Are you done stocking up?

[phonedude]

Right. Totally again, but you guys are always here. Sorry to interrupt but if you had the money and want a mech which one?
View attachment 594413
Or...
View attachment 594415 The GP paps (top) is from the outlet & could have a blemish, is only 18500 and $75 ha. I mean €75
The Gus Lord (below) is normal retail, telescopic and €110
Opinions please

I would have to have both. They are beautiful.

 

[bnrkwest]

Something else I'm going to try with my kayfun...
You know how when you take it apart you lose juice. Well, I've been wracking my brain for something other than a paper towel to plug that hole.
Well, I've got a new package of those expandable ear plugs.
You roll it, place it in the end of the kayfun, and then it will expand to fit.
I tried one last night, but just to see if it would fit and expand, it DID!!
Now I need to see if it will work in reality.

The thing that might be the thing that won't work it the top of the bell cap.
It had an imprint when I removed it of the top of it, so...I'll have to try.
Anyway, that's the next experiment.
If someone gets to it before me, please post your results, otherwise I will in the next day or so.

Good idea!

 

[bnrkwest]

Well I am charging my other batt in the charger before I put it in the other Radius, charger is in a cake pan

 

[bnrkwest]

Here the Crystal trinket box I found, works perfect for the Radius holder

 

[LoriP1702]

Here the Crystal trinket box I found, works perfect for the Radius holder
View attachment 594449

Very nice!

 

[ScandaLeX]

Something else I'm going to try with my Kayfun...
You know how when you take it apart you lose juice. Well, I've been wracking my brain for something other than a paper towel to plug that hole.
Well, I've got a new package of those expandable ear plugs.
You roll it, place it in the end of the Kayfun, and then it will expand to fit.
I tried one last night, but just to see if it would fit and expand, it DID!!
Now I need to see if it will work in reality.

The thing that might be the thing that won't work it the top of the bell cap.
It had an imprint when I removed it of the top of it, so...I'll have to try.
Anyway, that's the next experiment.
If someone gets to it before me, please post your results, otherwise I will in the next day or so.

Can we get this on video???

 

[Two_Bears]

No, what is that?
ETA: Okay, I googled, that looks cool.
Do you have one, and does it work well?

Itsva Shaft that goes where the drip tip sits. Unscrew the base and tge Tank slides down the shaft so you can rewick or rebuild the coil without dumping the Juice. Reassemble the base, barrel abd chimney place it upside down and slide the tank with Juice up and reassemble your Kayfun without dumping the juicd.

No i havent tried it but the idea is sound.

I havent tried one because i use the very short bell cap that uses NO chimney at all.

This woukd only work on tanks that uses the Nano or standard chimney.

 

[LoriP1702]

Can we get this on video???

Nope....

Itsva Shaft that goes where the drip tip sits. Unscrew the base and tge Tank slides down the shaft so you can rewick or rebuild the coil without dumping the Juice. Reassemble the base, barrel abd chimney place it upside down and slide the tank with Juice up and reassemble your Kayfun without dumping the juicd.

No i havent tried it but the idea is sound.

I havent tried one because i use the very short bell cap that uses NO chimney at all.

This woukd only work on tanks that uses the Nano or standard chimney.

Yeah, it sounds (and looks) like just the thing to have.

 

[Zutankhamun]

And these right here are the only mechs I have for the vapocalypse.
I looked at other stuff I thought I might wanna add but since owning GP products, no other mechs have really screamed 'buy buy buy'!

emailing the guy from GP paps hopefully something nice is dug out for me. They are rated really highly.

I would have to have both. They are beautiful.

I wish. Can't even afford one really but i just have to have it to get me through these grim penniless times. I'll try for one now probably the paps and then get the Lord in a month

 

[LoriP1702]

emailing the guy from GP paps hopefully something nice is dug out for me. They are rated really highly.



I wish. Can't even afford one really but i just have to have it to get me through these grim penniless times. I'll try for one now probably the paps and then get the Lord in a month

Not sure if you've found your way here or not...lots of great threads.
VapourArt

 

[Zutankhamun]

Nope....


Yeah, it sounds (and looks) like just the thing to have.

Hey Lori. It's cool, my horrible photos kinda show it working. Just take the drip tip off. Push the Kayfill in, and then unscrew the build deck no worries.

Tbh though, you shouldn't ever need it. I don't pass my wicks through the chimney. I deal with the wicks first. I cut them then place them with juice so they are pushed in against the deck and not too deep to make sure they are not in the channels.
Horrible pics, hope you understand what I mean.

That is the Kayfill inside the kayfun pushed in place of the drip tip.

This is where I push the cotton against the sides instead of after the chimney is on. Cut it the right length. Don't push it too tight.
Then put your chimney on. With good cotton, apart from different juice you shouldn't need to rewick till the juice is finished.

