now and really like it. Coils sold desperately. I bought the CLR(rebuildable) heads for it. I also have the Mega 4ml coming.
Joyetech eGo ONE V2 Tank

 

[DingerCPA]

@ScandaLeX, I'm right here with you....



My largest one-day haul, and this doesn't include the order that shipped to my house instead of my office. Five total pkgs today!!!!

I prefer smaller tanks. I like to vape through a tank and then change flavors - if I was vaping a larger tank then I would be stuck on one flavor to long...

I'm with you. I have Flavor ADD and can't be tied to more than a few ml at a time

 

[mattiem]

@Fozzy71 - No, they are not rebuildable, but the 2mL capacity isn't bad! And...to refil them, all you have to do is unscrew the bottom of it and fill it. It's easy-peasy to do. Coil are also available in 1.5, 1.8, and 2.1ohms (Desert Vapes has them for $6.00/box of 5). Use "1storder10" for 10% off, if you're a new customer.

The 16D have been for 2 years, and still are, my favorite tanks, and I use them daily! I get a very decent vape from them, and I smoked 1 - 1 1/2 packs of smokes for 42 years! Satisfies me - no problem! I've loaded up on more of them in several colors, as well as a....load of coils for them.

Added: I've loaded up on more not because they break easily, but because I don't want to be without them in years to come. I'm still using the original 4 (in various colors) that I started using 2 years ago! I've dropped them on concrete, have stepped on them in the grass, have dropped them while mowing my pastures, they've fallen off the counter onto the kitchen tile floor...NOT a single one has even a crack in it yet, let alone totally broken!

Your 16D's sound a lot like my favorite topper (SMOKTech ARO ll ego bottom coil). It is a little work horse for me. It takes pro-tank coils so is also easy for me to rebuild the coils. I have been using them for at least 2 years and have only tossed one so far. I think it must have had a hairline crack hidden somewhere but if so I couldn't find it. I started leaking so I finally tossed it. I counted them up a while back and I have 35 of them right now. I don't think I will ever run out because they just keep on keeping on

 

[DingerCPA]

Your 16D's sound a lot like my favorite topper (SMOKTech ARO ll ego bottom coil). It is a little work horse for me. It takes pro-tank coils so is also easy for me to rebuild the coils. I have been using them for at least 2 years and have only tossed one so far. I think it must have had a hairline crack hidden somewhere but if so I couldn't find it. I started leaking so I finally tossed it. I counted them up a while back and I have 35 of them right now. I don't think I will ever run out because they just keep on keeping on

I had a Smok ARO (can't remember if it was the II or not) I couldn't get PT heads to fit because the flange at the bottom of the coil was too wide. I could get Smok coils to fit in my PT2s.

Sadly, I've made them all go away (and now kinda wish I wouldn't have) Although, they were very "heavy" for me, and made whatever mod I was running them on somewhat imbalanced (but hey, that's kinda like me, so.....)

 

[JCinFLA]

I counted them up a while back and I have 35 of them right now. I don't think I will ever run out because they just keep on keeping on

Yep, those sound like my 16D! I also have a stash, but I don't think it's as many as 35, probably closer to 2 dozen. Got most of them when I found a bunch on clearance for $1.99 each, instead of the regular $3.50-$5.99 price most places wanted for them.

 

[mattiem]

I had a Smok ARO (can't remember if it was the II or not) I couldn't get PT heads to fit because the flange at the bottom of the coil was too wide. I could get Smok coils to fit in my PT2s.

Sadly, I've made them all go away (and now kinda wish I wouldn't have) Although, they were very "heavy" for me, and made whatever mod I was running them on somewhat imbalanced (but hey, that's kinda like me, so.....)

I am thinking what you had are not what I have. Since these are plastic they are very light weight. I don't vape any tank cracker juices so the plastic isn't a problem for me. I love the fact that they come in so many pretty colors. I am able to color code my various flavors.

 

[herb]

About to order 4 oz Boston round storage bottles for nic but there seems to be some that are coated on inside & some not . I know this has been talked about but i searched & can't find the info .

Any experience with correct ones to get, thanks folks.

 

[mattiem]

About to order 4 oz Boston round storage bottles for nic but there seems to be some that are coated on inside & some not . I know this has been talked about but i searched & can't find the info .

Any experience with correct ones to get, thanks folks.

That is a new one for me. I would think you would want the un-coated ones though.

 

[DingerCPA]

I am thinking what you had are not what I have. Since these are plastic they are very light weight. I don't vape any tank cracker juices so the plastic isn't a problem for me. I love the fact that they come in so many pretty colors. I am able to color code my various flavors.

Yes - mine were glass tanks..... I'm guessing that's why they were so much heavier (and yes, I loved the colors!)

 

[Tommy-Chi]

I just had some orders from FastTech ship out to me.
I pulled the trigger on a Vamo v5, 2- 75w Picos and a waterproof Invader mod.

Those are mods i would have never bought, I'm a pretty frugal guy. I still have my SVD, VTR in my weekly rotation.
I vape at 24mg 2.1 ohms -15watts.

