Are you done stocking up?

Two_Bears

Vaping Master
ECF Veteran
Verified Member
Jul 4, 2015
7,045
16,673
Northern Arizona
Thanks for the recommendation!! I'm going to give these a shot, for sure!
I got mine for $5.43 with the Kayfun Monster Mini V3 base after almost killing mt Silverplay Nano on tge bus.

As cheap as they were i wasnt expecting them to be worth a _____. I got this as a beater Atty but it grew on me

I have been vaping thus beastie for 15 months. The first 10 was with the Monster base but i wanted MTL vaping 5 months ago abd replaced tge Monster Mini V3 base for the Kayfun lite plus V2.

After 15 months i am still vaping with the same Tank, drip tip, abd barrel.

I was not expecting tge acrylic bell cap to last more than a month or two but its still tricking.

Since starting these stripped tge threads on tge Two piece chimney for my Goblin Mini, abd sold 2/3 of the Silverplay Nano attys i laid back for my Vapocalpse.

Tge Silverplay Nano and Goblin Mini have better flavor but plenty spare parts i can keep this going practically FOREVER!
 

DancingHeretik

Dancing in the Chaos
ECF Veteran
Verified Member
Mar 20, 2011
8,837
62,106
San Antonio, TX
If anyone is thinking about getting an iStick Pico 75W...this place just got more in. Their regular price is $30, but using the code Turkey will get you 30% off, so they're only $21 + you get Free S/H with $14+ purchase!

Eleaf iStick PICO Simple Kit - $30.00 : Rocky Mountain Vapor, The Mountain top of Electronic Cigarettes

I've ordered lots of things from them and so have friends. Their customer service by phone is terrific (actually get a live, friendly, helpful person), and their shipping is fast, too!
Thank you! I've been wanting a black Pico!
 

Two_Bears

Vaping Master
ECF Veteran
Verified Member
Jul 4, 2015
7,045
16,673
Northern Arizona
Thanks for the recommendation!! I'm going to give these a shot, for sure!
The complete parts list for things Kayfun is in my blog.

You only need four pieces.

Kayfun base.

Lite plus V2 if you like MTL
Monster Mini V3 if you like direct lung

Barrel goes around build deck

Flat top bell cap

Drip tip.

Here's the way I set them up.

Screw the barrel tightly into the bell cap. When i turn the atty upside down and unscrew the base tge barrel stays in tge bell cap and you need NO tool or catch the eJuice in a shot glass. For me to sell two of my Silverplay Nano ( favorite Atty of all time; you know i like it.

If i could get spare parts for tge Silverplay Nano i would be using them today

This little Kayfun is pocket Friendly, very good flavor, snd all the spare parts to keep it going forever.
 

WillyZee

Vaping Master
ECF Veteran
Verified Member
Sep 23, 2013
9,930
36,929
Toronto

even though I only use authentic Kayfuns topped with cheap bell caps, I am very happy I put together 40 of the FT Kayfun clones with the nano chimneys.

I figured, what good are a bunch of spare ProVaris if I don't have tanks for them :blink:

I would be not be surprised if we never see those nano chimneys offered again.
 

Sugar_and_Spice

ECF Guru
ECF Veteran
Verified Member
Sep 11, 2010
13,663
35,225
between here and there
even though I only use authentic Kayfuns topped with cheap bell caps, I am very happy I put together 40 of the FT Kayfun clones with the nano chimneys.

I figured, what good are a bunch of spare ProVaris if I don't have tanks for them :blink:

I would be not be surprised if we never see those nano chimneys offered again.
Would these work?

$1.98 Replacement Chimney for Kayfun - stainless steel / ohm logo at FastTech - Worldwide Free Shipping
or this?

$2.26 Kayfun Nano RTA Replacement Stainless Steel Long + Short Chimneys 2-pack - 12mm + 20.2mm at FastTech - Worldwide Free Shipping

:)
 

DancingHeretik

Dancing in the Chaos
ECF Veteran
Verified Member
Mar 20, 2011
8,837
62,106
San Antonio, TX
The complete parts list for things Kayfun is in my blog.
Which base is better, the one in oplholik's post or the one in Two_Bears' blog (Replacement Base for 22mm Kayfun Lite Plus V2 & Kayfun Lite Five Pawns)?

I bought this base a long time ago. It was total junk. I want to be sure that doesn't happen again.
 
  • Like
Reactions: oplholik

JustWondering1

Vaping Master
ECF Veteran
Aug 29, 2015
4,228
13,182
The Kayfun in question is in my Avatar.

