Are you done stocking up?

[Bea-FL]

That's how i have been doing.I don't plan to go to 0,but just a decrease.I started at 24mg,and dropped to 18mg,then 12mg,and those bigger drops were pretty rough,so once i got settled in at 12mg,i decided to go down 1mg at a time.When i get low on my adv and get ready to make a new 120ml bottle,i make it 1mg less than the last one,and so far it has worked really well,my most recent bottle that i use now is 10mg,and i didn't feel any difference at all.Once i get to 6mg,i will be happy and stay there.
On a side note,i had to use my son as a guinea pig first haha.I did his drops after every 30ml though,but he started at 10mg and is now at 4mg,and has no idea that i dropped him like that,so nothing has changed for him as far as he knows.

Our journey has been similar. I am 3/4 through my 10mg bottle. I do 100ml bottles at each nic level. If I do well at 6m i will try for 5 but no lower.

 

[Bea-FL]

Oh you're welcome, and I meant it. That is an awesome achievement!!
I've often wondered if I could do it, and if mine isn't as much or more the hand to mouth habit as it is the nice
I'll give reducing my nic "a go" at some point too.

i know the HTM is pretty important for me. vaping is also a good weight control tool for me.

 

[Bea-FL]

Well I'm sixty six and I stocked for 20 years! LOL So I suggest you up your stash. You don't want to be unprepped if you surprise yourself by living long LOL I have a stash of Cartos and Vivi coils for my 80's

Same age, same amount of stocking. And in case I cant coil in later years I have a good stash of pre-made!

 

[Two_Bears]

i know the HTM is pretty important for me. Vaping is also a good weight control tool for me.

A lot of people do that. Jim s Friend of mine hss two Kayfun Nano attys.
One is his nicotine fix during the day.

The other is a Dessert flavor for the evening when he gets the munchies.

 

[Two_Bears]

There has been questions and comments about my Compact Kayfun.

One person had never heard of a Kayfun that did not use a chimney so i thought i would Post a picture of the barrel screwed into the bell cap.

No chimney in there at all.

 

[BackDoc]

great Churchill quote Bears

 

[bnrkwest]

No brother you don't understand.

I only have 1 1/2 hands (three fingerson my left hand are curled up and useless from Duprodens contracture), and my eyesight is terrible something like 20 800. Even the big old E on the eye chart is blurry (i used to be a professional photograpber but my eyesight went to hell in a hand basket.

In 5-7 years i may be legally blind or unable to build my attys.

I have laid in about 50 premade coil heads for a Tank for when i can't see to build.

You may need to hire a younger friend to build for you, I am just now starting to build and not sure how long I will be able to do it so stocked up on Cartos and Carto tanks too just incase. I hope your eyes and hands hold up for you!

 

[bnrkwest]

uhhhh you all better live into your 90s. I won't have nobody to talk to when I'm in my 50s and 60s!!!

We'll do our best LOL

 

[bnrkwest]

Same age, same amount of stocking. And in case I cant coil in later years I have a good stash of pre-made!

 

[oplholik]

Sure NO problem.

Its a short bell cap.

$1.69 Free Shipping Replacement Acrylic Bell Cap for Kayfun Mini RTA Atomizer (Kayfun Mini Bell Cap, Acrylic, Translucent) at m.FastTech.com

Take the barrel, Kayfun base and a drip tip you already own

Screw tge barrel into tge bell cap. Screw on the base of tge fill the 2.5 ml Tank add a short drip tip and you are in business.

I screwed the little Kayfun on my Pico snd put a 17 mm drip tip on the Kayfun.

From the bottom of the Pico to the top of the drip tip it is only 107 mm tall (just shy of 4 1/16 inches tall

Putting my Kayfun on the COV Mini Volt my mod snd RTA IS only 99 mm tall (3 7/8 inches tall.

Remember the barrel screws into the bell cap without using either the standard or nano chimney.

Sor sone reason with the mobile version of the ECF website i can only Post 1 link per message.

Will reply again with another link for a while RTA if you like direct lung vaping

Dang it, now I gotta order a couple of these. At least they are cheap.

 

[Two_Bears]

You may need to hire a younger friend to build for you, I am just now starting to build and not sure how long I will be able to do it so stocked up on Cartos and Carto tanks too just incase. I hope your eyes and hands hold up for you!