My stash-

1 Itaste VTR
1 Itaste SVD
2 Sigelei 100w box mods (One Black, One Silver)
1 70w Kbox
1 40w Kbox
1 M22 pro mod
1 Itaste MVP Pro 3.0
1 Kayfun clone
2 misc RDA stainless tanks
3 New iclear 30s tanks in boxes
3 used iclear 30s tanks in rotation
5 plastic tank replacements for iclear30s
20 boxes of 5 each (100) iclear30s coils

En Route from FastTech-

1 Waterproof Invader Mini (To vape by the pool)
1 All Black 75w Pico
1 Silver 75w Pico
1 Gun Metal Vamo v5

Juice/Nic -
5 236ml bottles of Menthol from MBV - all day vape in 80pg/20vg 24mg
5 236ml Bottles of Freckled Lemonade from MBV - all day vape #2 in 80pg/20vg 24mg
5 Misc 30ml 100%vg in assorted flavors (for big clouds) in 3mg
2 Liters of 100mg Nic Juice

By my calculations this much juice should last me and my brother about 7-8 years.
The MBV juice is just to help us ease into diy.
I hope I have enough iclear atomizers to last - 10 atomizers should last us a year, i change mine every 2 months and he uses like 3 in a year.

Do you think I prepped enough?
Also, what are the odds of the FastTech stuff not making it to Texas, I've never had issues before.
Thank you everyone for all the info and suggestions. Especially the 20% off coupon for the 100mg Nic.

You can always take a look at the document in my ECF signature to see what I have done. It's just below. If you have comments please feel free to leave them on the document. Thanks!

 

[Tommy-Chi]

Agree with you,, I personally dont believe in credit cards,, I couldn't imagine shopping for my vape supplies with a deeming lurking via credit card. that would be too much stress. i am debt free, own my cars and home. i am one of the 'lucky ones',, but that's what i worked for..... freedom from debt. not bashing or judging anyone,, and i hope all are able to quickly pay off their credit cards.

I did not posses credit cards or a line of credit from PayPal until Deeming hit. Everything should be paid off in 45 days. I think I'm OK so far.

 

[JCinFLA]

@herb - I ordered all mine from GBO, and they have no coating anywhere. I didn't even know there were any that are coated inside.

 

[Vandal]

I have part 2 of an order from Fasttech still somewhere in the system. It shipped July 28th and so far has shown to be going round and round between "Processed Through Facility" and "Origin Post is Preparing Shipment". It is still in Beijing, China. I think it will not beat 8/8, so, we shall see. Luckily it's only 2 drip tips as the other items became discontinued after my order was placed.

I have a another FT cart I've added a few things to, but I am waiting until the dust, if there is any, has settled. The only issue I foresee with the FDA is that perhaps they might want to inspect for new items (released after 8/8), but I can't think they'd be checking for them this soon. Unless, as another poster suggested, they are simply out to create havoc ASAP, which is a possibility in my mind.

 

[Tommy-Chi]

It was my birthday yesterday (July 30th) and my anniversary today (July 31st)

Now you tell us... Happy Birthday!!!!!

I cannot make the party on such a short notice.

Just going to have to drink this fifth of rum all by my lonesome now.

 

[Tommy-Chi]

I hope everyone had fun last minute shopping today! I did and now we wait for vape mail

I'll be keeping my credit cards hot and bothered for the next two to three months.

 

[Haktuspit]

In such limbo mode. Don't feel like I have a sufficient supply of mods/nic, feeling pretty good on tanks. Wouldn't mind a couple more Encom Voidrays.

I'd feel a lot better if this 2L of nic was where I am going. Considering shipping it all and ordering enough HHV to last me until I leave.

 

[Iron Molly]

I have part 2 of an order from Fasttech still somewhere in the system. It shipped July 28th and so far has shown to be going round and round between "Processed Through Facility" and "Origin Post is Preparing Shipment". It is still in Beijing, China. I think it will not beat 8/8, so, we shall see. Luckily it's only 2 drip tips as the other items became discontinued after my order was placed.

I have a another FT cart I've added a few things to, but I am waiting until the dust, if there is any, has settled. The only issue I foresee with the FDA is that perhaps they might want to inspect for new items (released after 8/8), but I can't think they'd be checking for them this soon. Unless, as another poster suggested, they are simply out to create havoc ASAP, which is a possibility in my mind.

My package is taking the same route as yours. Shipped same date, July 28. It's been "processed through facility" in Beijing twice. Now "preparing to ship" for the second time. Must be something with that batch.

 

[Tommy-Chi]

Has anyone ordered from NN recently? I placed an order 7/23 and so far only have rec'd the we are processing your order. I know they are swamped. Their order volume barometer is "red" which it was the last time I ordered from them but the product shipped 5 days later. It's no biggie, just wondering if others are experiencing the same delay.

I rcvd two orders from them making a gallon in July. Just reply back to that email on Tuesday if they do not update you. I'll bet they are swamped.

 

[Tommy-Chi]

Is she dropping her equipment? Lanyard comes to mind or something she can put her unit in like a cup or something??

Anyone have any tips on mounting lanyards to mods (of all sorts) and where to get any neat vaping related lanyards?