If you want to build one of your own. A comprehensive parts list is in my blog.


Which of the parts listed below in your blog would I need to get to make the Compact Kayfun Lite with Bellcap?

Kayfun Links at FT
Published by Two_Bears in the blog Two_Bears's blog. Views: 22

$0.88 Free Shipping Replacement Polycarbonate Tank for Kayfun 3.1 / Kayfun Lite (PC Tank, Purple) at m.FastTech.com
M Tank

$0.91 Free Shipping Replacement Screws for Kayfun V4 (5-Pack) (Screws, 5-Pack) at m.FastTech.com
Spare screws

$1.48 Free Shipping Spare Parts Kit for Kayfun V4 RTA Atomizers (Spare Parts Kit) at m.FastTech.com
Spare O rings

$1.66 Free Shipping Acrylic Kayfun Bell Cap (Kayfun Bell Cap, Purple (34mm)) at m.FastTech.com
Standard bell cap for Kayfun. Some of them comes with Sillicone plugs and O Rings. I don't recommend them for two reasons.

1. You have to dump your Juice or get a Kayfill.
2. This bellcap only holds 2.8 ml. The flat too bell cap holds 2.5 ml and you can easily pull tge deck to wick or build without dumping Juice.

$1.69 Free Shipping Replacement Acrylic Bell Cap for Kayfun Mini RTA Atomizer (Kayfun Mini Bell Cap, Acrylic, Translucent) at m.FastTech.com
Bell caps i use. On my short Kayfun

$2.26 Free Shipping Replacement Omega Styled Chimney for Kayfun RTA (Chimney & Base, Omega Logo, Silver) at m.FastTech.com
Barrel with Nano chimney

$2.26 Free Shipping Kayfun Nano RTA Replacement Stainless Steel Long + Short Chimneys (Kayfun Nano, Chimney, Long + Short) at m.FastTech.com
Two Kayfun chimneys both Nano and standard

$2.31 Free Shipping Kayfun Bell Cap Kit w/ 510 Drip Tip (Kayfun Bell Cap Kit, Pink (w/ drip tip) (PMMA)-B) at m.FastTech.com
Looks like bell cap above but doesnt work properly.

$2.72 Free Shipping Acrylic Kayfun Top Cap (Top Cap, PMMA, Red) at m.FastTech.com
Want to top fill a Kayfun lite +? Never used it so NO comment.

$3.73 Free Shipping Replacement Base for Kayfun Monster V3 RTA Atomizer (Base (Kayfun Monster V3), Silver) at m.FastTech.com
This is a base for 528 Customs Monster V3. This will NOT fit the standard Kayfun because the standard barrel wont fit these threads.

$4.00 Free Shipping Replacement Base for 22mm Kayfun Lite Plus V2 & Kayfun Lite Five Pawns (Base (Kayfun Lite Plus V2), Silver) at m.FastTech.com
The Kayfun base i use

$4.11 Free Shipping Replacement Base for Kayfun Monster V3 RTA Atomizer (Base (Kayfun Monster V3), Gold) at m.FastTech.com
Kayfun Monster Mini V3 that can be used under a standard Kayfun if you want direct lung vaping.

$4.11 Free Shipping Replacement Base for Kayfun Monster V2 RTA Atomizer (Base (Kayfun Monster V2), Gold) at m.FastTech.com
Kayfun Monster Mini V2. Don't recommend. V3 above is way better.

$5.85 Free Shipping Replacement Acrylic Bell Cap for Kayfun Mini RTA Atomizer (5-Pack) (Kayfun Mini Bell Cap, Acrylic, Translucent, 5-Pack) at m.FastTech.com
5 flat top bell caps at a great price.

$9.30 Free Shipping Kayfun Lite Pawns Styled RTA Rebuildable Tank Atomizer (2.5ml) (Kayfun Lite Pawns, SS + PC, Silver - B) at m.FastTech.com
Complete Kayfun clone RTA.

https://m.fasttech.com/products/302...un-lite-plus-v2-rta-rebuildable-tank-atomizer
Another complete Kayfun clone RTA.

$13.01 Free Shipping Kayfun Quartz Tank Kit (5-Pack) (Kayfun Quartz Tank Kit, SS + Glass, Green, 5-Pack) at m.FastTech.com
Looks good but held together by O rings. Avoid.

https://m.fasttech.com/products/302...fun-v3-1-es-styled-rebuildable-atomizer-kit-4
Kayfun 3.1 complete RTA

$11.36 Free Shipping Refilling Tool for Kayfun Lite Five Pawns Atomizer (5-Pack) (Refilling Tool, 316 SS, 5-Pack) at m.FastTech.com
The Kayfill tool for standard Kayfun attys. Works with full sized Kayfun attys and 2.8 ml bell caps (with O ring)

Will not work with the flat top Kayfun bellcaps but not necessary. I PULL the deck all the time for building or wicking and never spill a drop of Juice unless i accidentaly knock the bell cap over.

