iTaste MVP v2 Owners Group

Status
Not open for further replies.

lisancentraltx

Vaping Master
ECF Veteran
Verified Member
Aug 28, 2009
4,173
9,491
59
Ringling Brothers Circus
Well, I opened up the Iphone wraps I got for the MVP because I adore the little bugger and want to avoid any scrapes - I've already dropped it when running with the pup and juggling gear. The 5 pack of Iphone wraps WOULD fit perfectly with a small amount of trimming BUT... they have the Apple logo CUT OUT! LOLOLOLOL I'mma pick up one from a vendor instead now :p The black weave looks very nice =]

I vaped the MVP2 all night on a manufacturer's charge and it showed yellow just a bit ago so I've got it on my cell phone charger now =] No reason to use the funky charger it comes with.

I haven't found anything that's a deal breaker... the button reminds me of my cell phone button, won't get cut on when I have it in a pocket and although the base of my thumb is sore from vaping, I am fine with it. I actually prefer the sore thumb to my entire hand aching with the bottom button mods. I've had to pull the pin out 2x already to use with both Protanks and Boge carto tanks, which I really DON'T like to do, but I am especially careful. The MVP heats up the Protanks too much for me, even on the lowest setting, so I'm glad that I've got a stash of Iclear 30s that I've never used =]
 

Caffeine7

Super Member
ECF Veteran
Verified Member
Sep 16, 2013
481
729
Riverside, ca
wonder how hard it will be to get thru airport with these.....last year all I had was some 808's and they didn't say anything about them. but now with the Ego's. VV3 and the MVP might be a different story.
I fly weekly and haven't had an issue, I keep my mvp, an ego case with tanks and 2 back up ego batteries and another small case with a few juices in my carry on and never even a question
 

lisancentraltx

Vaping Master
ECF Veteran
Verified Member
Aug 28, 2009
4,173
9,491
59
Ringling Brothers Circus
Speaking of scrapes lisancentraltx.. I've just noticed a couple!! :(. Looks like I shouldn't be putting it in my pocket with keys, rookie mistake.

Jwraps here I come..:thumbup:

I didn't think it's scrape that easily! I've got a wrap on it, but it's a partial job, so I'm heading over there to check out the wraps as well... I'm loving this little bugger and feeling a bit selfish that I have another coming in on a slow boat from China... TELL ME IF you find a good selection elsewhere! I have a coupon code here somewhere... I'll sent it to you!
 

pufZeppelin

Vaping Master
ECF Veteran
Jul 6, 2013
7,610
24,603
Florida, SW
I've had to pull the pin out 2x already to use with both Protanks and Boge carto tanks, which I really DON'T like to do, but I am especially careful.
The MVP heats up the Protanks too much for me, even on the lowest setting, so I'm glad that I've got a stash of Iclear 30s that I've never used =]

what Ω coil are you using ? maybe step up a notch or two {1.8-2.2-2.5}
might cool it down, if that's what your looking for...

Vape≈On :2cool:
 

cmdebrecht

Super Member
ECF Veteran
Aug 19, 2013
744
1,667
Saint Louis, Missouri
I've been using mine for over 3 weeks and either it's loosened up or I've become use to it. The v1 is suppose to have a lighter press.

I will give it a few more weeks then. I understand it may be a safety feature but compared to my eVod it's like walking uphill. Ahhh well it's worth it though.
 

cmdebrecht

Super Member
ECF Veteran
Aug 19, 2013
744
1,667
Saint Louis, Missouri
So will a wrap help me to not drop mine? I am extraordinarily clumsy and my hands don't always do what they're told. I am super paranoid about dropping it because although surface isn't exactly slippery, it is smooth and I am just worried it's not grippy enough. I would hate to spend that much money on a wrap only to make the problem worse....
 
Last edited:

WelshVapour

Super Member
ECF Veteran
Verified Member
Oct 17, 2013
599
20,735
wales, UK
I didn't think it's scrape that easily! I've got a wrap on it, but it's a partial job, so I'm heading over there to check out the wraps as well... I'm loving this little bugger and feeling a bit selfish that I have another coming in on a slow boat from China... TELL ME IF you find a good selection elsewhere! I have a coupon code here somewhere... I'll sent it to you!

Ah aren't you lovely, I'll be sure to let you know what I find and thank you.

So will a wrap help me to not drop mine? I am extraordinarily clumsy and my hands don't always do what they're told. I am super paranoid about dropping it because although surface isn't exactly slippery, it is smooth and I am just worried it's not grippy enough. I would hate to spend that much money on a wrap only to make the problem worse....

Maybe a textured wrap would offer some grip, I'm not entirely sure as to their availability, if I come across any, I'll post a link.


Sent from my GT-I9505 using Tapatalk
 

cmdebrecht

Super Member
ECF Veteran
Aug 19, 2013
744
1,667
Saint Louis, Missouri
Very minor scrapes, could hardly see until I purposefully checked for any.

As somewhat of an artist, I'll be considering a custom wrap of my own design I thfink.

Jwraps ship to the UK right? Believe I read they do, better double check.

Sent from my GT-I9505 using Tapatalk

If you find something that doesn't ship to you across the pond, I can forward for you.
 

whodat2112

ECF Guru
ECF Veteran
May 13, 2012
26,771
106,090
Mississippi Just Outside Of NOLA
ordered me an mvp from 101vape.com on friday. should be here soon since im close to the facility. it was a steal at 39$ for the clear 30 kit. i cant wait. says they are out of stock now but will be restocked

Innokin iTaste MVP V2.0 - 101 Vape

You and I must have gotten the last few as I ordered mine Saturday

Sent from my Galaxy S3
 
Status
Not open for further replies.

Users who are viewing this thread