iTaste MVP v2 Owners Group

[Susaz]

you-bet-cha – second floor, isle 8 (just past women's lingerie)

- JOYE eCom-C Twist
- Smoktech ARO Winder - 1500mah - Black
- Smoktech eMax Variable Wattage Ego Twist 11000mah - Stainless

I have my eyes on the CLK!, being a passthrough I don't need that much power.

 

[pufZeppelin]

Note to self: never try completely dissassembling an rba next to the kitchen sink, especially with the water running.

I screwed up guys. I had some time today and decided to completely take apart the Russian 91% to see if I could find any problems with it.
Unfortunately the plastic isolator rectangle under the center metal block (which is secured by the screw that contacts the MVPs center terminal) is now lost to the municipal sewage system

I surely havent had much luck with this Russian. I understand its (mostly) parts compatible with a Kayfun Lite Plus, but Ive seen mentions that certain parts arent the same, and ive also read comments where the wrong part was sent.

Do any of you have a link to a vendor thats quick (note: this by definition excludes "fasttech" ) who you know for sure has the right part? I just want to make sure I order the right one; dont care if its 99 cents or 4 dollars.

Hopefully after I get that my thorough cleaning/soaking will have fixed my wicking problem.

wowzer, bummer man, but hey, it happens
get back on the horse & vape...

- Kayfun Deck Insulators - 5 pack - Kidney Puncher
- SHOP - FatDaddyVapes.com - Home of the best vape tweaks and replacement hardware.

 

[Susaz]

Note to self: never try completely dissassembling an RBA next to the kitchen sink, especially with the water running.

I screwed up guys. I had some time today and decided to completely take apart the Russian 91% to see if I could find any problems with it. Unfortunately the plastic isolator rectangle under the center metal block (which is secured by the screw that contacts the MVPs center terminal) is now lost to the municipal sewage system

I surely havent had much luck with this Russian. I understand its (mostly) parts compatible with a Kayfun Lite Plus, but Ive seen mentions that certain parts arent the same, and ive also read comments where the wrong part was sent.

Do any of you have a link to a vendor thats quick (note: this by definition excludes "Fasttech" ) who you know for sure has the right part? I just want to make sure I order the right one; dont care if its 99 cents or 4 dollars.

Hopefully after I get that my thorough cleaning/soaking will have fixed my wicking problem.

Maybe it's a good idea to buy a full base.
This comes to mind a conclusion I reached today... While I have the KF I'll use it, but it's not such a perfect vape compared to the Vapeonly. Period

 

[PaulBHC]

I knew puff would come through with the links. thumbs up thingy

I ordered a Coolfire I. It is regulated to 8.5 watts. Wifey has been using my little mech and changing the battery when the vape gets weak. I showed her my Zmax and the menu made her head spin. Not like Linda Blair but you know what I mean. Anyway I think she will like the CF and if not I will use it. Just have to match the coils to the watts. 29.95 for the mod and a i30b clearo with 20% off I'll take a chance.

 

[pufZeppelin]

I have my eyes on the CLK!, being a passthrough I don't need that much power.

yepper, those CLK ! , look kinda cool

as I looked at them, kept getting confused buy the prices
then realized was looking / comparing 800 & 1280 mah's


- DiscountVapers.com - Search Results for "itaste CLK"
- Innokin iTaste CLK Battery
- Innokin Itaste CLK Kit | Vapor World

 

[pufZeppelin]

I knew puff would come through with the links. thumbs up thingy

I ordered a Coolfire I. It is regulated to 8.5 watts. Wifey has been using my little mech and changing the battery when the vape gets weak. I showed her my Zmax and the menu made her head spin. Not like Linda Blair but you know what I mean. Anyway I think she will like the CF and if not I will use it. Just have to match the coils to the watts. 29.95 for the mod and a i30b clearo with 20% off I'll take a chance.

something about the simplicity of this one catches my eye
no screen/menu to fool with, mix-n-match top rings, dial-a-watt, center pin is spring-loaded,
mesh hand grip/venting - just looks simple, durable...

- SmokTech Rocket
- SMOK Rocket VV/VW Mod

 

[Traijan]

Okay, I got my 3M vinyl sticky stuff in the mail box today. I've saved and printed out the template.

My only question now is how in the world do you cut out the windows for the MVP display window and power button so that you get the nice curved corners? Scissors definitely isn't going to cut it (so to speak).

Thanks

 

[pufZeppelin]

Okay, I got my 3M vinyl sticky stuff in the mail box today. I've saved and printed out the template.

My only question now is how in the world do you cut out the windows for the MVP display window and power button so that you get the nice curved corners?
Scissors definitely isn't going to cut it (so to speak).

Thanks

put a bullet in your mouth, and grind it out...

