Are you done stocking up?

[Sugar_and_Spice]

I need to hold off on buying one for maybe a month. I do plan on getting another one. The vape is smooth like my provari and I really like how slim it is. Only thing I’m not crazy about is no power off option, just locks.

Maybe at night just take the battery out?

Anyone think of a reason not to?

 

[leftyandsparky]

Maybe at night just take the battery out?

Anyone think of a reason not to?

I like having them off in my purse, but it does lock.

 

[bnrkwest]

For all the Provari fans, I found this history and wanted to share
The History of ProVape - Guide To Vaping

 

[JCinFLA]

In case anyone's interested:

Found that the US website below has some very good "Crazy Sale" deals on some of the older gear from Innokin, SmokTech, Kanger, Aspire, Youde, Wotofo, Tobeco, GeekVape, Uwell, etc. (mods, tanks, clearos, cartos & tanks, RBA, wire, coils, etc.). Most of it is extremely reduced in price and some is downright "dirt cheap"!

Here's a link to the Hardware Clearance pages, already sorted Lowest Price to highest:

Hardware | ECigarettes | Parts | Accessories - Hardware Deals and Specials - Hardware CLEARANCE - Page 1 - ECBlend

Other categories of sale stuff can also be found on their website, too.

For example, for Provari owners -

Efest 18500 Button Top Batteries for $2.50 each:

Battery - Efest - 3.7v Rechargeable IMR-LiMn Batteries

Efest 18350 Flat Top Batteries (can use an adapter on them) for just $.95 each:

Battery - Efest - 18350 - Purple - 10.5 Amp High Drain - Flat Top

They have a gracious plenty of both sizes, according to Matt, their CS guy that I asked to please check on the quantity available. (I didn't want to even post about them if they only had a small quantity that would be gone quickly.) Also, if you'd like them tested before shipment...Matt said to just request that in the Order Notes section during Checkout.

 

[leftyandsparky]

In case anyone's interested:

Found that the US website below has some very good "Crazy Sale" deals on some of the older gear from Innokin, SmokTech, Kanger, Aspire, Youde, Wotofo, Tobeco, GeekVape, Uwell, etc. (mods, tanks, clearos, cartos & tanks, RBA, wire, coils, etc.). Most of it is extremely reduced in price and some is downright "dirt cheap"!

Here's a link to the Hardware Clearance pages, already sorted Lowest Price to highest:

Hardware | ECigarettes | Parts | Accessories - Hardware Deals and Specials - Hardware CLEARANCE - Page 1 - ECBlend

Other categories of sale stuff can also be found on their website, too.

For example, for Provari owners -

Efest 18500 Button Top Batteries for $2.50 each:

Battery - Efest - 3.7v Rechargeable IMR-LiMn Batteries

Efest 18350 Flat Top Batteries (can use an adapter on them) for just $.95 each:

Battery - Efest - 18350 - Purple - 10.5 Amp High Drain - Flat Top

They have a gracious plenty of both sizes, according to Matt, their CS guy that I asked to please check on the quantity available. (I didn't want to even post about them if they only had a small quantity that would be gone quickly.) Also, if you'd like them tested before shipment...Matt said to just request that in the Order Notes section during Checkout.

I wanted to get the 50w box bod for $7 but not in stock

 

[bnrkwest]

Wow good sale!

 

[bnrkwest]

Trying out the small size Berserker, this one authentic. I finally got the flavor hit and it is very good. Mixed up some butterscotch cake, very tasty. But I am having flooding issues, bad gurgling and leaking. Did I hear some bottom fill to fix that ? It is a tight vape even in biggest air hole.

 

[NolaMel]

Wow good sale!

I used them in the early days of vaping for juice, as they were one of the few places you could get US made. (They opened not long after Johnson Creek, IIRC.) Still on their mailing list. It’s worth it for their crazy clearance sales.

