Are you done stocking up?

[bnrkwest]

We should all start a list of tried and true kayfun parts that actually are worth stocking up on. Most of the parts I have bought have been great, but there are lots of duds or parts that really don't fit certain KFs.

I know there have been a few, but nothing like "this tank sucks as it isn't threaded", "need to order a smaller chimney too", etc.

Good idea! Like I didn't know the rounded bell caps needed the chimney with the short upper top piece. I am using the FT KF base successfully with the Ehpro clear tank and top piece. And I like the full clear tank, great for seeing juice and full tank capacity plus lighter

 

[bnrkwest]

I think it is the cheapest tank to buy pieces parts to set up as Two Bears has said, many options in tank size too.

 

[BreSha6869]

Good idea! Like I didn't know the rounded bell caps needed the chimney with the short upper top piece. I am using the FT KF base successfully with the Ehpro clear tank and top piece. And I like the full clear tank, great for seeing juice and full tank capacity plus lighter

I just ordered these.

$5.29 Replacement PC Tank for Kayfun V4 & Kayfun Lite Five Pawns (10-Pack) at FastTech - Worldwide Free Shipping

I THiNK they are the right full size tanks but won't know for a few weeks.

 

[3mg Meniere]

I just ordered these.

$5.29 Replacement PC Tank for Kayfun V4 & Kayfun Lite Five Pawns (10-Pack) at FastTech - Worldwide Free Shipping

I THiNK they are the right full size tanks but won't know for a few weeks.

No. That is the short one. The tall ones are 34.5 mm. $0.88 Replacement Polycarbonate Tank for Kayfun 3.1 / Kayfun Lite - purple at FastTech - Worldwide Free Shipping

 

[oplholik]

Yep, parts for the KFL as well as the STM's are plentiful.

 

[LoriP1702]

Well, FT was out of the Kayfil tool for the KFL, and I wasn't sure if the 5Pawns tool would work.
I ordered a KFL fill tool, and KM3 steel tanks, and KF5 o-rings set from Creme de Vape.
Shipping and VAT were NOT as bad as I thought it would be. $10.95, and that included insurance.
VAT was a couple dollars.
The fill tool was on sale, and only $2.00 more than FT.
So, I'm a happy camper.
Glad to still find what I needed.

 

[Two_Bears]

I was amazed how much Kayfun stuff was out there for parts, I have a box filled with just parts, bell caps, extra bases etc.

Here is why i live Kayfuns so much.

Good flavor

Easy to build

Use a flat top bell cap holds 2.5 ml

Use the 34 mm bell cap to hold 3 ml

use the M Tank to hold 5 ml

Extend tge chimney and use an M tank and 34 mm bell cap and holds 9 ml

Don't forget they're cheap

Spare parts for sale

Spare bases, barrels, chimneys, screws, O rings, insulators, 510 pins, etc.

Don't forget. If you like MTL use the lite plus base

If you like direct lung use tge Monster Mini V3 base.

If i were to choose my favorite arty to use forever: it would be the Silverplay Nano;

Unfortunately spare bases, chimneys, and bell caps, SCREWS, 510 PINS SIMPLY ARE NOT AVAILABLE.

So i use Kayfuns. When a part wears out or breaks replace a cheap part and KEEP ON VAPING.

 

[Two_Bears]

Good idea! Like I didn't know the rounded bell caps needed the chimney with the short upper top piece. I am using the FT KF base successfully with the Ehpro clear tank and top piece. And I like the full clear tank, great for seeing juice and full tank capacity plus lighter

Yep sure does.

The flat top bell cap 25 mm tall only needs a barrel.

The 34 mm rounded bell cap needs a barrel and Nano chimney

The M tank needs the barrel, standard chimney, and Kayfun top cap.

 

[Two_Bears]

Well, FT was out of the Kayfil tool for the KFL, and I wasn't sure if the 5Pawns tool would work.
I ordered a KFL fill tool, and KM3 steel tanks, and KF5 o-rings set from Creme de Vape.
Shipping and VAT were NOT as bad as I thought it would be. $10.95, and that included insurance.
VAT was a couple dollars.
The fill tool was on sale, and only $2.00 more than FT.
So, I'm a happy camper.
Glad to still find what I needed.

The 5 pawns kay fill would have worked perfectly.

All Kayfun chimneys are the same diameter, and all Kayfuns have or should have a rubber O Ring around the chimney.

