iTaste MVP v2 Owners Group

[Midniteoyl]

Hello

I had never stopped to read this thread but this morning I did some of it. What a wonderful helpful bunch of people I too am an MVP2 lover and have a few of them. I'm a basic keep it simple vaper and use my MVP's with my mini Protanks mostly. Great vape for me. I need to go back and read this whole thread. A friend of mine had given me some leather and I went to work sewing myself some lanyards for my MVP's. This is what I came up with (artwork painted by myself). Great for working out in the yard I don't sell these and I'm not a supplier, just wanted to show my love for the MVP to others who feel the same. I have given some away to people in the past and had a contest for a couple not long ago. Now I go back to reading some more Have a great day !

Ag, good to see ya outside the GotVapes thread Those are some mighty nice holsters/lanyards you made there.. Very nice work What would it take to get one made?

 

[AG51]

Ag, good to see ya outside the GotVapes thread Those are some mighty nice holsters/lanyards you made there.. Very nice work What would it take to get one made?

Hi Midnite ! Every once in awhile I venture out into the big world of ECF So much I have yet to see in this place. I get stuck in an area and just never get out for a bit my bad I don't have too awful much leather left but I'm thinking of getting some more. When I do I could make some gifts for some people it'll be awhile though

 

[gandymarsh]

Those leather wraps are beautiful! I have seen a few online but they are very expensive. Not surprising because there must be many hours of work involved.

The closest I'll probably get is a the imitation carbon fiber one that was thrown in with my MVP Energy or a homemade one using a 4" x 8" sample of imitation Black Alligator Skin that I bought on Ebay. It should look fairly good if I ever get around to cutting it out, that is if I don't mess it up .

 

[AG51]

Those leather wraps are beautiful! I have seen a few online but they are very expensive. Not surprising because there must be many hours of work involved.

The closest I'll probably get is a the imitation carbon fiber one that was thrown in with my MVP Energy or a homemade one using a 4" x 8" sample of imitation Black Alligator Skin that I bought on Ebay. It should look fairly good if I ever get around to cutting it out, that is if I don't mess it up .

Thank you Gandymarsh I bet that alligator will look great ! I'd love to see it when you get it done I just made mine out of needing one for being outside with no pockets Then I discovered I liked it and made some more

 

[shorty70]

@AG51...very nice.

 

[gandymarsh]

You're Welcome,

It may be awhile before I get it done but here's a what it looks like from the Ebay listing. I'll only post the finished product if it turns out OK

 

[Keirster]

You're Welcome,

It may be awhile before I get it done but here's a what it looks like from the Ebay listing. View attachment 344498 I'll only post the finished product if it turns out OK

Wow, that is gonna look great!!! I want one

sent from my tablet using Tapatalk

 

[lauraisFRKNAWSM]

I guess it's time for me to say hello

 

[Keirster]

The MVP and a Russian or Kayfun are the perfect duo...welcome.

sent from my tablet using Tapatalk

 

[Buggainok]

Hello

I had never stopped to read this thread but this morning I did some of it. What a wonderful helpful bunch of people I too am an MVP2 lover and have a few of them. I'm a basic keep it simple vaper and use my MVP's with my mini Protanks mostly. Great vape for me. I need to go back and read this whole thread. A friend of mine had given me some leather and I went to work sewing myself some lanyards for my MVP's. This is what I came up with (artwork painted by myself). Great for working out in the yard I don't sell these and I'm not a supplier, just wanted to show my love for the MVP to others who feel the same. I have given some away to people in the past and had a contest for a couple not long ago. Now I go back to reading some more Have a great day !

Wow! I am impressed with your sewing skill with leather - but even more so by your lovely artwork. You've got a ton of talent!

There is a shop on Etsy that sells some kind of like yours. If you want to go into business, I'm sure you could sell every one you make!

 

[gerrymi]

now if innokin got there heads together and made and MVP 3 with a dna 30 chip id be so all over that.

How about this:

$56.00 HANA MODZ Pack DNA 30 Style Mod - built-in 2*600mAh Li-Po / 7W-30W at FastTech - Worldwide Free Shipping

 

[Tybo88]

Just picked my kayfun I'm loving it!

 

[Midniteoyl]

Hi Midnite ! ..... I don't have too awful much leather left but I'm thinking of getting some more. When I do I could make some gifts for some people it'll be awhile though

Ya, I gotta limit where I go... soo easy to get lost in this big a place


I got time, I can wait on my lanyard .... No, not really they are really nice work though

 

[clnire]

Hi Midnite ! Every once in awhile I venture out into the big world of ECF So much I have yet to see in this place. I get stuck in an area and just never get out for a bit my bad I don't have too awful much leather left but I'm thinking of getting some more. When I do I could make some gifts for some people it'll be awhile though

I do leatherwork for a living, check out Tandy Leather, the Hide House, the Leather Factory (I think they own Tandy now). Google is your friend as I do not have links on my phone. I have been wanting to make some just no time.

Beautiful work AG. I can really appreciate what went into these. When I get some time at home I need to work on this project.

pardon the typos, on my phone

 

[PaulBHC]

Wrapped mine today with a light gray stone sample. I am reminded why I don't do arts and crafts. Good enough though. Texture makes it easier to handle.

 

[gandymarsh]

Wow, that is gonna look great!!! I want one

sent from my tablet using Tapatalk

Well, you can buy the material on Ebay for about $2.50 free shipping but you will need to cut it out yourself The seller is shown in the photo (the red print). I printed a template found on this forum. http://www.e-cigarette-forum.com/fo...on/473345-itaste-mvp-v2-owners-group-107.html I found that printing it from the web turned out to be more accurate than downloading it to my machine for some reason.

 

[DingerCPA]

For anybody looking for another MVP, Vapor Bank has them on sale for 34.99

And they have wraps for $0.79 each!

 

[DingerCPA]

Well folks.. As some of you may know, my wife was having some medical problems and her doc sent her to the ER Thursday... During the CT scan, they found a Pancreatic Cyst. Well, today, we just got the news that her blood work shows 4 elevated cancer markers (19-9 very high)...


I dunno... thought I say something... I prolly wont be around much...

Midnite - so sorry to hear. Sending positive thoughts and prayers.....

 

[NYracefan]

Just bought an MVP verion 2 (camo) today, so far I like it.

 

[amoret]

For anyone else who does have problems with the button on the MVP being hard to push, I have at least a start on a fix. I was being annoyed at having to keep charging my VV v3s on bad hand days, so I spent some time staring at the VV v3s and the MVPs trying to figure out what the differences were.

I think that the problem is mainly that the button on the MVP is recessed further into the bezel around it. This makes it so you actually have to push harder, and right on the button.

So I tried a kludge of sticking a small piece of foam on the button. What I had on hand to try it with was a pad intended to go under a furniture leg. So I cut a small piece off and stuck it to the button. It is a great help. The stuff I had is too thick -- it sticks out so far that it is going to get knocked off -- but the combination of the higher surface and the cushioning from it works.

So my next step is going to be to try to figure out a better material. I tried electrical tape, but while that helps some it is not thick enough, and due to my hand problems I've had no luck trying to layer it, so the search is on. I'm thinking maybe some "craft foam" but not sure yet.

I tried getting a picture, but the stuff on the button doesn't show well.