The second link is a bell cap kit snd has a clear barrel.
The threads on the clear barrel are janky
Use a standard Steel barrel.
Mine works fantastic i prefer green or blue bell caps.
The threads on the clear barrel are janky
Use a standard Steel barrel.
Mine works fantastic i prefer green or blue bell caps.
It just gives me cravings for the real thing.
You gave me an idea, and it could take 30lbs off of me easy. I think that I can withstand the cravings...
Anyone have a recipe for Pepperoni Pizza!
Man-o-Man if anyone could come up with that, pepperoni, onions, sauce, cheese, crust... I'm all in.
Can you please, pretty please post your recipes for Hangsen tobaccos, and FA Virginia?
Be happy to do that. I'll put em in the recipe section of the diy. It'll probably be awhile getting them there, but I'll give you a holler from there when I'm done.
Cool! I've just assembled all the tools for 100% DIY (maybe need a bottle or two but that's no biggie) and RY4 is a hit in my book!
Thanks!
I think I have seen Pizza flavor somewhere, TFA??
You gave me an idea, and it could take 30lbs off of me easy. I think that I can withstand the cravings...
Anyone have a recipe for Pepperoni Pizza!
Man-o-Man if anyone could come up with that, pepperoni, onions, sauce, cheese, crust... I'm all in.
Here is the bell caps i usually get
$5.85 Free Shipping Replacement Acrylic Bell Cap for Kayfun Mini RTA Atomizer (5-Pack) (Kayfun Mini Bell Cap, Acrylic, Blue, 5-Pack) at m.FastTech.com.
Use your own base, barrel, and tip.
That's what I had for lunch with some nicotine eggplant LOL!All this talk abt Italian food, and I have a mad crush on it. Before this goes any further I'm going to go in to the kitchen and make some spaghetti!
Issues using prebuilts on my STM RBA
Last night, I finally got a prebuilt coil wicked and working on my STM and I am loving the flavor!! I've tried to do this a few times over the last few weeks, but none of them worked well enough to actually use before.
Emboldened by this success, I used another prebuilt, wicked coil on another STM this afternoon, but when I tried to screw the tank onto the RBA & STM base, it wouldn't screw in. I think the hole in the RBA is too small for the chimney of the tank to fit into, but I'm not sure about anything.
Has anyone ever had this problem before? Are the different versions of STMs interchangeable with one another? All of my STMs are authentic with the exception of one clone I got from Righteous Enterprises on Ebay, but it's such a great clone, I can't tell if the STM I'm having trouble with is an authentic STM or the clone. Does anyone have any suggestions for me?
Thank you all in advance for your advice and tips!
J.W.
Last night, I finally got a prebuilt coil wicked and working on my STM and I am loving the flavor!! I've tried to do this a few times over the last few weeks, but none of them worked well enough to actually use before.
Emboldened by this success, I used another prebuilt, wicked coil on another STM this afternoon, but when I tried to screw the tank onto the RBA & STM base, it wouldn't screw in. I think the hole in the RBA is too small for the chimney of the tank to fit into, but I'm not sure about anything.
Has anyone ever had this problem before? Are the different versions of STMs interchangeable with one another? All of my STMs are authentic with the exception of one clone I got from Righteous Enterprises on Ebay, but it's such a great clone, I can't tell if the STM I'm having trouble with is an authentic STM or the clone. Does anyone have any suggestions for me?
Thank you all in advance for your advice and tips!
J.W.
Hey! Wheres my slice?
More than happy to make some extra spaghetti for you but by the time you get here...I'll probably eat that too!
haha,i believe it.Whatever sort facility the overseas packages go to after leaving customs in Chicago is very hit or miss.I've had some leave customs,get scanned right in at the sort facilty,then right back out,and be at my post office the next day.I have had others sit in that sort facility for over a week before leaving,and have had others get sent all across the country before getting to me.From Chicago to Ohio is a pretty straight shot,but i had 1 go from Chicago to Missouri before it came to me,and another that first went to Wisconsin,then Missouri,then ended up in New Jersey before finally getting sent to my post office.
Although,i gotta say,it isn't just Chicago that has issues.I had a package a while back that was sent from 1 city away from me,i could of drove and got it in less than a half hour.It went from his post office to my post office,great i'll have it tomorow,wrong haha,it left my post office which is 5 minutes away from my house,and was sent to a sort facility in Kentucky,then sent right back to my post office.Another one stayed in state,but my po sent it to another po 100 miles away for them to send it back haha.
I got some clone RBAs, that had a tighter fit on the authentic chimney.
I was able to force them on to work tho.
All authentic STM parts should be interchangeable.
Another problem with the clone RBAs is the screws rusted.
I had a Reosmod tour the US.
Leaving Maine and going to two different post offices in San Diego, then on to two different post offices in NC, before it finally landed at the sorting facility in Mo.
That's the last stop before it's journey to our tiny IL post office, about 55 miles away.
I like to think I got my full money's worth out of that shipping charge. Lol's.
Leaving Maine and going to two different post offices in San Diego, then on to two different post offices in NC, before it finally landed at the sorting facility in Mo.
That's the last stop before it's journey to our tiny IL post office, about 55 miles away.
I like to think I got my full money's worth out of that shipping charge. Lol's.
How much wick do you have in there? If you completely covered the coil (with a lot of wick), that may be what's causing the problem. The chimney has to have a little room to go down in there.
You gave me an idea, and it could take 30lbs off of me easy. I think that I can withstand the cravings...
Anyone have a recipe for Pepperoni Pizza!
Man-o-Man if anyone could come up with that, pepperoni, onions, sauce, cheese, crust... I'm all in.
Add mushrooms and that would be the perfect pizza flavor vape.
You gave me an idea, and it could take 30lbs off of me easy. I think that I can withstand the cravings...
Anyone have a recipe for Pepperoni Pizza!
Man-o-Man if anyone could come up with that, pepperoni, onions, sauce, cheese, crust... I'm all in.
Pizza Ria - eLiquid Flavor
Yeah the VG based flavors need some heat to get them moving in the mix.
Without the heat they seem weak and take forever to steep.
Similar threads
