Iatty
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
Been carrying mine around with me, walking in the Lakedistrict. In my pocket and in rucksack, not one drip.
My Iatty still hasnt arrived, Im glad that I am a patient man
I am attempting to be a patient man but I keep failing and checking the tracking number.
whatever that means
I didn't get a chance to order one because my student credit card didn't come through (I should really just get a prepaid huh?)... 
They sure look sweet though! I'm a sucker for shiny things. Let's see some more pics!
They sure look sweet though! I'm a sucker for shiny things. Let's see some more pics!
I didn't get a chance to order one because my student credit card didn't come through (I should really just get a prepaid huh?)...
They sure look sweet though! I'm a sucker for shiny things. Let's see some more pics!
Try the Greek site, they still have available stock. I just got mine and Hope u get one too.
I got mine today. It is indeed a very nice piece.
I took it apart and cleaned it, then used vaseline like Imeo recommends and went to put it all together. It was tough getting the ceramic with those two o-rings into the one plastic piece, but eventually I got it. Building the resistance wire was easy enough, and then it was together. I thought I had the connectors to use on my GGTS, but I couldn't find my my 901-510 adapters. All I had was a 510-901. So I ended up putting on it on a Provari to test (my coil is 2.3Ω) and it worked nice. Took a bit to get broke in and then the taste started coming on nicely. I moved it over to my Precious Lv1 and it works very nicely with it, even the same diameter. So I found a new found use for the Lv1 until I can acquire a 901-510 adapter or two. The IAtty is a work of genius IMO, right up there with the UFS. The cone idea is over the top, and makes the IAtty do what it does. The simplicity of how the coil makes contact for +/- connections, again genius. Will this replace my UFS. No. I like my UFS way to much, as it is integrated with my SSGGTS, has a sight glass, and is the ultimate lazy person's vape (IMO of course). My current lr510 atty in my UFS has been going strong for a month also and it is my daily vape. However, I currently have a nic high from the IAtty, so I can honestly say it is an incredible replaceable atomizer/tank. Plus, if I run out of 510 atomizers, I got something for that. I am pretty sure that anyone that gets one will not be disappointed with it.
I took it apart and cleaned it, then used vaseline like Imeo recommends and went to put it all together. It was tough getting the ceramic with those two o-rings into the one plastic piece, but eventually I got it. Building the resistance wire was easy enough, and then it was together. I thought I had the connectors to use on my GGTS, but I couldn't find my my 901-510 adapters. All I had was a 510-901. So I ended up putting on it on a Provari to test (my coil is 2.3Ω) and it worked nice. Took a bit to get broke in and then the taste started coming on nicely. I moved it over to my Precious Lv1 and it works very nicely with it, even the same diameter. So I found a new found use for the Lv1 until I can acquire a 901-510 adapter or two. The IAtty is a work of genius IMO, right up there with the UFS. The cone idea is over the top, and makes the IAtty do what it does. The simplicity of how the coil makes contact for +/- connections, again genius. Will this replace my UFS. No. I like my UFS way to much, as it is integrated with my SSGGTS, has a sight glass, and is the ultimate lazy person's vape (IMO of course). My current lr510 atty in my UFS has been going strong for a month also and it is my daily vape. However, I currently have a nic high from the IAtty, so I can honestly say it is an incredible replaceable atomizer/tank. Plus, if I run out of 510 atomizers, I got something for that
. I am pretty sure that anyone that gets one will not be disappointed with it.
Last edited:
Inner diameter/Cross section, in millimeters
I figured the measurements were in millimeters given the source. What is "Cross Section"? The first set of numbers is throwing me off. 2/2 and 4/1,5?
Is one of those for the large o-ring that goes on the base?
Not sure what I'm doing wrong here. Getting a lot of juice leaking out of the center connector. I have all the seals in place. I filled to just above the cone. Thought maybe the cone was opened too much. Was only opened 1mm as Imeo suggests. Even closed it all the way, still a lot of juice leaking.
Vapor and taste are awesome though. But the leaking has to go.
Any suggestions?
Vapor and taste are awesome though. But the leaking has to go.
Any suggestions?
Can someone confirm a few things for me about the iAtty?
Can you use stainless steel mesh with it for the wick?
Is it a standard 510 connector?
Does it have a tank inside?
There needs to be a new thread with pictures, specs, labeling, etc... there are just WAY too many pages to sift through just to get a few simple facts about this thing!
Can you use stainless steel mesh with it for the wick?
Is it a standard 510 connector?
Does it have a tank inside?
There needs to be a new thread with pictures, specs, labeling, etc... there are just WAY too many pages to sift through just to get a few simple facts about this thing!
Can someone confirm a few things for me about the iAtty?
Can you use stainless steel mesh with it for the wick?
Is it a standard 510 connector?
Does it have a tank inside?
There needs to be a new thread with pictures, specs, labeling, etc... there are just WAY too many pages to sift through just to get a few simple facts about this thing!
Imeo said he tried the SS with the wick and the results were not good. He didn't like it. A few others here have talked about trying it, I don't believe they've posted back about it though. Yes it is a standard 510 connector. Basically the iAtty is a tank. Holds 5ml. Inside the outer tube are well machined parts of SS and delrin (I believe) plastic that make up the atty. Lots of videos from Imeo on youtube.
Just got my iAtty in today. Still tweaking with it. Making the coils is easy. First one I made wasn't pretty but was at 1.7 oHm and performed well. Used it a few hours and took it all apart and made another coil. This one was easier to do and looked fairly good at completion. Came in at 2.0 oHm. Nothing to it really.
Can I ask how long of the resistance wire and no resistance wire you used to make it 1.7ohm and 2 ohm?
thanks!
Can I ask how long of the resistance wire and no resistance wire you used to make it 1.7ohm and 2 ohm?
I used 10cm of non-resistance wire and 5cm of resistance wire at .016mm.
or
4" of non-resistance wire and 2" of resistance wire.
Twisted the ends together using 1cm of wire from each end.
Last edited:
- Status
