Yup, I was Tootle Puffin the Lemo today in the hospital parking lot waiting for my wife to get finished with some tests. Nobody saw a thing
It's all good ckquatt
Join the Army Subasidal tendencies
- Thread starter SissySpike
- Start date
- th_trl_thread_readers 0
- Status
Yup, I was Tootle Puffin the Lemo today in the hospital parking lot waiting for my wife to get finished with some tests. Nobody saw a thing
It's all good ckquatt
Ok I scoped the dna 40 and SX both are very nice mods and well regulated I was disappointed to see the SX uses PWM in Temp mode. I guess the Chinese just can't get away from it. But when I compared it to a Vamo 1 the PWM looked alot better. So there is that. I wish we could combine the two mods and have a awesome one instead of just two very good ones
But I guess we are just starting out and things will get better.
I used the Lemo 2 all day layed it on its side lots filled it several time no leaks Wahoo!!! Im very happy with it
But I guess we are just starting out and things will get better.
I used the Lemo 2 all day layed it on its side lots filled it several time no leaks Wahoo!!! Im very happy with it
yeah it is still new, give it time, look how long it took to get reliable vv devices most could afford
Might be just me, but what's wrong with PWM Buzzz? I've had a coupe of 33 Hz mods over the years and that never bothered me. What frequency did you get from the SX? Might have given me a bit more TH compared to a mech mod at the same power level (which is good for me considering I don't vape much nic), but it wasn't anything that irritated me at the time
Good to hear the Lemo 2 doesn't flood on its side. I had my Lemo 1 on its side for an hour today while working in the yard. It only leaked a few drops and I was able to vape that up without having to flush it out. Not too bad
Honestly I didnt pay any attention to the freq just looked at the waves Its probably just me being .... plus PWM is not a very efficent way to regulate but I did not here or feel it pulsing when I vaped Im jaded twords PWM from the ZMax Vamo days, but the voltage was accurate with in a tenth of a volt in Temp and a hundredth when in VWMight be just me, but what's wrong with PWM Buzzz? I've had a coupe of 33 Hz mods over the years and that never bothered me. What frequency did you get from the SX? Might have given me a bit more TH compared to a mech mod at the same power level (which is good for me considering I don't vape much nic), but it wasn't anything that irritated me at the time
Good to hear the Lemo 2 doesn't flood on its side. I had my Lemo 1 on its side for an hour today while working in the yard. It only leaked a few drops and I was able to vape that up without having to flush it out. Not too bad
I was able to Make the SX buzz if I put it in Temp mode whit Kanthel in the atty. I dont see that as a glitch cause you ant supposed to do it.
I dont completely understand Joules and what the joules counter is telling me. I read the explanation on the YiHi sight I just dont get what is vaped consumed? I dont think 1 J = 1W because The J will not go as high as the W dont get me wrong I think all in all The YiHi is batter then the DNA if for no other reason I can get upgrades for free and I have to pay 60$ from DNA and solder a new board in.
My Cthulhu shipped yesterday I have high hopes for that tank.
Very true we will get there, The good thing about YiHi and DNA both being there is good honest competition. You will see that the clone DNA 40 is ok and dose work but it just falls short a little when compared to to the legit DNA IMO. But hay for less than half the price its not a bad deal.
Thats true I was going to put in a spring loaded 510 but I never got a allen wrench small enough to take it apart. The clone did not screen glitch like the DNA dose. The most noticeable thing I found was the lag from when you pressed the button. But as I keep saying for the price range I was very happy with the clone Dual bettery life is great also over the single bat DNAs I have.
Actually to me, not having a spring loaded pin is a plus. I get people like the spring loaded, but I honestly have to laugh, we hated the unsealed stick batteries, warned people away from them because of the problems if they got juice in there, and now we support products that because of the spring loaded pin are once again unsealed. I honestly feel that is why we are starting to see problems from the isticks. As to the delay, well being use to mechs, I hit the button before I get it to my lips anyways lol, ya know old school mech mod use
Last edited:
I've had the same thought Nancy. Both the Sigelei and Vapor Shark have sprung pins and I'm always Q-tipping them trying to keep juice out of there. It sure is convenient to be able to just screw any atty on and have it sit on the mod, which I think makes it a bit more robust if I drop one. I'm hoping the connections are well designed with an O-ring seal in it. I'm not aware of anyone having any issues with these connectors either which is why I bought them. Time will tell I guess
Thanks Roxy. That explains everything!A joule is a measure of work. 1J = 1W/s.