Thanks in advance!!
 

Two_Bears

Vaping Master
ECF Veteran
Verified Member
Jul 4, 2015
7,045
16,673
Northern Arizona
Which of the parts listed below in your blog would I need to get to make the Compact Kayfun Lite with Bellcap?

Kayfun Links at FT
Published by Two_Bears in the blog Two_Bears's blog. Views: 22

$0.88 Free Shipping Replacement Polycarbonate Tank for Kayfun 3.1 / Kayfun Lite (PC Tank, Purple) at m.FastTech.com
M Tank

$0.91 Free Shipping Replacement Screws for Kayfun V4 (5-Pack) (Screws, 5-Pack) at m.FastTech.com
Spare screws

$1.48 Free Shipping Spare Parts Kit for Kayfun V4 RTA Atomizers (Spare Parts Kit) at m.FastTech.com
Spare O rings

$1.66 Free Shipping Acrylic Kayfun Bell Cap (Kayfun Bell Cap, Purple (34mm)) at m.FastTech.com
Standard bell cap for Kayfun. Some of them comes with Sillicone plugs and O Rings. I don't recommend them for two reasons.

1. You have to dump your Juice or get a Kayfill.
2. This bellcap only holds 2.8 ml. The flat too bell cap holds 2.5 ml and you can easily pull tge deck to wick or build without dumping Juice.

$1.69 Free Shipping Replacement Acrylic Bell Cap for Kayfun Mini RTA Atomizer (Kayfun Mini Bell Cap, Acrylic, Translucent) at m.FastTech.com
Bell caps i use. On my short Kayfun

$2.26 Free Shipping Replacement Omega Styled Chimney for Kayfun RTA (Chimney & Base, Omega Logo, Silver) at m.FastTech.com
Barrel with Nano chimney

$2.26 Free Shipping Kayfun Nano RTA Replacement Stainless Steel Long + Short Chimneys (Kayfun Nano, Chimney, Long + Short) at m.FastTech.com
Two Kayfun chimneys both Nano and standard

$2.31 Free Shipping Kayfun Bell Cap Kit w/ 510 Drip Tip (Kayfun Bell Cap Kit, Pink (w/ drip tip) (PMMA)-B) at m.FastTech.com
Looks like bell cap above but doesnt work properly.

$2.72 Free Shipping Acrylic Kayfun Top Cap (Top Cap, PMMA, Red) at m.FastTech.com
Want to top fill a Kayfun lite +? Never used it so NO comment.

$3.73 Free Shipping Replacement Base for Kayfun Monster V3 RTA Atomizer (Base (Kayfun Monster V3), Silver) at m.FastTech.com
This is a base for 528 Customs Monster V3. This will NOT fit the standard Kayfun because the standard barrel wont fit these threads.

$4.00 Free Shipping Replacement Base for 22mm Kayfun Lite Plus V2 & Kayfun Lite Five Pawns (Base (Kayfun Lite Plus V2), Silver) at m.FastTech.com
The Kayfun base i use

$4.11 Free Shipping Replacement Base for Kayfun Monster V3 RTA Atomizer (Base (Kayfun Monster V3), Gold) at m.FastTech.com
Kayfun Monster Mini V3 that can be used under a standard Kayfun if you want direct lung vaping.

$4.11 Free Shipping Replacement Base for Kayfun Monster V2 RTA Atomizer (Base (Kayfun Monster V2), Gold) at m.FastTech.com
Kayfun Monster Mini V2. Don't recommend. V3 above is way better.

$5.85 Free Shipping Replacement Acrylic Bell Cap for Kayfun Mini RTA Atomizer (5-Pack) (Kayfun Mini Bell Cap, Acrylic, Translucent, 5-Pack) at m.FastTech.com
5 flat top bell caps at a great price.

$9.30 Free Shipping Kayfun Lite Pawns Styled RTA Rebuildable Tank Atomizer (2.5ml) (Kayfun Lite Pawns, SS + PC, Silver - B) at m.FastTech.com
Complete Kayfun clone RTA.

https://m.fasttech.com/products/302...un-lite-plus-v2-rta-rebuildable-tank-atomizer
Another complete Kayfun clone RTA.

