I got my order of extra glass/plastic bottles today and my missing carry cases/cables for my hana one modz I was shorted. I have some of those nautilus hollowed out cages arriving tomorrow that were recommended ITT, then I am done.... for a while. I will be ordering a load of flavorings next week, and have a few carts of mods/tanks/parts loaded up but I am trying to hold off a month or two until my credit card balances get worked down some.
Desert Vapes has those Twizers, too! I got a couple pair from them.
Also, it took me awhile to learn how to make a nice, RYO, ciggie, but I actually got pretty good at it! Had my own little Tops cheapo machine, my big bag of pipe tobacco, box of tubes, a tray I always made them on, and waalaa! No mess, pretty fast to make several packs worth, and I even learned how to make them packed like a regular smoke so they didn't fall apart, burn my clothes, etc.
Also, it took me awhile to learn how to make a nice, RYO, ciggie, but I actually got pretty good at it! Had my own little Tops cheapo machine, my big bag of pipe tobacco, box of tubes, a tray I always made them on, and waalaa! No mess, pretty fast to make several packs worth, and I even learned how to make them packed like a regular smoke so they didn't fall apart, burn my clothes, etc.
I wanna see now!!! I am waiting for my 3 to arrive, hopefully by Thursday. I got the speckled ones cause I'm weird like that.
I wanted to get the blue speckled one, but decided to go with the plain because it would be more versatile. The flavor is incredible! It's almost as good as the real Kabuki. The only quirk the clone has is that it tends to leak if I overfill it. I hope yours doesn't leak at all, but if it does, I suggest you only fill it about 3/4 full. Then you shouldn't have any problems at all.
Thanks, I will keep working it since I would have to pay shipping and a restock fee to return it.
Thanks for the tip, can't wait to get them.
For anyone still shopping, these are 8.99 at DFW
30W Aspire ESP VW MOD
Fozzy, this might be a good alternative for your housemate.
non-removable battery = thanks but no thanks
My brother used to RYO and we both did for awhile to save $'s.
Sorry for the laughter, I'm just appreciating hearing that I wasn't the only person that had a problem. 
Why don't you try another magnet on the outside? If you have any on the fridge maybe they will help to lift a little to at least get a little hold or fingernail under it enough to pull.
such a thought.
Holy crap we actually fell to page two for a minute there! Don't worry guys I got us.
Trying to figure out if my Geekvape 521 Tab bit the dust already or if I got a DOA RTA and a DOA RBA for the STM.
Also, I've heard that the tracking notice of that package getting routed to the FDA was a troll and innocently got passed along through an advocacy group. Apologies for any headaches that caused, did say it was unconfirmed but yeah I hate passing false information.
Trying to figure out if my Geekvape 521 Tab bit the dust already or if I got a DOA RTA and a DOA RBA for the STM.
Also, I've heard that the tracking notice of that package getting routed to the FDA was a troll and innocently got passed along through an advocacy group. Apologies for any headaches that caused, did say it was unconfirmed but yeah I hate passing false information.
Tried that and one of those tools that has a strong magnet on the end, tried a coin, screwdriver, acrylic fingernails. butter knife. That puppy has strong magnets, they would lift a super hero into the air. Finally occurred to me to try the jar lid thing and that did the trick. Hopefully, as Mowgli said, after a few tries it will get easier.Why don't you try another magnet on the outside? If you have any on the fridge maybe they will help to lift a little to at least get a little hold or fingernail under it enough to pull.
such a thought.
I just found out something interesting on my T18 tanks and coils and they are supposed to be 1.5 coils but when I checked resistance of each one on Provari they tested from 1.7 to 2.3! I am assuming that coils change resustance with use as the coils build up but I Was surprised at the 2.3.
If it's like mine was, the 510 was not really spring loaded. Emailed Geek Vape and they would not answer any questions I had about it. So I replaced that piece of junk with a Coil Master Tab.
Saying the acronyms fast made my head spin. 'DOA RTA DOA RBA for the STM.
We need a head spin smiley.
I have found that my 1.5Ω gs-air coils go all the way up to 4.2Ω pretty quickly once they are getting close to needing to be changed. My welded legs 1.8Ω re-built protank coils only go to about 2.8Ω before they pop or start tasting bad so get changed out. I am thinking since the gs-air coils have dual coils maybe one of them pops and that is why it goes up so far. I'm not really sure what is going on.
I am beginning the think my last package from FT was put on a slow boat instead of a plane this time Sure is good that it is just some coils and o-rings.
This is what I have been seeing since 8/5:
Product & Tracking Information
Postal Product:
Date & Time Status of Item Location
August 5, 2016 , 4:48 pm
Processed Through Facility
BEIJING EMS, CHINA
Your item has been processed through a facility in BEIJING EMS, CHINA at 4:48 pm on August 5, 2016.
Origin Post is Preparing Shipment
August 4, 2016 , 3:52 am
Processed Through Facility
BEIJING EMS, CHINA
Origin Post is Preparing Shipment
August 3, 2016 , 2:17 pm
Acceptance
CHINA
Sure is good that it is just some coils and o-rings. This is what I have been seeing since 8/5:
Product & Tracking Information
Postal Product:
- First-Class Package International Service
- Small Packets
Date & Time Status of Item Location
August 5, 2016 , 4:48 pm
Processed Through Facility
BEIJING EMS, CHINA
Your item has been processed through a facility in BEIJING EMS, CHINA at 4:48 pm on August 5, 2016.
Origin Post is Preparing Shipment
August 4, 2016 , 3:52 am
Processed Through Facility
BEIJING EMS, CHINA
Origin Post is Preparing Shipment
August 3, 2016 , 2:17 pm
Acceptance
CHINA
Similar threads
