Are you done stocking up?

[Myrany]

These are OEM REO bottles:
6mL Natural Cylinder Bottle with 13mm Dropper Cap | U.S. Plastic Corp.
Many use other silicone bottles that fit tho.

Thanks for posting that I seriously couldn't remember the size. I bought a big bag of them years ago and haven't had to go looking since.

 

[bnrkwest]

tubing
Tygon® SPT 3350 Sanitary Silicone Tubing | U.S. Plastic Corp.
Spec as per the maker of the REO
All reos wood or metal use this tubing one tubing for all. If someone breaks this tubing there doing something wrong
Tygon® Sanitary Silicone Tubing 1/16" ID x 3/16" OD with 1/16" Wall

Bottles if you have the old style keep the drilled lid for the tube and just sub in a dropper bottle that will screw into it (Can't remember if it is 5 mL or 10 mL). I bought a bunch of those bottles cheap on amazon years ago.

Silly trick for traveling with a REO if it uses the old bottles. What I do is take 2 18650 battery boxes. In one I put 2 batteries. In the other I put 2 full bottles with the closed cap. When I need liquid I just unscrew the empty bottle and screw on a full one from my box. Then put the lid from the full one on the empty one and stick the empty in the box. No muss no fuss. Its done in seconds.

Good info thanks!

 

[bnrkwest]

These are OEM REO bottles:
6mL Natural Cylinder Bottle with 13mm Dropper Cap | U.S. Plastic Corp.
Many use other silicone bottles that fit tho.

Thank you!

 

[bnrkwest]

My REOs have been my daily drivers since 2013! Still going strong. The heat spring really works in case of a short. Mine collapsed so fast I didn't even know I had had a short. I was sitting there pushing the button and trying to figure out why it wasn't giving me vapor. LOL

Do you have any idea where to get extra springs?

 

[Myrany]

Thank you I actually had a Reo mini but never used it, just sold it and was looking for s full size Reo, thrilled I got the P67's !

I've never had a P67. With my grands what I set up is a .7 ohm coil single round wire. For me that works out this way. If I change the battery and the bottle at the same time I never drain the battery too low and I use about 4/5 of the bottle and am down into the its hard to squonk territory on the original old style bottle.

I haven't used the fancy soft silicon bottles on REOs enough to have it down to that kind of science.

 

[Myrany]

Do you have any idea where to get extra springs?

Now that REO is out of business I have no idea. I bought backups after the one time I collapsed one and before REO closed. Maybe someone else might know.

Seriously I have only shorted that one time in 2013 and it was due to a badly made atty. Haven't had a problem since then. I am absolutely .... about how I build and testing for shorts on a regulated mod or ohms reader.

 

[bnrkwest]

I've never had a P67. With my grands what I set up is a .7 ohm coil single round wire. For me that works out this way. If I change the battery and the bottle at the same time I never drain the battery too low and I use about 4/5 of the bottle and am down into the its hard to squonk territory on the original old style bottle.

I haven't used the fancy soft silicon bottles on REOs enough to have it down to that kind of science.

Good system! I was vacillating between the Woodvilles and P67's, but settled on the P67's, but always loved the woodvilles too.

 

[Myrany]

Good system! I was vacillating between the Woodvilles and P67's, but settled on the P67's, but always loved the woodvilles too.

My 2 most prized vaping possessions are my Woodville and my Dragon Provari.

Strangely my Woodville has one of the soft silicon bottles (one of the very early ones) and I find I don't like the bottle and will likely switch it out. The bottle it has is WAY too soft and I end up oversquonking and making a huge mess as the woodys don't have any catch cup really so the liquid just goes everywhere.

 

[bnrkwest]

I wonder if a silver bullet hot spring would work in a Reo? Still searching

 

[Myrany]

I wonder if a silver bullet hot spring would work in a Reo? Still searching

Here is the thing. At least on the grands. THe heat spring has a little tab that lets it screw into the bottom of the REO. Otherwise a Beryllium heat spring of the right size would work. The problem becomes how to attach it. Yes the originals are Beryllium.

If I was desperate I probably would try to rig a way to attach it.

EDIT: I have no idea how the heat spring is done in P67

 

[puffon]

I wonder if a silver bullet hot spring would work in a Reo? Still searching

You could ask twistedthrottle if he has any spare springs he could sell you.
I don't have a P67 so I'm not sure if they are the same as a Reo Grand spring.

 

[UncLeJunkLe]

There must be a place to buy the same springs for those Reos. I highly doubt those springs were made to proprietary specs just for Reo. Maybe searching on the forum here would turn up some sources for the springs?

 

[bnrkwest]

There must be a place to buy the same springs for those Reos. I highly doubt those springs were made to proprietary specs just for Reo. Maybe searching on the forum here would turn up some sources for the springs?

I found a place that will make any beryllium copper spring you want, but I wonder what minimum amount would be 10,000??? LOL

 

[bnrkwest]

I had a bunch of extra mini springs I sold but I think they were too small for a full sized Reo.

 

[sky4it]

Some flavor vendors have changed their names and positioned themselves as something other than vaping related, selling nothing at all related to nicotine or vaping - just flavors and some even sell home brewing supplies - and do not mention vaping on their sites. So from a legal standpoint, I would say the answer is no, they don't have to comply with PACT Act. No one can prove they are selling flavors to vapers.

If I were them, I would adopt a policy that a certain nicotine seller has adopted, which is if you contact them with questions regarding/mentioning vaping, they will not answer you and if the email address you use is tied to an account in their store, they will terminate that account.

What are the names of the companies? I would like to keep a file of them.

 

[YoursTruli]

There must be a place to buy the same springs for those Reos. I highly doubt those springs were made to proprietary specs just for Reo. Maybe searching on the forum here would turn up some sources for the springs?

Looks like Rob did it himself
Reo Grand Srpings
Reo Grand Srpings

 

[YoursTruli]

@bnrkwest you could place a wanted in the classified here for the springs.

To add: or ask the seller if he has spares to include/sell you

 

[UncLeJunkLe]

What are the names of the companies? I would like to keep a file of them.

flavorjungle.com is one that changed their name (formerly ecigexpress)
RiverSupplyCo.com changed their name from NicotineRiver but after their current stock is gone they won't be selling to consumers.

Other flavor vendors are
Bull City Flavors
Gremberry Farms
Hempnetix (heartlandvapes, now selling flavors on teir CBD site)
OneStopDIYChop.com

There are others I'm sure but I'm not a DIY chef like many others here so I don't know them all. You'll find more floating around the DIY section of the forum.

 

[UncLeJunkLe]

Looks like Rob did it himself
Reo Grand Srpings
Reo Grand Srpings

That's shocking that they made their own springs. I still say you could probably find suitable replacements somewhere on the internet.

EDIT: Upon some searching, apparently there aren't many options for buying these types of springs.

 

[Doffy]

Fuse mod
Or
Remove hotspring. Replace it with a bolt.

Both improve performance and are well documented on ECF