Introducing the NEW Kanger EVOD MT BCC 2.4ml 1.8ohm Bottom Coil Changeable

[rdsok]

I can't add to the capacity discussion.... ( since I haven't got to order any yet )

But I will mention that the category still shows 2.4ml while the description now has the 1.5ml

 

[Harplayr]

"Kanger advertises that this will receive a fill of around 2.4ml but you are probably going to see filling capacity at around 2.0ml. This unit features a well performing 1.8ohm coil head. You can use regular T3 coil heads with this unit but they do not look as attractive as the native two-piece coil head base system created for the EVOD."

I had this in the second para of the description. Kanger had 2.4ml and I wasn't sure exactly how it would go...so I mnade that disclaimer.

It gets very confusing when Kanger posts 1.5ml on their website Kanger E-vod and then you see all sorts of other volumes displayed around the web. I wish I had the means to accurately measure it, but I trust you and Bad's info on this.

Regardless of the exact ml number...I LOVE these things!

 

[kellie]

I ordered 2 of them this morning. A purple of course and a black one. Wish there was a lime green battery. I love the Alienware green

 

[Jingles]

It gets very confusing when Kanger posts 1.5ml on their website Kanger E-vod and then you see all sorts of other volumes displayed around the web. I wish I had the means to accurately measure it, but I trust you and Bad's info on this.

Regardless of the exact ml number...I LOVE these things!

I agree with you Harplayr. I've had my Evod for two days now and I think it's becoming my favoorite JDS. Compared to the T3
there was no break-in period, no gurgling and the vape seems a little warmer. I got the Vapeonly at the same time and it had a burnt taste until I pulled a wick out. So far, the Evod beats everything else I've tried.

 

[orbach]

OMG jingles!! You're such a cute kitten! (sorry couldn't help myself )

So there's one vote for the EVOD over the Vapeonly. Is this because of the Vapeonly's initial dry burns experience and having to remove the wick or does it actually vape better than the Vapeonly in terms of vapor, taste, TH, etc.?

I agree with you Harplayr. I've had my Evod for two days now and I think it's becoming my favoorite JDS. Compared to the T3
there was no break-in period, no gurgling and the vape seems a little warmer. I got the Vapeonly at the same time and it had a burnt taste until I pulled a wick out. So far, the Evod beats everything else I've tried.

 

[Jingles]

Why thank you Orbach-you're not too bad looking yourself! I think the Evod actually vapes better for me. I'm getting tons of vapor out of it, although the juice is 100%VG in my Evod, whereas in my Vapoonly I have a 50/50 juice, so maybe it's not a fair comparison. The taste out of the Evod seems less "plastic" and more pure juice taste to me also compared to the Vapeonly. I'm sure I'll want to try the ProTank when it gets here too-no more plastic taste-yeah!

 

[orbach]

I agree on that Pro tank, it sure looks nice! And I'll try the EVOD too, thanks.

 

[zippersnapper]

OMG jingles!! You're such a cute kitten! (sorry couldn't help myself

Why thank you Orbach-you're not too bad looking yourself!

Ok you two...Get a room...

 

[zippersnapper]

I wish I had the means to accurately measure it

Fill with a syringe ??

 

[Harplayr]

Fill with a syringe ??

I don't quite know how to measure with a syringe. At what point of the black plunger thing do I read it at? The center tip is lower than the portion where it touches the glass.

 

[WallyO]

I don't quite know how to measure with a syringe. At what point of the black plunger thing do I read it at? The center tip is lower than the portion where it touches the glass.

Just line the rubber up with the mark on the tube. Any rubber protruding from that point in whatever shape is to allow for the extra at the tip of the syringe. If you just go by the lines on the tube it is accurate.

 

[Harplayr]

Just line the rubber up with the mark on the tube. Any rubber protruding from that point in whatever shape is to allow for the extra at the tip of the syringe. If you just go by the lines on the tube it is accurate.

Ok, I'll suck it dry and give it a try.


(it's national rhyme day)

 

[Moses195]

I have 2 of these and have been vaping them for about a week. This is THE BEST clearo or carto I have used in my short 43 days. Mine hold 1.6ml. No bad taste at all on mine. Great flavor and great clouds. So easy to clean too, I just wipe the atty head with a napkin, wash the tube out with hot water and refill. 1 time I washed the atty head but no more, It took too long to get it primed again.

Dana

 

[zippersnapper]

Just line the rubber up with the mark on the tube. Any rubber protruding from that point in whatever shape is to allow for the extra at the tip of the syringe. If you just go by the lines on the tube it is accurate.

Ok, I'll suck it dry and give it a try.


(it's national rhyme day)

You measure from the top of the plunger, not the bottom. (I'm a diabetic)
This allows for volume in the luer portion to be taken into account.

 

[Harplayr]

You measure from the top of the plunger, not the bottom. (I'm a diabetic)
This allows for volume in the luer portion to be taken into account.

So I filed the syringe to 2.0ml (no air) and ended up about 0.3 after fill so it gave me 1.7ml

So after all that, what does it mean?
Not much except that I love these things and I'm gonna get a bunch more

 

[tmoore]

I just checked tracking...I've got three more waiting for me in the mailbox at home. Woot!
As for capacity, I think the bottom line is that a moderate fill is 1.5ml, and you might squeeze in as much as 1.7-8 if you have a real steady hand and brim it out.

 

[zippersnapper]

So I filed the syringe to 2.0ml (no air) and ended up about 0.3 after fill so it gave me 1.7ml

So after all that, what does it mean?
Not much except that I love these things and I'm gonna get a bunch more

Amen Harp !!!!!

 

[Harplayr]

I just checked tracking...I've got three more waiting for me in the mailbox at home. Woot!
As for capacity, I think the bottom line is that a moderate fill is 1.5ml, and you might squeeze in as much as 1.7-8 if you have a real steady hand and brim it out.

That's a good way to put it.

 

[kellie]

I just mine in the mail. Filled them up took a couple of primer puffs and wow these are awesome. I love the way they look and the taste is great. Gonna have to get a few more of these. I hope replacement heads will be available soon. Now to find that Alienware green colored battery. Lol

 

[kellie]

I found a vision lime green battery