E2 Cartomizer Technical Discussion
- Thread starter zoiDman
- Start date
- th_trl_thread_readers 0
- Status
If you mean "we" == US shipping address then I would expect you to get the R4s.
I asked eliquids about this after placing the order and they said that my order is already R4
Hopefully I wont have to wait 3 weeks again for it to arrive.
There is not one thing in this post that makes a lick of sense.and about the voltage: I know the post and/or thread was about the battery voltage, but I narrowed down the critical element to only the voltage that I need at the load of essence, under load, and nothing but the mere and relevant load, which is at the air stem. So if I could get 2 volts by whatever technological means applied directly at the center post (during the load is key though), I would still get the same vapor. (I'm not worried about the one and a half coil loops to the left on the left field of the cup, I can do without that loop and a half.)<by the way
edit add: In fact, now that the coil is spread out comfortably from one side of the cup to the other, I think I can do with a loop or two less
these ce2 cartos vape great, I can have a k808d1 battery shut down for recharge and the ce2 still putting out reasonable vapor
That looks like shrink tubing on the stem. Whatever it is, it will probably eliminate, or at least reduce the leakage at that point.
The plastic cup did not have much of a problem with leakage here because plastic has enough give for a tighter fit. This kind of a fit is not possible when a metal tube is inserted into something as hard as ceramic. The leaky ceramic cups that I have inspected are a sloppy fit between these two parts.
Perhaps you can refresh our memories.
I'm glad you mentioned this because I read it 3 times and every time I read it, I understood it less.
so what is the temperature of the black gunk vs when it's all orange? maybe we did forget
wow i just tried this e2 on my 808d battery and i think it works better than it does on my passthrough.
so after 1 1/2 days i started to get a burning taste so i rinsed it out and scrubed the coils then dry burned it. refilled it and its as good as new! wondering how many times i can repeat this process
so after 1 1/2 days i started to get a burning taste so i rinsed it out and scrubed the coils then dry burned it. refilled it and its as good as new! wondering how many times i can repeat this process
I ordered the kr808xl and I received the kr808 regular ones.
And there telling me to returned all the 808D regular ones.
So I have to pay for there mistake? No way am I returning these.
And there telling me to returned all the 808D regular ones.
So I have to pay for there mistake? No way am I returning these.
I'm glad you mentioned this because I read it 3 times and every time I read it, I understood it less.
sorry.
rofl; ok well 3 times is enough then, I wouldn't read it anymore...unless it's at least intelligible to the subconscious
That would be the discussion that ensued following Bad's wick burning demonstration.
Depends on the shade but probably around 980C
I noticed that ivape and awesomevapor doesn't have a mention to the revision level.
well... if they have them in stock now then they ordered some time ago. I don't think they are going to throw out their stock and I seriously doubt that RS is going to exchange them.
980 degrees? well that's well under the melting point of a gold connecting rod, which could provide current from the centerpost to the cup along the airstem!
_______
right, quick1, but because they went up on their sites recently, they have a good chance of being r3 or r3.5
_______
right, quick1, but because they went up on their sites recently, they have a good chance of being r3 or r3.5
Last edited:
Thanks, yeah, that does look like silicone at the base. Fine w/ me, I don't think that's where the old glue smell was coming from.
I got my sample Cartomizers from Bad and all I can say about this revision is HOLY COW AWESOME VAPING FROM THE FIRST FILL! It was a lot easier to widen the hole with a pin to use my own needle to fill. I am looking forward to their final revision more than ever. I wouldn't bother with the short ones and just get the xl's. I put a drip tip on as soon as I got one from the NW Vapors meetup Saturday and even with a full carto was able to sample drip many flavors right into the cup and after about 15 drags most of the flavors cleared and let me get back to my standard flavor.
These are so dang sweet!!
These are so dang sweet!!
On the regular size r4 cartos it now says they hold .6ml of liquid. The r4 holds less liquid? Why is that?
- Status
Similar threads
- Locked
- Locked