- X-ACTO Knives | Cutting Tools, Hobby Knives, Craft Knives

- X-ACTO Designer Series Corner Rounder Punch | X-ACTO Tools

 

[Traijan]

Awesome, thanks pufZeppelin.

I would never have even thought that there might be something like that corner rounder punch tool you linked. Checked it out, seems they sell them at many Walmarts so I'll try that tomorrow to see if they have any locally. I think the black carbon fiber sort of looking vinyl should look nice on the MVP but not unless I can get it as close to perfectly cut out and laid as is humanly possible.

Anyway, thanks.

 

[Storm52]

SHOP - FatDaddyVapes.com - Home of the best vape tweaks and replacement hardware.

Note to self: never try completely dissassembling an RBA next to the kitchen sink, especially with the water running.

I screwed up guys. I had some time today and decided to completely take apart the Russian 91% to see if I could find any problems with it. Unfortunately the plastic isolator rectangle under the center metal block (which is secured by the screw that contacts the MVPs center terminal) is now lost to the municipal sewage system

I surely havent had much luck with this Russian. I understand its (mostly) parts compatible with a Kayfun Lite Plus, but Ive seen mentions that certain parts arent the same, and ive also read comments where the wrong part was sent.

Do any of you have a link to a vendor thats quick (note: this by definition excludes "Fasttech" ) who you know for sure has the right part? I just want to make sure I order the right one; dont care if its 99 cents or 4 dollars.

Hopefully after I get that my thorough cleaning/soaking will have fixed my wicking problem.

 

[Midniteoyl]

Note to self: never try completely dissassembling an RBA next to the kitchen sink, especially with the water running.

I screwed up guys. I had some time today and decided to completely take apart the Russian 91% to see if I could find any problems with it. Unfortunately the plastic isolator rectangle under the center metal block (which is secured by the screw that contacts the MVPs center terminal) is now lost to the municipal sewage system

I surely havent had much luck with this Russian. I understand its (mostly) parts compatible with a Kayfun Lite Plus, but Ive seen mentions that certain parts arent the same, and ive also read comments where the wrong part was sent.

Do any of you have a link to a vendor thats quick (note: this by definition excludes "Fasttech" ) who you know for sure has the right part? I just want to make sure I order the right one; dont care if its 99 cents or 4 dollars.

Hopefully after I get that my thorough cleaning/soaking will have fixed my wicking problem.

Well, its prolly in your trap..

 

[sando7]

..........@ jandry, fatdaddy has what you need
SHOP - FatDaddyVapes.com - Home of the best vape tweaks and replacement hardware.

 

[duckfan55]

Hey all,I just got the mvp2 and I bought the iclear 30 s tank last week, and im a heavy vapor, about how long should the coil last before I change it? I get a burnt taste once in awhile but the coil was just changed 3 days ago, is it possible that im vaping so much that im going through the coils that fast?

 

[sando7]

some coils last for weeks and some for days and some only a couple of hours......it's the draw of lady luck and if they were made on a monday or a friday......best thing to do is to learn to wrap your own

 

[Midniteoyl]

You're chain vaping and drying the wick... Slow down, or get a bottom coil tank

 

[duckfan55]

what are good bottom coil tanks?

 

[jakematic]

what are good bottom coil tanks?

Nautilus Mini BVC are my new favorite BCC.

 

[sando7]

Aspire BDC - Steel Nova
http://www.v-ecigs.com/aspire-bdc-replacement-coil-1-8ohm/

carto tanks are also excellent on the MVP, very good flavor & the closest taste you'll get to dripping without actually dripping

http://www.hoosierecig.com/Smok-Tech-UDCT-locking-one-piece-cartomizer-tank_p_375.html

 

[DavidAmonettNashville]

Note to self: never try completely dissassembling an RBA next to the kitchen sink, especially with the water running.

I screwed up guys. I had some time today and decided to completely take apart the Russian 91% to see if I could find any problems with it. Unfortunately the plastic isolator rectangle under the center metal block (which is secured by the screw that contacts the MVPs center terminal) is now lost to the municipal sewage system

I surely havent had much luck with this Russian. I understand its (mostly) parts compatible with a Kayfun Lite Plus, but Ive seen mentions that certain parts arent the same, and ive also read comments where the wrong part was sent.

Do any of you have a link to a vendor thats quick (note: this by definition excludes "Fasttech" ) who you know for sure has the right part? I just want to make sure I order the right one; dont care if its 99 cents or 4 dollars.

Hopefully after I get that my thorough cleaning/soaking will have fixed my wicking problem.

This may help...​

​

 

[DavidAmonettNashville]

Nautilus Mini BVC are my new favorite BCC.

Ditto on the BVC