 

[MikeE3]

For all the Provari fans, I found this history and wanted to share
The History of ProVape - Guide To Vaping

I wonder if that's the same "Blake" from Provape support. A couple of my Provape support tickets where handled by someone with that name.

 

[Walee]

I stopped stocking up about 6/8 months ago thinking enough was enough. Then manufacturers and sellers started sending me stuff to review. I'm running out of room.

 

[cats5365]

Trying out the small size Berserker, this one authentic. I finally got the flavor hit and it is very good. Mixed up some butterscotch cake, very tasty. But I am having flooding issues, bad gurgling and leaking. Did I hear some bottom fill to fix that ? It is a tight vape even in biggest air hole.

I had trouble getting the top cap to seal properly when I tried doing the top fill. Bottom fill is much better 99% of the time for me. If I get leaking now, it is usually because my wick shifted during a fill and lifted out of the juice pocket, or I didn't get enough rayon to begin with on a new wick.

 

[bnrkwest]

I wonder if that's the same "Blake" from Provape support. A couple of my Provape support tickets where handled by someone with that name.

Yes me too, I wonder if that is the same Blake.

 

[JCinFLA]

Trying out the small size Berserker, this one authentic. I finally got the flavor hit and it is very good. Mixed up some butterscotch cake, very tasty.

But I am having flooding issues, bad gurgling and leaking. Did I hear some bottom fill to fix that ? It is a tight vape even in biggest air hole.

Others also had trouble with those problems when topfilling. There's a little trick someone came up with on one of the Berserker threads that helped somewhat. But there's still some gurgling and leaking sometimes.

Most of us just bottomfill all the time instead and totally eliminate the gurgling, leaking, and flooding. You have to take a part completely off anyway...filling either way. Another thing I like about bottomfilling...is that I can see how my wick and coil are doing each time I refill the tank.

 

[bnrkwest]

I tried bottom filling and no problem with leaking or gurgling. Now if they would just put a screw in there like Kayfuns we'd be all set LOL!

 

[bnrkwest]

I also added a taller drip trip, much better

 

[stols001]

I got my first paycheck and unfortunately most of it will go to bills and I don't even have TIME to order stuff. But, I'm really (other than a liter of nic soon and snus) kind of stocked up a lot. I just bought more batteries.

Don't get me wrong, of course I want to buy stuff but I just really shouldn't (yet).

Anna

 

[NolaMel]

I ended up replacing a bulk of my batteries, as I have a number that are getting elderly. And, about 20 diy flavors to treat myself . I’m waiting for a nic sale. I bumped back up to 6 from 3 because I found myself chain vaping, which in turn cut my supply of nic lifespan in half. I’m hoping if there is a flavor ban, they’ll continue to offer unflavored juice.

 

[leftyandsparky]

I ended up replacing a bulk of my batteries, as I have a number that are getting elderly. And, about 20 diy flavors to treat myself . I’m waiting for a nic sale. I bumped back up to 6 from 3 because I found myself chain vaping, which in turn cut my supply of nic lifespan in half. I’m hoping if there is a flavor ban, they’ll continue to offer unflavored juice.

How often are we supposed to replace our batteries? I’ve been replacing every year.

 

[NolaMel]

How often are we supposed to replace our batteries? I’ve been replacing every year.

Someone with more knowledge than me will answer, I’m sure. I bet I have some that are over a year old, but I recycle them when they start giving me less run time. You make a good point about battery safety. I should be more vigilant

 

[Sugar_and_Spice]

Someone with more knowledge than me will answer, I’m sure. I bet I have some that are over a year old, but I recycle them when they start giving me less run time. You make a good point about battery safety. I should be more vigilant

I always put a date on the battery when I put it into use. I have some more than a year old, but I do keep notice if they start to under perform. When there runtime starts to go and you are charging it more often than you used to, it is time to replace. I have many mods in rotation so that could be why my are lasting longer as they don't get worked as hard as they would if I used only say 3 -5 mods.
As always ymmv....