So the owner of my local B&M gave me an innokin pouch for my MVP. Some sort of promotional item I guess. It's kind of like a "Koozie".
iTaste MVP v2 Owners Group
- Thread starter KnurledNut
- Start date
- th_trl_thread_readers 0
- Status
I want one too.
What I really want is a rubber end cap that you can stick the bottom of the MVP in to protect you from setting the thing down in a pool of liquid on the table. A little form fitting black rubber end cap that fits the entire bottom would be great. That way it would protect both the recharge port and USB port so you don't get them wet. I'm seriously thinking of putting electrical tape across the ports to have some small level of protection. I looked at USB covers and Micro USB covers but they protrude and would cause the thing to be unstable.
hey now, that looks damn cool (except the Not For Sale)
is there a strap ring on it ... ? (so to hang)
first I've seen of one
Just got my MVP today. I actually tried one a couple of months ago but ended up not caring for the box mod design.
This time I think it will be a keeper for me to use as my home unit.
I couldn't pass up the bargain price at 101 vape. $43 shipped and I had it four days after placing the order
I'm using with an Aspire BDC Glass Vivi Nova I got from Elite Vaporworks, another bargain, $10 shipped!
Fantastic combination!
This time I think it will be a keeper for me to use as my home unit.
I couldn't pass up the bargain price at 101 vape. $43 shipped and I had it four days after placing the order
I'm using with an Aspire BDC Glass Vivi Nova I got from Elite Vaporworks, another bargain, $10 shipped!
Fantastic combination!
Just got my MVP today. I actually tried one a couple of months ago but ended up not caring for the box mod design.
This time I think it will be a keeper for me to use as my home unit.
I couldn't pass up the bargain price at 101 vape. $43 shipped and I had it four days after placing the order
I'm using with an Aspire BDC Glass Vivi Nova I got from Elite Vaporworks, another bargain, $10 shipped!
Fantastic combination!
View attachment 287167
Congratulations! I am using mine with my ismoka bcc mega right now running at 4v with some MBV strawberry kiwi. Not my favorite juice from them but it's not bad either..
Sent from my DROID4 using Tapatalk
The "Not for sale" is printed on it so from Innokin. No strap, or belt loop, does not sit upright with the MVP in it, just what you see. I guess it could be used like a mitten in colder climates. I don't see a lot of use for it here in Texas, unless others have suggestions.
I would interested in hearing how it goes. It get by through barely screwing only clearos and PT2.
Well that's kinda cool lookin'. Does it have a loop on it for a belt? Not a big fan of hanging MODs around my neck. Bought a cheap, small cell phone case and it works great (for me) with my Mini Pro (shown), Evod and 30. The case has a little gap on the side at the bottom and doesn't interfere with the watt/volt buttons. No problem with the power button either.
View attachment 287401 View attachment 287402
Happy Vaping!
It's always in my hand unless I'm sleeping. It is on the charger at that point. Here is my answer to a holder.
Sent from my DROID4 using Tapatalk
I really like my 'itaste' stuff. The MVP2 would be my go-to PV when out of the house but for the issue of being to hard (for me) to press the fire button.
I also have an itaste VV3 - that I love, easier to push the fire button, and since it's not round, it doesn't roll - but it doesn't have quite enough power for an entire day away from home - so I must bring something else with me. Bad hands here and I drop stuff all the time. I enjoy my ProVari but won't take it out of the house - if only the MVP had a softer fire button.
FYI? I had charged it and turned it off about six weeks ago when I bought my ProVari - today it is still showing 4.2 volts, yet my eVic (also charged and turned off) was dead, needed to charge for 10 minutes just so I could turn it on.
To be honest, I need/want a 'plastic' mod that is VW - as cold metal makes my hands ache - I wonder if a 'wrap' would solve that on the MVP or ProVari?
I also have an itaste VV3 - that I love, easier to push the fire button, and since it's not round, it doesn't roll - but it doesn't have quite enough power for an entire day away from home - so I must bring something else with me. Bad hands here and I drop stuff all the time. I enjoy my ProVari but won't take it out of the house - if only the MVP had a softer fire button.
