iTaste MVP v2 Owners Group

Status
Not open for further replies.

rem700

Super Member
ECF Veteran
Verified Member
Jul 29, 2011
451
126
Mn
Well I have had this for a few days now and hate the button:mad:
I took a piece of leather from an old jacket and cut a piece the same size as the button and using double sided tape affixed it on the button which keeps my knuckle from bottoming out against the light bezel.
Other then the button issue I like it well enough that I ordered another one from 101 for the wife, I will try a piece of self stick rubber the kind used on steps and ladders and such this time on the button.
 

mgavilondo

Super Member
ECF Veteran
Verified Member
Oct 19, 2013
308
1,712
Can't help you with the Aspire but I want to send you some moral support to get through the day stinky free. Hit the corner store and get a disposable if you have to. Any thing but the cancer sticks.

Stay strong!

Thanks for that.. Broke down at lunch and grubbed a stinky took 3 puffs and ditched it.. Tasted like ...! I know.. Hate disposables almost as much.. Luckily it was the coil in screwed up so just replace a when I got home.. I'm good to go now


Sent from my iPhone using Taptalk
 

HawaiiVPR

Moved On
Oct 19, 2013
755
894
808 State
dxxm34.jpg


Just love this device, I finally got it setup just right for my preference ;)

Seems there are so many satisfied users of this mod ranging all the way from the total newb to longtime vapers. Innokin really made a winner here, low cost, multi use and great performance. It looks like it even beats innokins own line of other devices in terms of output signal and consistency!
 

Pinggolfer

Vaping Master
ECF Veteran
Verified Member
Jul 28, 2013
6,891
18,798
The Clemson Tigers State
My second MVP 2 arrived a few minutes ago. I ordered the Metallic Blue, however it looks more like silver with a tint of blue. The packing list says Blue. In any event I ordered it from Vape 101 on Thursday afternoon and it just arrived. CA to SC in less the two days.

It sure looks more blue on the website.
 
I have been trying to find the perfect setup for my MVP 2.0 and I just can't get away from the iClear 16. I've tried the Protank, and the EVOD, but I can't get past the iClear 16. I'm getting the hot hit from the dual top coils and never a dry hit. Plus, this same factory clearo that came with my MVP is STILL going strong after over a month, never replaced the coils or wicks. My question is, has anyone used the Iclear 30S? I've been wanting one, but I'm wondering if it is as good or better than the iClear 16. Anyone?
 

Capt.shay

Vaping Master
ECF Veteran
Verified Member
May 10, 2013
3,662
8,189
W. Ma. U.S.A.
I have been trying to find the perfect setup for my MVP 2.0 and I just can't get away from the iClear 16. I've tried the Protank, and the EVOD, but I can't get past the iClear 16. I'm getting the hot hit from the dual top coils and never a dry hit. Plus, this same factory clearo that came with my MVP is STILL going strong after over a month, never replaced the coils or wicks. My question is, has anyone used the Iclear 30S? I've been wanting one, but I'm wondering if it is as good or better than the iClear 16. Anyone?

I like the vape from the 16 better than the thirty. The thirty can get there but you have to get it good and warmed up first. I recommend the Kanger T2 for those who like the warm vape. It doesn't suck down juice like the 15 and it has a 2.4ml capacity. You need to run a 510-ego connector to get proper air flow on the MVP however, not a big deal to me. If you order one get the long wicks. They wick better.

(Still waiting on Lindsay to weigh in on her feelings when hers come in)
 

Nailz

Vaping Master
ECF Veteran
Verified Member
  • Jun 6, 2013
    6,582
    30,401
    Wichita, KS
    My second MVP 2 arrived a few minutes ago. I ordered the Metallic Blue, however it looks more like silver with a tint of blue. The packing list says Blue. In any event I ordered it from Vape 101 on Thursday afternoon and it just arrived. CA to SC in less the two days.

    It sure looks more blue on the website.

    I have the silver/blue one, it is more silver than blue, but do the see the blue come through in some lights, but yes would of liked it to be more blue than it is, but still happy with it :)
     

    Capt.shay

    Vaping Master
    ECF Veteran
    Verified Member
    May 10, 2013
    3,662
    8,189
    W. Ma. U.S.A.
    My second MVP 2 arrived a few minutes ago. I ordered the Metallic Blue, however it looks more like silver with a tint of blue. The packing list says Blue. In any event I ordered it from Vape 101 on Thursday afternoon and it just arrived. CA to SC in less the two days.

    It sure looks more blue on the website.

    I have the silver/blue one, it is more silver than blue, but do the see the blue come through in some lights, but yes would of liked it to be more blue than it is, but still happy with it :)

    Wrap That Rascal !
     