That probably doesn't help
Ahhh its related to work, that's why I don't understand it
That whole work thing is highly overrated.
The only time I have gotten good results from quad coils is in rbas with 4 separate airholes
That whole work thing is highly overrated.
The only time I have gotten good results from quad coils is in rbas with 4 separate airholes
A joule is a measure of work. 1J = 1W/s.
That probably doesn't help
and its work trying to figure out how Joules is doing anything but causing a thin spot in my hair from all of the scratching
The floating 510 do have a O ring and they seal cause Ive most defiantly have had some leaks Now having installed a couple if you dont get your wire soldered in the pin straight Im betting it will end up leaking cause it will not be straight and wont make a good seal. Its not that hard to do but you do have to put a little effort in to getting it right.
I went canoeing in WV this weekend had a great time! I took the Lemo 2 and no leaking issues even when I went threw some elevation changes enough to make my ears pop at a safe and sound 80mph
I did not take it on the canoe with me I dont trust it enough yet to make it my go to tank but its getting there.
I went canoeing in WV this weekend had a great time! I took the Lemo 2 and no leaking issues even when I went threw some elevation changes enough to make my ears pop at a safe and sound 80mph
I did not take it on the canoe with me I dont trust it enough yet to make it my go to tank but its getting there.
I have to agree with this. Ive had some pretty bad leaks on my 100+ and havent had a lick of trouble from it.
Some spring loaded 510s are sealed. The FDV ones are.
However, I know the makers of the clone flasks were having trouble getting a steady connection using one. So it may not work well with that chip.
Well, joules are directly related to watts, but as a measure of work, its over a period of time. For our purposes, consider them the same.
Work is always measured over time or distance. If you lift a 50lb object for 10 seconds, you did more work than if you only lifted it for 3seconds. Same if you lift it 5 feet, you did more work than if you lifted it 2 feet.
However, I know the makers of the clone flasks were having trouble getting a steady connection using one. So it may not work well with that chip.
Well, joules are directly related to watts, but as a measure of work, its over a period of time. For our purposes, consider them the same.
Work is always measured over time or distance. If you lift a 50lb object for 10 seconds, you did more work than if you only lifted it for 3seconds. Same if you lift it 5 feet, you did more work than if you lifted it 2 feet.
I bet you would adjust very quickly
. I do really love my sx mini m class.When we started vaping we all adjusted to volts and watts. Even with my strong electronics background I still had to adjust to how they applied to vaping. About all that was easier for me is that I already knew Ohm's Law and the Power Law upside down and backwards. Otherwise I was pretty clueless a year ago. I didn't even know which was the 510 connection and which was the ego threading, lol! I was reading about clearos as opposed to the ego t atomizers and had no idea if they would connect to my ego batteries or not
I had no clue what the rebuildables were I saw when I was looking at "atomizers". I didn't even realize I was looking at clones. I think when I bought my first one I didn't realize at first it was a clone. I thought they were all very reasonably priced, and about the same price as my Aerotanks, lol!
I bet you would adjust very quickly
When we started vaping we all adjusted to volts and watts. Even with my strong electronics background I still had to adjust to how they applied to vaping. About all that was easier for me is that I already knew Ohm's Law and the Power Law upside down and backwards. Otherwise I was pretty clueless a year ago. I didn't even know which was the 510 connection and which was the ego threading, lol! I was reading about clearos as opposed to the ego t atomizers and had no idea if they would connect to my ego batteries or not
Man wouldn't it be nice if they where all reasonably priced, I would gladly pick up a few I really want if they were. I own a couple clones at this point, but I hate that the even copy the logos, but I can't afford to even lay out the $80 for a tugboat out a lone what some of these sell for.
- Status
Similar threads
- Locked
