Thank you!! These will help so much!
You explained it all very well, so even I can do it. 
Thank you!! These will help so much!
You explained it all very well, so even I can do it. 
I'm just the opposite. I can't stand the feel of the silicone sleeves and love the touch of the cool metal in my hands. That's why I let all my mods run around naked. I do have some wraps to put on the provaris once they get seriously beat up and ugly though.I'll have to try that because I don't really like cold metal feel, a silicone sleeve would be great if I can find the right size. Need to measure the P3
The metal make my hands cold in winter and they start to ache, but in summer metal can get hot so I do like the silicone, but like the naked look better
Silicone thread???Or crochet something.
Well, my Dragon just came in. I got shipping notification on Wednesday evening, and somehow it got here today! It's definitely a great looking mod, and heavier than I expected.
Even though I have no toppers that are really appropriate for a low wattage device, I had to give it a test. So out came the RBA base for my TFV4, and I whipped up a quick 10 wrap 28g coil on a 2.5 mm rod. First of all, the RBA base on the TFV4 is a little funky IMHO, and I ended up having to trap my leads since one of the legs was too short to route to the clamps. Any ways it came out at around 1.8 ohms. Wicked it up with JOC, and gave it a test fire on my IPV3 at 22 watts, everything seemed to work fine.
I finished reassembling the tank and popped it on the ProVari set at 5 volts and the airflow turned down to nearly nothing. The first three or four hits were ok, nothing spectacular but not horrible and then the 5 puff was a lovely burnt hit. I think I need to revisit my wicking and drop down the VG levels before I try it again. That or just wait til the KF mini gets here. Frankly the TFV4 looks like a joke on top of the ProVari anyway so I'll probably wait til the KF takes the long ride here. Overall though, I'm impressed with the ProVari, it should make a perfect tootle puffer rig with the Kayfun.
I also placed my order at osdiy. Beyond restocking all my TFA flavors, I picked up a bunch of the OSF and OSB, a few Cap and FA flavors and 9ml samples of all the Real Flavor lines the had. Over a hundred bucks later and I have a bunch of new flavors to try out!
Sent from my HUAWEI H892L using Tapatalk
Even though I have no toppers that are really appropriate for a low wattage device, I had to give it a test. So out came the RBA base for my TFV4, and I whipped up a quick 10 wrap 28g coil on a 2.5 mm rod. First of all, the RBA base on the TFV4 is a little funky IMHO, and I ended up having to trap my leads since one of the legs was too short to route to the clamps. Any ways it came out at around 1.8 ohms. Wicked it up with JOC, and gave it a test fire on my IPV3 at 22 watts, everything seemed to work fine.
I finished reassembling the tank and popped it on the ProVari set at 5 volts and the airflow turned down to nearly nothing. The first three or four hits were ok, nothing spectacular but not horrible and then the 5 puff was a lovely burnt hit. I think I need to revisit my wicking and drop down the VG levels before I try it again. That or just wait til the KF mini gets here. Frankly the TFV4 looks like a joke on top of the ProVari anyway
so I'll probably wait til the KF takes the long ride here. Overall though, I'm impressed with the ProVari, it should make a perfect tootle puffer rig with the Kayfun.I also placed my order at osdiy. Beyond restocking all my TFA flavors, I picked up a bunch of the OSF and OSB, a few Cap and FA flavors and 9ml samples of all the Real Flavor lines the had. Over a hundred bucks later and I have a bunch of new flavors to try out!
Sent from my HUAWEI H892L using Tapatalk
Well no.Silicone thread???
What about using a bunch of silicon rings to form a sleeve?
My copper nemmys are anxiously awaiting wraps. They are very unhappy in their present condition. Wraps in the mail are gold and turquoise mosaic, not identical. Summer stone 5 & 4.
Last edited:
You are going to love these I think. The French Toast and Bread Pudding are my favorites so far. The Aged Bourbon Cream and Apple Pie have potential as well but I only mixed them up a day or 2 ago. The Baklava and Pumpkin Pie are coming along nicely also. I have a huge cart filled direct with them that I would like to get down the road and pick up locally but I have so many flavors on hand right now to keep me vaping well into next year I can't justify the cost of that cart until later this, or early next, year.
Same here silicon sleeves just don't feel right, but if I was a butter fingers I would reconsider.
I know what you mean @Fozzy71 ! I just found their direct site, and I keep saying "ooh got to try that, and that, and that..." I'm thinking I need to organize my DIY stash and get a pic of the flavors I've got!
I need to put a hold on my buying, since I've got a trip to DC planned for next month, and Christmas isn't too far away. With four litres of nic, 6 mods, and 10 attys that can be rebuilt, I'm stocked up enough to weather the FDA storm. I just keep getting shinyitis seeing all the cool toys. Not to mention that I think I have a minor addiction to shopping online!
Sent from my HUAWEI H892L using Tapatalk
I need to put a hold on my buying, since I've got a trip to DC planned for next month, and Christmas isn't too far away. With four litres of nic, 6 mods, and 10 attys that can be rebuilt, I'm stocked up enough to weather the FDA storm. I just keep getting shinyitis seeing all the cool toys. Not to mention that I think I have a minor addiction to shopping online!
Sent from my HUAWEI H892L using Tapatalk
Oh, I didn't think about the butterfingers. Good point. Fortunately I've got sticky paws and rarely drop anything.
I don't mind the metal feel but I hate the coating on the Glovari. It bugs me so much, I don't use it. I think the simplest solution is to use the vape bands which would form a sleeve. I did that part way for the glo and need to get more of the same color bands.
Very easy.Thank you!! These will help so much!
A couple of silicone rings would help keep it from slipping. There are wraps for the Provari tube mods.
That could work for a rainbow look
I may try that. I have measurements for P3 it would be 7/8 or 22 mm inner diameter silicone tube.
I must try theses !
Similar threads