Good luck

 

[phonedude]

I don't take much precaution when charging my batteries. I do not charge the removable batteries in the mods though. And I always make sure there are no batteries on the charger when I leave the house or go to bed.

But I charge them on a plastic storage box in my back bedroom.

I will get a pyrex baking dish I think. That would also give me a place to keep the batteries that need charging. And it would look nicer.

 

[Two_Bears]

Nope....


Yeah, it sounds (and looks) like just the thing to have.

I saw the Kayfill but when i saw that i can't use it because my Kayfun doesnt use a chimney at all and could not work for me. But i kept it in my data base just in case it may work for Someone else.

It should also work for tge Orchid Atomizers too.

 

[LoriP1702]

Hey Lori. It's cool, my horrible photos kinda show it working. Just take the drip tip off. Push the Kayfill in, and then unscrew the build deck no worries.

Tbh though, you shouldn't ever need it. I don't pass my wicks through the chimney. I deal with the wicks first. I cut them then place them with juice so they are pushed in against the deck and not too deep to make sure they are not in the channels.
Horrible pics, hope you understand what I mean.
View attachment 594461
That is the Kayfill inside the kayfun pushed in place of the drip tip.
View attachment 594467 This is where I push the cotton against the sides instead of after the chimney is on. Cut it the right length. Don't push it too tight.
Then put your chimney on. With good cotton, apart from different juice you shouldn't need to rewick till the juice is finished.

Good luck

Thanks. Great pics. Can't find any other than in UK Go figure.
I pull my fresh wick up through the barrel chimney, trim it to flush with the top of that, then tuck in down in where it goes.
A trick a friend shared, and I've had zero problems with wicking, or guessing the length. Quick and easy to trim too.

 

[LoriP1702]

I saw the Kayfill but when i saw that i can't use it because my Kayfun doesnt use a chimney at all and could not work for me. But i kept it in my data base just in case it may work for Someone else.

It should also work for tge Orchid Atomizers too.

It's not THAT big of a deal that I get one. I've been getting along just fine without one, just would be handy.
I'm going to try the ear plug too.

 

[ScandaLeX]

ScandaLex, did you hear about the e-Paps electronic mod that's coming out? Confirmed by Perseas, but no details...

My bank account just screamed GET OFF ECF!!!!
No....havent heard of it....me thinks I need to look this up! HIGH FIVE to ya!!!!

 

[Two_Bears]

Thanks. Great pics. Can't find any other than in UK Go figure.
I pull my fresh wick up through the barrel chimney, trim it to flush with the top of that, then tuck in down in where it goes.
A trick a friend shared, and I've had zero problems with wicking, or guessing the length. Quick and easy to trim too.

I have seen the Kayfill at Fasttech about a month ago but not available now. I see them on eBay time to time.

 

[Zutankhamun]

Thanks. Great pics. Can't find any other than in UK Go figure.
I pull my fresh wick up through the barrel chimney, trim it to flush with the top of that, then tuck in down in where it goes.
A trick a friend shared, and I've had zero problems with wicking, or guessing the length. Quick and easy to trim too.

Oh cool. I thought that way weren't working for you and that's why you wanted the Kayfill. Yeah, that way of putting the cotton through the chimney first is all over YouTube. Just never worked for me. Then I bought a Kayfill. Then I started doing it this way. Whatever works for you

BTW, it's all about UK. Germany ain't to far for shipping, neither is Greece or Switzerland. Kayfuns, phenomenons, squapes, lords and GP Paps. Yay!!!

Edit: MTL Kings over here in Europe. Everyone apart from the taifun if I'm not mistaken.
Squapes, kayfuns, phenomenon lite & zest, über toot, hurricanes, erlkonigin, calix, anything else???

 

[Sara Love]

Here the Crystal trinket box I found, works perfect for the Radius holder
View attachment 594449

Love it. The crystal trinket is perfect! Loving the purple or should I say concord radius and the drip tip goes very well.

 

[LoriP1702]

I have seen the Kayfill at Fasttech about a month ago but not available now. I see them on eBay time to time.

Yeah, looked on eBay too.
Well, it's no big deal. I'll work it out.

Oh cool. I thought that way weren't working for you and that's why you wanted the Kayfill. Yeah, that way of putting the cotton through the chimney first is all over YouTube. Just never worked for me. Then I bought a Kayfill. Then I started doing it this way. Whatever works for you

BTW, it's all about UK. Germany ain't to far for shipping, neither is Greece or Switzerland. Kayfuns, phenomenons, squapes, lords and GP Paps. Yay!!!

I lose juice from the tank when I take it apart to clean the coil and re-wick. The rest was okay, just losing juice, makes a mess, etc.

Did you see that link I posted (a few back) for the VapourArt forum here?

ETA: I bought my Kayfuns from Canada, I just hated to spend extra for shipping for a part.