The reason why i use the 25 mm bell cap is because the barrel screws directly into the bell cap. If you put the barrel tightly into the bell cap you can unscrew the base and rebuild or rewick without dumping the juice.

Would i like it to hold .5 ml more liquid? SURE! But the ability to rebuild or rewick without dumping Juice i put up with it just because the short bell cap on my mod is so darn pocket friendly its hard to complain against.

 

[Two_Bears]

I think it is the cheapest tank to buy pieces parts to set up as Two Bears has said, many options in tank size too.

Agreed. I was stunned when the ECF MEMBER had a bell cap on top of an M tank and hus Kayfun held 9 mls Juice. Don't know how he got the Two tanks together after extending the chimney. It worked for him but NOT POCKET FRIENDLY.

 

[LoriP1702]

The 5 pawns kay fill would have worked perfectly.

All Kayfun chimneys are the same diameter, and all Kayfuns have or should have a rubber O Ring around the chimney.

The reason why i use the 25 mm bell cap is because the barrel screws directly into the bell cap. If you put the barrel tightly into the bell cap you can unscrew the base and rebuild or rewick without dumping the juice.

Would i like it to hold .5 ml more liquid? SURE! But the ability to rebuild or rewick without dumping Juice i put up with it just because the short bell cap on my mod is so darn pocket friendly its hard to complain against.

Ah well...maybe I'll have it quicker.

 

[bnrkwest]

I just ordered these.

$5.29 Replacement PC Tank for Kayfun V4 & Kayfun Lite Five Pawns (10-Pack) at FastTech - Worldwide Free Shipping

I THiNK they are the right full size tanks but won't know for a few weeks.

They look right and I think I'll get some too

 

[Two_Bears]

Ah well...maybe I'll have it quicker.

I bet the Kayfill would work with the Orchid v3 under a 34 mm Kayfun bell cap.

Will have to try that one of these days.

 

[Two_Bears]

They look right and I think I'll get some too

Those are the M tanks.

Yoy will need barrel, standard chimney, and Kayfun top cap

 

[bnrkwest]

Been working on RF Bread Pudding which is ok but needed a little extra for me, so added a little TPA Raisin & Jamacian Rum and a pinch of OSDIYS Lucky Shot. It gives it a sweet raisin lite note and bottom note of rum, bread pudding caramelly graham cracker bottom note. It needs to steep a bit but I like it
Edit: Reminds me of a bread pudding I used to make that had a rum raisin caramel sauce that went on top. Don't make it anymore because hubby & I were getting too fat from it! LOL

 

[Two_Bears]

Been working on RF Bread Pudding which is ok but needed a little extra for me, so added a little TPA Raisin & Jamacian Rum and a pinch of OSDIYS Lucky Shot. It gives it a sweet raisin lite note and bottom note of rum, bread pudding caramelly graham cracker bottom note. It needs to steep a bit but I like it

Good for you.

Learning to rebuild and DIY Ejuice.

 

[Bea-FL]

I do need to place a battery order when RTD hopefully has their annual Black Friday sale, but that's not stocking up, just a regular maintenance purchase I'll be making every year or other year.

I need topick up a couple more batteries from them. When do they typically have their sale?

 

[Dubminer]

Been working on RF Bread Pudding which is ok but needed a little extra for me, so added a little TPA Raisin & Jamacian Rum and a pinch of OSDIYS Lucky Shot. It gives it a sweet raisin lite note and bottom note of rum, bread pudding caramelly graham cracker bottom note. It needs to steep a bit but I like it
Edit: Reminds me of a bread pudding I used to make that had a rum raisin caramel sauce that went on top. Don't make it anymore because hubby & I were getting too fat from it! LOL

I just finished making a batch of RF Bread pudding and a batch of RF Apple pie.My first time trying Real Flavors.Looking forward to trying them out.

 

[BreSha6869]

No. That is the short one. The tall ones are 34.5 mm. $0.88 Replacement Polycarbonate Tank for Kayfun 3.1 / Kayfun Lite - purple at FastTech - Worldwide Free Shipping

Thank you! I will cancel and reorder now. MUCH appreciated!

 

[Bea-FL]

I think it is the cheapest tank to buy pieces parts to set up as Two Bears has said, many options in tank size too.

I was just on FT site looking for some spare parts for my KF and they have lots of those but it seems like most entire KF tanks are either discontinued or out of stock. Why do you suppose that is?