    Nailz

    Vaping Master
    ECF Veteran
    Verified Member
  • Jun 6, 2013
    6,582
    30,401
    Wichita, KS
    I have been trying to find the perfect setup for my MVP 2.0 and I just can't get away from the iClear 16. I've tried the Protank, and the EVOD, but I can't get past the iClear 16. I'm getting the hot hit from the dual top coils and never a dry hit. Plus, this same factory clearo that came with my MVP is STILL going strong after over a month, never replaced the coils or wicks. My question is, has anyone used the Iclear 30S? I've been wanting one, but I'm wondering if it is as good or better than the iClear 16. Anyone?

    I got a lot of the iclear 16's, but find they do not keep up my vaping, get burnt hits with them, the iclear30 is slightly better, but still get burnt hits when take 3-4 hits close together, my prefect match right now is the aspire BDC's, with the dual coil, you get a warm flavorful hit with big clouds, and being bottom coil, I find they keep up with my vaping style with no dry/burned hits.
     

    HawaiiVPR

    Moved On
    Oct 19, 2013
    755
    894
    808 State
    I have been trying to find the perfect setup for my MVP 2.0 and I just can't get away from the iClear 16. I've tried the Protank, and the EVOD, but I can't get past the iClear 16. I'm getting the hot hit from the dual top coils and never a dry hit. Plus, this same factory clearo that came with my MVP is STILL going strong after over a month, never replaced the coils or wicks. My question is, has anyone used the Iclear 30S? I've been wanting one, but I'm wondering if it is as good or better than the iClear 16. Anyone?

    iclear16 is a great clearomizer, still one of my favorites, awesome vapor and flavor producer that is very easy to refill and maintain.

    Chances are, if you like the iclear16, you will like the iclear30 and iclear30-s. What resistance do you have on it and what power or voltage are you running it at?
     

    lisancentraltx

    Vaping Master
    ECF Veteran
    Verified Member
    Aug 28, 2009
    4,173
    9,491
    59
    Ringling Brothers Circus
    I have been trying to find the perfect setup for my MVP 2.0 and I just can't get away from the iClear 16. I've tried the Protank, and the EVOD, but I can't get past the iClear 16. I'm getting the hot hit from the dual top coils and never a dry hit. Plus, this same factory clearo that came with my MVP is STILL going strong after over a month, never replaced the coils or wicks. My question is, has anyone used the Iclear 30S? I've been wanting one, but I'm wondering if it is as good or better than the iClear 16. Anyone?

    iclear16 is a great clearomizer, still one of my favorites, awesome vapor and flavor producer that is very easy to refill and maintain.

    Chances are, if you like the iclear16, you will like the iclear30 and iclear30-s. What resistance do you have on it and what power or voltage are you running it at?

    I've been vaping with my Boge carto tanks because the vape is MAGNIFICENT, but I don't like the looks of it for out and about :/ My tanks are monster sized... This AM I considered changing out the tank on a MVP2 and taking is, but I just couldn't figure out what to take... I ended up grabbing my tried and true silver eGo with the Vision Eternity... I just LOVE the look of it. Not much juice, 45 minute walk and I am dry... I wish there were an atty with the sleek lines of the vision eternity but with some room for juice! has anyone run into one?

    I haven't even tried the iClear 16s... I'll do that this weekend
     

    pufZeppelin

    Vaping Master
    ECF Veteran
    Jul 6, 2013
    7,610
    24,603
    Florida, SW
    :tumble:
    you know a few days ago I was pondering why I hold on to my MVP so much...

    I always 'clutch-it', so much I worry about wearing the painted surface off of it -
    it just feels good to hold, grasp onto...

    I was thinking it is almost like grabbing the shifter knob in my car (nice feel while spirited driving)

    then it just hit me ! this thing is so familair because it is approximately the same size and dimension
    as the grip on a .45 auto (1911)--then I thought of those cheap slip on rubber grips -
    I wondered if I had any laying around so I looked and didn't find any (this is what I mean)
    - Hogue Handall Junior Universal Slip-On Grip Sleeve Rubber (clk on pink one)

    one of these might make a cool gripper and/or stand for the MVP .45 auto...
    maybe even look for a wrap that would be similar

    Vape≈like it's self protection... ;)
     

    Pinggolfer

    Vaping Master
    ECF Veteran
    Verified Member
    Jul 28, 2013
    6,891
    18,798
    The Clemson Tigers State
    I have the silver/blue one, it is more silver than blue, but do the see the blue come through in some lights, but yes would of liked it to be more blue than it is, but still happy with it :)

    Funny during the day it's more silver. Now tonight it's more blue but closer to grey. Must be the metallic paint. I'm loving it though.
     

    Capt.shay

    Vaping Master
    ECF Veteran
    Verified Member
    May 10, 2013
    3,662
    8,189
    W. Ma. U.S.A.
    Received the wifes MVP2 from 101 today Ca to Mn in two days.
    Don't know if they addressed the button issue or we received a fluke the button pressure is only 1lb compared to mine which measured 1 3/4lbs.

    One more to the fold!

    Tell us, is the on/off button on the bottom still sticking out a little or are they finally making it flush with the bottom ?
     
    Status
    Not open for further replies.

    Users who are viewing this thread