E2 Cartomizer Technical Discussion

[br5495]

Gotcha...

Tube filament wire from the 20's? You are making me feel young. And that is hard to do early in the mourning before I have had 3 cups of joe.

If you want to see something really old, that will be me in some photos that were recently taken by one of my radio collector friends. I built a lot of this stuff from scratch, using authentic parts from the time period. However, some are factory built radios that have been restored.
br549 pictures by billynaty - Photobucket

 

[naviathan]

If you want to see something really old, that will be me in some photos that were recently taken by one of my radio collector friends. I built a lot of this stuff from scratch, using authentic parts from the time period. However, some are factory built radios that have been restored.
br549 pictures by billynaty - Photobucket

Nice equipment! I love antique radios and the like.

 

[Macromny]

I am having to go through a paypal dispute from ordering these from China (ecigfair).

Buyer beware!

No more orders from China, they do not fix their mistakes.

 

[badkolo]

If you want to see something really old, that will be me in some photos that were recently taken by one of my radio collector friends. I built a lot of this stuff from scratch, using authentic parts from the time period. However, some are factory built radios that have been restored.
br549 pictures by billynaty - Photobucket

BR, i got nothing but love for you man, you rock dude.

 

[naviathan]

What mistakes did they make? We're all aware of some of the issues with ordering through the various direct from China websites.

 

[br5495]

BR, i got nothing but love for you man, you rock dude.

........ and I thought you was gonna to poke fun at the old fart in some of the photos. Maybe you're not so bad after all, even though I keep calling you that.

 

[zoiDman]

BR, i got nothing but love for you man, you rock dude.

I agree, Br is the best.

Hey Bad. Do you recall what ohms the 510 XL's R3V2 you sent me were?

 

[badkolo]

I agree, Br is the best.

Hey Bad. Do you recall what ohms the 510 XL's R3V2 you sent me were?

it depends but some where 2.5, some 2.6 and one 2.4, if i sent you a regualr size e2 as well then that is at 2.6 but the xl 510 should be 2.4. 2.5 2.6


the ones that where opened where tested 2.5 to 2.6, i opened those to make sure connectors where good so then i left the rest sealed for everyone

zoid one of the opened 510 xl r3 and a half was already dry burned for you

 

[v1John]

It seems like 90% of things are ordered from China

 

[naviathan]

It seems like 90% of things are ordered from China

At some point, sure, but at least ordering from a US supplier lets them handle the error shipments and the consumer gets better service.

 

[zoiDman]

it depends but some where 2.5, some 2.6 and one 2.4, if i sent you a regualr size e2 as well then that is at 2.6 but the xl 510 should be 2.4. 2.5 2.6


the ones that where opened where tested 2.5 to 2.6, i opened those to make sure connectors where good so then i left the rest sealed for everyone

zoid one of the opened 510 xl r3 and a half was already dry burned for you

The reason I ask is that the 1st 510 XL R3V2 seems to have a Very mellow, cool hit. Very nice. I thought that maybe it was a 3 ohm version?

The earlier carto varied wildly hit wise which I chocked up to varience in ohms.

 

[v1John]

e-liquid has always handled shipping errors, I have no idea what Macromny is talking about .




[omitted]

 

[badkolo]

is ecigfair part of royal smokers and microcig, if so i would email microcig directly and explain the situation, it was nt your fault if they shipped it incorrectly.

So far i havent had any issues with e-liquid and since i know microcig and e-liquid ar ethe same I feel ok ordering form them, the service has been pretty good as well so far, other then waiting long for shipping .

 

[v1John]

it's thought that royal smokers owns microcig
it's thought that royal smokers allows people to buy thru the ecigfair and e-eliquid portals

I feel ok ordering form them, the service has been pretty good as well so far, other then waiting long for shipping .

it's not the shipping that takes long tho, i have had stuff leave china on a sat. and get to me a few days later on a wed.
what takes the longest is changing the technolological new versions and the whole production floor
the rest of the waiting is just standard procedure, each item has it's shipping time 3-7 days, etc. one time for me they were out of stock on a certain flavor and by email i had a choice of waiting for the stock or changing

but i feel ok ordering also. it's like 90% of things are ordered from china either way, i guess it's just a matter if someone wants to hire someone to order for them or something.
a lot of people do that, it's a rapidly growing business, people are hiring people to order for them

 

[naviathan]

Royal Smokers was started by Martinez in 2006. He branched off later and started Microcig. eliquid.cn and ecigfair are both distributing companies he setup to distribute the products for Microcig. There's another website out there that does their whole sale distributing, but I can't find the link right now. So from what I gather they're all pretty much one and the same in some way.

 

[badkolo]

Royal Smokers was started by Martinez in 2006. He branched off later and started Microcig. eliquid.cn and ecigfair are both distributing companies he setup to distribute the products for Microcig. There's another website out there that does their whole sale distributing, but I can't find the link right now. So from what I gather they're all pretty much one and the same in some way.

Centraltrade Limited

 

[mister kil]

Centraltrade Limited

Thanks for the link the prices are a bit better than E-liquid and much better than Ecigfair here it seems.

 

[badkolo]

yes but its wholesalers only and in bulk and no paypal or credit card system .

 

[mister kil]

I just noticed that, ugggg. I can't wait to get some carto's for my 808 vgo's I used up all the ce1's that came with them, they did not last long at all.

 

[badkolo]

they should be there tomorow