Take your gold out of your safe deposit box and put your mods in. They will be worth more. LOLOK, something else to shop for. Fire and water proof box!I do have a safe deposit box, but not to the point of putting mods and attys in there (yet).
The Serpent Elevate keeps popping up in this thread. My wife and I are both MTL vapers and like our coils between 1.2-1.6Ωs. And we don't prefer an airy vape. Is the Elevate suitable for this type of vaping style?
One of my new favorites is the Cthulhu Hastur w/ a 1.6Ω coil and I can dial down the air flow for a loose MTL or a tighter draw. Anyone have both the Hastur and Elevate that could give me their comparison of the two.
I like the Silverplay too ... but its minor drawback for me is the juice capacity.
Yep, I'm looking for perhaps one more tank to stock up on.
I bought one a few years ago for all my important paperwork and gave my parents a key. Just in case anything happened to me or us, everything they would need to know about us and our home is there. Mine does get moist though even with several desiccant packets and instructions said to air it out weekly which I never do. Fine for paper, not good for mods. Shrink wrap possibly. I just had another thought to take a couple of vape setups to work just in case.OK, something else to shop for. Fire and water proof box!
I am pretty sure that @*RJ* had the black one and it autofired.
I have both the metallic resin (x2) and the black. I got some loctite super glue to glue the pin and then some loctite silicone that I am going to use to pack the electronics box with somehow just in case. lol
EDIT: Was catching up, @*RJ* already pointed out that she had the black one.
@*RJ* was looking for an air compressor, someone said she should get one that also has a jump starter... and then many of the suggestions somehow morphed into jump starters only. lol
ok somewhere along the line I picked up a NRG Tank (has not yet arrived). COuld someone please verify to me that I am reading things right and it will take the SMOK TFV8 baby coils? IF so I am stocked if not well going to be stocking a few coils for THIS tank.
@BigPappa - Was it the 22mm or 24mm Wotofo Elder Dragon that you liked and wanted? IIRC you ordered at least 1, but I found the 22mm ones in many colors for $10 each at KangerWholesale.
Wotofo Elder Dragon 22mm RDA
Wotofo Elder Dragon 22mm RDA
Basically for me it is coils for the Boost and some more RBA's for the Kanger top tank. Who knew I would like the top tank LOL But it holds lots of juice and vapes great 
Today's roasting will be a Colombian bean - fruit loops, milk chocolate and orange blossom notes sound nice [emoji3]
I'm pretty set for stocking. Contemplating two more liters of nic and a small freezer while prices are good. Otherwise I'll scoop up a handful of packs of gt ccell 0.5 ohm, to go along with my bulk stock of the gt ccell 2, if I see a really good sale. These items can easily wait until early next year.
The Vaporesso NRG rounded out my set of baby beast compatible tanks. I'm up around a 2 year supply of heads, where I wanted to be in case something happens where I can't coil/wick.
RTA I have plenty of. If I really like the Brunhilde MTL I might get a second, but no biggie - squonking really is my normal vaping mode.
RDA are set, plenty.
Mods are set, plenty, including multiple mechs.
Flavors are a consumable, not worried about them disappearing.
Wick I have a 3 lb box of cellucotton rayon.
Kanthal I have a decent supply of, not in a great rush to order more.
Squonk 510 rebuild connectors - just placed an order for 6 sets of mm 510 and ancillary parts. (25% off sale at broscience [emoji106])
I'm pretty set for stocking. Contemplating two more liters of nic and a small freezer while prices are good. Otherwise I'll scoop up a handful of packs of gt ccell 0.5 ohm, to go along with my bulk stock of the gt ccell 2, if I see a really good sale. These items can easily wait until early next year.
The Vaporesso NRG rounded out my set of baby beast compatible tanks. I'm up around a 2 year supply of heads, where I wanted to be in case something happens where I can't coil/wick.
RTA I have plenty of. If I really like the Brunhilde MTL I might get a second, but no biggie - squonking really is my normal vaping mode.
RDA are set, plenty.
Mods are set, plenty, including multiple mechs.
Flavors are a consumable, not worried about them disappearing.
Wick I have a 3 lb box of cellucotton rayon.
Kanthal I have a decent supply of, not in a great rush to order more.
Squonk 510 rebuild connectors - just placed an order for 6 sets of mm 510 and ancillary parts. (25% off sale at broscience [emoji106])
I had waited until Black Friday to get them and I picked up 2 of them for 9.98 each. But thank you so much for remembering me!! You rock!
Basically for me it is coils for the Boost and some more RBA's for the Kanger top tank. Who knew I would like the top tank LOL But it holds lots of juice and vapes great
Subtanks and toptanks were the tanks I stocked for the 2016 vapocalypse. They are workhorses. Last I saw FT still had the authentic RBA units for them.
Yes, it is baby beast/Cerberus/hellbeast/... compatible. I confirmed it when I got mine in [emoji3] (installed several other heads).
A nice tank, 510 drip tip.
No, I have not done mine yet. I picked up a set of Torx thingies in all sizes, so I will let you know when I do mine. I need to find my squonkers in a sea of boxes to do it. I plan on sorting all of my hardware this week into 4 boxes (1 for sale, 1 for my house, and 1 each for my brother-in-law's and my daughter's house to store there in case of fire or hurricane). Once I get things sorted (and know where they are) I plan on fixing those squonkers and will know what size. I bought this set because it went all the way down to a T2 (most sets only went down to a T4): https://www.amazon.com/gp/product/B07TR4MZVR/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 Will I need something smaller than a T4? Probably not, but I figured better to be safe than sorry. I also got these hex keys because they went down so small: https://www.amazon.com/gp/product/B00I5TH074/ref=ppx_yo_dt_b_asin_title_o08_s01?ie=UTF8&psc=1 And I got this ratchet wrench screwdriver for the Torx, but it feels cheap: https://www.amazon.com/gp/product/B07T235RLK/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1 I wish I would have spent just a few bucks more on that.
EDIT: NM, @Pigs answered your question.
For periodic use the Pittsburgh set from HF is handy.
For daily use, the 2 smaller drivers in the Bondhus 10687 set from Amazon are what I use for building rda/rta.
For daily use, the 2 smaller drivers in the Bondhus 10687 set from Amazon are what I use for building rda/rta.
I ended up going with this set on sale for $12.
https://www.amazon.com/gp/product/B01E16J6RQ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B01E16J6RQ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Similar threads
