E2 Cartomizer Technical Discussion

[Aras]

I think e-liquid.cn will make good on unusable and mis-shipped cartos...

From a PR stand point. Do you want the people who helped get this carto where it is today, with their hard earned money and clever ideas, posting how e-liquid.cn screwed them in a thread with more than 3,000 posts and 65,000 views?

LOL, e-liquid.cn will not "make good" on any orders with bad claims, that's hilarious if you think they will. Aside from all that, I have received some more of the r3 ce2's for 510 recently from a US supplier for about double the cost. Still have primer but they work great (not xl) and I haven't had to deal with e-liquid.cn Worst service ever.

So from what I gather from this thread lately...

They are putting polyfill in to try to mimic PTB???

Please tell me I'm wrong.

 

[badkolo]

the filler is there if you want it, someone suggested it to them so i guess they are adding it, it can be removed or it can be used to mimic the ptb., they where just going to add them into the box for people to use on thier own if they want but they said it worked well so they left it in and people can remove it themselves.

Other then that I dont know much other then the info i have given. im waiting like everyone else to try these out.

 

[mister kil]

I was wondering why it came with a piece of cloth

 

[Turbo]

I was wondering why it came with a piece of cloth

Is yours the same type of material as those w/ the 'frakenstein r4's or is it different?

 

[naviathan]

I thought the point here was "NO COTTON/FILLER INSIDE"? This material looks like filler to me.

 

[badkolo]

I thought the point here was "NO COTTON/FILLER INSIDE"? This material looks like filler to me.

dont know, wasnt my idea, the plus side is that its removeable. im gonna try it with and without.

 

[naviathan]

Do we have any of these yet? I'm curious about what the material is and what it takes to burn it.

 

[BanjoMan]

lol, good luck with that. I'll be surprised if they fire the owners, board of directors, the upper management and totally change the way the entire company (and "subidiaries") have done business forever. just sayin'

wait, by "large order" did you mean like up in the $10K - $20K range?

The idea is to let them know that a large number of people on this board (the largest e-cig forum in the world) are disappointed in their customer service and quality control. At the very least it might encourage them to eat a couple of bucks and replace a few of the recent shipments that have been screwed up. It can't hurt to try.

Besides, what's the alternative? Dazzle them with sarcastic wit?

 

[mister kil]

Is yours the same type of material as those w/ the 'frakenstein r4's or is it different?

It is about an inch long by an 8th inch wide with some sort of lattice weave

 

[zoiDman]

LOL, e-liquid.cn will not "make good" on any orders with bad claims, that's hilarious if you think they will.
...

I am trying to give e-Liquid.cn the option to make good on their warrantee in that I know they are reading this thread.

I don’t want to start a new thread for people to post their problems regarding e-Liquid.cn Customer Service if I don’t have to. Because if I do, there is going to be a "Boat Load" of people posting to it.

I would much rather have e-Liquid do what is right and replace the unusable cartos a bought from them without a big hassle.

I thought the point here was "NO COTTON/FILLER INSIDE"? This material looks like filler to me.

So No Filler doesn’t apply to PTB? Because that is what we are doing with the PTB mod isn't it? Adding a filler.

 

[Turbo]

It is about an inch long by an 8th inch wide with some sort of lattice weave

Hmm..sounds different. Can you post a photo?

 

[mister kil]

once I get my scanner working again

 

[WiηgC¤mmαηdεя]

So No Filler doesn’t apply to PTB? Because that is what we are doing with the PTB mod isn't it? Adding a filler.

Well, I think the PTB is more like a wicking enhancer than a filler, and since adding the material(filler) should have the same effect its good unless it changes the taste properties of the liquid.
They should include instructions on the removal of the material so that someone not familiar with our discussions is aware of its presence and that it can be removed to become a "NO COTTON/FILLER INSIDE" C-E2, or stick with just adding it to the packages and the customer can decide whether to add it or not.

All the best,
Wing.

 

[Aras]

The idea is to let them know that a large number of people on this board (the largest e-cig forum in the world) are disappointed in their customer service and quality control. At the very least it might encourage them to eat a couple of bucks and replace a few of the recent shipments that have been screwed up. It can't hurt to try.

Besides, what's the alternative? Dazzle them with sarcastic wit?

They have already been dazzled by me... sigh. Where are the knockoffs? That's what I want to know. I actually don't want to buy their product at all and wouldn't if someone else made something similar. Again, sigh. To Zoid, I'm sorry man, these guys will not do what's right. Don't get your hopes up. They are scumbags.

 

[badkolo]

This is what i would like to know, does filler kill the taste of juice or does the juice get killed in old cartos with filler becuase the coil is touching the filler.

 

[naviathan]

They have already been dazzled by me... sigh. Where are the knockoffs? That's what I want to know. I actually don't want to buy their product at all and wouldn't if someone else made something similar. Again, sigh. To Zoid, I'm sorry man, these guys will not do what's right. Don't get your hopes up. They are scumbags.

Believe it or not, the have a patent pending and seem to have already knocked out a Kanger knock off attempt.

 

[naviathan]

This is what i would like to know, does filler kill the taste of juice or does the juice get killed in old cartos with filler becuase the coil is touching the filler.

I don't care either way. My interest in these was the lack of any filler material. If they can't provide I'll go back to atty/cart combos with blue foam or ZFM.

 

[badkolo]

I don't care either way. My interest in these was the lack of any filler material. If they can't provide I'll go back to atty/cart combos with blue foam or ZFM.

i would suggest to let him know that. cause they using that filler, i suggested to just add them to the package and let people decide if they want ot use it.
that way if someone feels its not wicking enough they can cut off a peace and place it behind the slits on thier own.

 

[naviathan]

i would suggest to let him know that. cause they using that filler, i suggested to just add them to the package and let people decide if they want ot use it.
that way if someone feels its not wicking enough they can cut off a peace and place it behind the slits on thier own.

Will do....

 

[br5495]

Will do....

The material may be a good thing if it works right. As long as it is outside the cup, it will not burn. Also, it can be used without a filler ring. That is, if it works like one of my mods. I can turn mine upside down and it does not leak. It fills best with a syringe though. I can drip down the side of the tube, but it does not soak in fast enough to keep the juice out of the cup.