FYI? I had charged it and turned it off about six weeks ago when I bought my ProVari - today it is still showing 4.2 volts, yet my eVic (also charged and turned off) was dead, needed to charge for 10 minutes just so I could turn it on.
To be honest, I need/want a 'plastic' mod that is VW - as cold metal makes my hands ache - I wonder if a 'wrap' would solve that on the MVP or ProVari?
I LOVE my MVP2
BUT
I'll join the contact pin complainers. Mine is less than a month old and its looooose to the point I'm thinking of sending 101vape and innokin both emails. Every other switch of a clear etc etc has me needing a pin of some kind. There are opened paperclips in the car, the living room the desk etc etc .this is becoming a Pain in the .....
I'll join the contact pin complainers. Mine is less than a month old and its looooose to the point I'm thinking of sending 101vape and innokin both emails. Every other switch of a clear etc etc has me needing a pin of some kind. There are opened paperclips in the car, the living room the desk etc etc .this is becoming a Pain in the .....
Just received my black carbon fiber MVP2 in the mail from 101Vape!
It's been sitting outside in the now 0 degree winter for close to 9 hours until I returned home. After I opened it up, took out all of the accessories, I cleaned off the contacts and let it warm to close to room temperature, while rinsing out the iclear30. Even after sitting outside in the cold, as soon as I turned it on, it was reading 4.1 volts still -- close to a full charge. My T2's fit no problem, ohms checked and read, fires well. Love the clicky button! I actually can feel if I'm pressing it or not, which was hard to tell with the 1.5 version.
I tested a Phoenix V1 RDA, and my iclears on them and everything can be read. No airflow issues yet either.
So far, 1 hour into the unboxing, I am loving the MVP v2 -- as I knew that I would! Looking forward to a full day tomorrow (Christmas Eve) at work with it.
It's been sitting outside in the now 0 degree winter for close to 9 hours until I returned home. After I opened it up, took out all of the accessories, I cleaned off the contacts and let it warm to close to room temperature, while rinsing out the iclear30. Even after sitting outside in the cold, as soon as I turned it on, it was reading 4.1 volts still -- close to a full charge. My T2's fit no problem, ohms checked and read, fires well. Love the clicky button! I actually can feel if I'm pressing it or not, which was hard to tell with the 1.5 version.
I tested a Phoenix V1 RDA, and my iclears on them and everything can be read. No airflow issues yet either.
So far, 1 hour into the unboxing, I am loving the MVP v2 -- as I knew that I would! Looking forward to a full day tomorrow (Christmas Eve) at work with it.
Just got my Black Drawbench carbon MVP 2.0 iClear30 Kit from luxorvapes off ebay.
Paid $41, lot more now for some reason? Probably Innokin again.
Anyway, thing seems really nice so far. Except for the Aspire BDC
and the old Vision Viva nova tanks.
You guys know why these wont work on there?
Paid $41, lot more now for some reason? Probably Innokin again.
Anyway, thing seems really nice so far. Except for the Aspire BDC
and the old Vision Viva nova tanks.
You guys know why these wont work on there?
Last edited:
What type of problem are you having with the BDC?
I use the vivi style BDC on my MVP and the mini vivi style on my iTaste VV - 100%VG juice and they've been completely fiddle free for me.
The best way to find out what they have to say would be to write them yourself. The more they hear it, the more likely hood of them addressing it.
PLEASE write Innokin.
It's the connection issue.
We need to let Innokin hear us on this. They have made many improvements on the MVP and VV V3. With many of these, they seem to be able to adjust mid run on the fly (I.E. button wobble and fire button). They are a responsive company so let them hear about it.
In the mean time. Slap 510/ego adapter on there and vape away happily. I use a small ego cone to cover the adapter.
I am a huge T-2 fan but they will not run properly on my V2 and they would not run properly on my V1. They fire just fine but they can not breath properly. You end up flooding and getting a very weak vape. I have both genuine Kanger T2's and knock off T-2's. and I can not get either kind to work properly without using a 510/ego adapter.
Are you experiencing any of this and what kind of T-2's are you using.
- Status
Similar threads