$13.01 Free Shipping Kayfun Quartz Tank Kit (5-Pack) (Kayfun Quartz Tank Kit, SS + Glass, Green, 5-Pack) at m.FastTech.com
Looks good but held together by O rings. Avoid.

https://m.fasttech.com/products/302...fun-v3-1-es-styled-rebuildable-atomizer-kit-4
Kayfun 3.1 complete RTA

$11.36 Free Shipping Refilling Tool for Kayfun Lite Five Pawns Atomizer (5-Pack) (Refilling Tool, 316 SS, 5-Pack) at m.FastTech.com
The Kayfill tool for standard Kayfun attys. Works with full sized Kayfun attys and 2.8 ml bell caps (with O ring)

Will not work with the flat top Kayfun bellcaps but not necessary. I PULL the deck all the time for building or wicking and never spill a drop of Juice unless i accidentaly knock the bell cap over.

Thanks in advance!!

Could not copy snd psste so will ludte prices that should work well enough

91 cents 5 spare screws. Having spare screws for trapping leads is useful

1.48. Spare Kayfun O Rings.

$1.69 flat top bell cap

$2.26. Kayfun barrel with Nano chimney. You only need tge barrel with thr $1.68 bellcap above

$4.00 Kayfun lite plus V2 base i use

$4.11 Kayfun Monster Mini V3 base if you want direct lung vaping. Do NOT get the Monster Mini V2 its lousy.
 

Two_Bears

Vaping Master
ECF Veteran
Verified Member
Jul 4, 2015
7,045
16,673
Northern Arizona

Two_Bears

Vaping Master
ECF Veteran
Verified Member
Jul 4, 2015
7,045
16,673
Northern Arizona
Yeah @DancingHeretik go with the one Two_Bears recommends, he's the expert here on what goes together best. :)
Sorry I got in there and confused everything.
Thanks for compliment.

I don't know if i'm an expert but put a LOT of them together.
 

JustWondering1

Vaping Master
ECF Veteran
Aug 29, 2015
4,228
13,182
Could not copy snd psste so will ludte prices that should work well enough

91 cents 5 spare screws. Having spare screws for trapping leads is useful

1.48. Spare Kayfun O Rings.

$1.69 flat top bell cap

$2.26. Kayfun barrel with Nano chimney. You only need tge barrel with thr $1.68 bellcap above

$4.00 Kayfun lite plus V2 base i use

$4.11 Kayfun Monster Mini V3 base if you want direct lung vaping. Do NOT get the Monster Mini V2 its lousy.

Perfect!! Thank you very much. The next FT order I make will have these items in it for sure. I love my EH Pro KFL+ but I don't use it often because it's a pain to fill! This atty sounds like a dream come true!!
 

JCinFLA

Vaping Master
ECF Veteran
Verified Member
Oct 21, 2015
9,412
44,655
I ordered the original Bell Caps recommended on here on Sept. 10th, and when they came in...no regular 510 drip tips would fit them, except for the silicone ones...and they'd keep popping out of the bell cap. I'd ordered 2 sets of 5 of them, and they were SKU #5925200. Upon looking at them with my jeweler's headset, it was because the hole for the drip tip was tapered.

The bell caps that DO fit, and were recommended in a later post, that you can use any 510 drip tip in, are these that I later ordered and have been using: SKU #3743901 (clear) and also SKU #3743903 (blue). The other colors that all begin with the 37439 should work, too.

I also ordered these bases, and have ordered many more of them since then, and they all work great and are holding up well. No problems at all with them: SKU #2019500 which are the SS ones, and SKU # 2128901 which are the GP ones.

ETA: The chimney bases I ordered originally are now discontinued, but...the ones I posted about earlier tonight will also work, since they're the same diameter & height, and the threading is the same. They just cost alittle more than the discontinued ones cost.

Also, the Bell Caps that are SKU # 5925205 mentioned further up in a post...are the SAME ones I ordered that a regular 510 drip tip will not fit in. I tried 20+ different ones, too! They're just the clear ones, but are the same caps I ordered in a 5-color pack. Do NOT get them...the opening is tapered to prevent regular 510 tip from fitting.
 
Last edited:

Two_Bears

Vaping Master
ECF Veteran
Verified Member
Jul 4, 2015
7,045
16,673
Northern Arizona
I love it
Perfect!! Thank you very much. The next FT order I make will have these items in it for sure. I love my EH Pro KFL+ but I don't use it often because it's a pain to fill! This atty sounds like a dream come true!!
 

Users who are viewing this thread