I will build as long as i can of my stash holds up.

 

[house mouse]

You may need to hire a younger friend to build for you, I am just now starting to build and not sure how long I will be able to do it so stocked up on Cartos and Carto tanks too just incase. I hope your eyes and hands hold up for you!

If I feel any hint of my ability to make coils start slipping my current plan is to work on each atomizer I own and put a coil in them and store them before I lose the ability completely. That should get me quite a bit further down the road by just dry burning and rewicking the coils I've pre-installed. Last ditch, I've got a bunch of cartomizers stored up. That's the best I could figure out for advancing age. Now, should I become senile and can't even remember how to fill an atomizer anymore, well......I got nothing for that.

 

[Two_Bears]

Dang it, now I gotta order a couple of these. At least they are cheap.

If you get 5 bell caps they are only $1.41 each.

I usually get 5 at a time. Only $7.05 for 5 of these.

$1.77 for barre
About $4 for a Kayfun base
$7.05 for 5 bellcaps

Less than $12 for an Atty with four spare bell caps.

 

[oplholik]

If you get 5 bell caps they are only $1.41 each.

I usually get 5 at a time. Only $7.05 for 5 of these.

$1.77 for barre
About $4 for a Kayfun base
$7.05 for 5 bellcaps

Less than $12 for an Atty with four spare bell caps.

I ordered 3 of these, $1.69 Replacement Acrylic Bell Cap for Kayfun Mini RTA Atomizer at FastTech - Worldwide Free Shipping
Also one of these, $5.43 Free Shipping Kayfun Monster Mini V3 Styled RTA Rebuildable Tank Atomizer (2.5ml) (Monster Mini V3, SS + PMMA (fuzzy)) at m.FastTech.com
I already have a few KFL lites to use the extra bell caps on.

I have one of these KFL's, that with changing the parts around I can shorten it up from 52.25mm, to about 39.30mm, but it's still quite heavy.

 

[bnrkwest]

I ordered 3 of these, $1.69 Replacement Acrylic Bell Cap for Kayfun Mini RTA Atomizer at FastTech - Worldwide Free Shipping
Also one of these, $5.43 Free Shipping Kayfun Monster Mini V3 Styled RTA Rebuildable Tank Atomizer (2.5ml) (Monster Mini V3, SS + PMMA (fuzzy)) at m.FastTech.com
I already have a few KFL lites to use the extra bell caps on.

I have one of these KFL's, that with changing the parts around I can shorten it up from 52.25mm, to about 39.30mm, but it's still quite heavy.

View attachment 597487

I bought several of these too awhile back but have not tried any yet

 

[bnrkwest]

Well I put the Radius sleeves on my Radius for longer lasting protection so my concord is now pink and the black is now blue I like the sleeves, not sure I would. I wish I could find sleeves for my tube Provari's but when I search for silicone sleeves I come up with sex enhancers ! LOL So anyone know if actual silicone sleeves for tube mods exist ???

 

[cats5365]

Well I put the Radius sleeves on my Radius for longer lasting protection so my concord is now pink and the black is now blue I like the sleeves, not sure I would. I wish I could find sleeves for my tube Provari's but when I search for silicone sleeves I come up with sex enhancers ! LOL So anyone know if actual silicone sleeves for tube mods exist ???

Have you tried just searching for lengths of silicone or vinyl tubing? You might be better off with a cut-to-measure tube to allow for the seams, buttons, and vent holes on a tube mod. As long as the inner diameter matches the outer diameter of your mod, it should work.

 

[bnrkwest]

Have you tried just searching for lengths of silicone or vinyl tubing? You might be better off with a cut-to-measure tube to allow for the seams, buttons, and vent holes on a tube mod. As long as the inner diameter matches the outer diameter of your mod, it should work.

I'll have to try that because I don't really like cold metal feel, a silicone sleeve would be great if I can find the right size. Need to measure the P3

 

[LoriP1702]

I'll have to try that because I don't really like cold metal feel, a silicone sleeve would be great if I can find the right size. Need to measure the P3

Or crochet something.

 

[cats5365]

I'll have to try that because I don't really like cold metal feel, a silicone sleeve would be great if I can find the right size. Need to measure the P3

A jwrap would work too if you just want to avoid the cold metal and didn't want the cushion and non-skid properties of silicone.