Laser Prototype Beta Testing in progress...

[Thyestean]

here are the sample colors that WW sent us! The first 2 are reflective so it was hard for me to get a good picture of them, but the end on is a shiny gold and the 2nd one in is a shiny silver (chrome) let us know what you think!

wow look at all the purty colors

And here is one I found for TMB. We have some of this left over from a special job we did. I stole the pic from an eBay listing LOL because this stuff is impossible to get a pic of. It's multi-lens or also called defractolens and it is hot pink.

Now I have to go back to bed LOL Just took more pain meds and if I don't lay down, in about 20 minutes I'll just fall down. I'll be back later tonight

Have a great one!!

that's it. right there. that's the color Iken should dye his hair once it grows out a bit more

feel better WW!

 

[TBM]

Witchway big hugs I hope you feel better!

I LOVED IT WW THAT WILL BE MINE IT IS SOOOOO PERFECT!!!!!

 

[stubear62]

Oh let me help there LOL I have a color chart of our colors

And I found something special just for TMB I'll be on later, I just happen to see your message and jumped on to put up the color chart.

I'm so happy you like the car decals. Let me know if you want to stay with those the way they are or make changes.

I like the Purple and Lavender..oh, and the teal too...
Umm, Isaac..
When do you want our reviews???

 

[Iken]

WWAY!!!!!!!!! Just beautiful beautiful beautiful beautiful beautiful beautiful beautiful beautiful beautiful beautiful beautiful beautiful beautiful Beeeauuuuuuuutiful! Thank you soo much! The Vinyls are just...well beautiful! The decals in the Monotype corsiva were just grand and great ideas! We hav to do this for sure!


You guys really Have to see these in person! The colors are so vibrant a normal camera and pc monitor simply cannot capture it!

wow look at all the purty colors





that's it. right there. that's the color Iken should dye his hair once it grows out a bit more

LOL Awwww but I wanted blue!!! Besides our lovely Tink has Pink hair!

I like the Purple and Lavender..oh, and the teal too...
Umm, Isaac..
When do you want our reviews???

Stu! There you are! I thought you had abandoned us! Please tell us your results my good man.

 

[stubear62]

Okay, as my 2 weeks are almost up (tomorrow will be 2 weeks) I just want tosay that this LPV2 is a GREAT little Vaporiser.
I know the others are liking this a lot but I love it and there is just 2 things that concern me. First is the threads. Very jittery / feeling like they will sieze together unless you put naolox or oil on them and maybe a bit too thin for the threading too.
I also didn't know how the battery went in, as always, I put the positive side towards the front (light, top). I then noticed the spring in the top section and asked how the batt went in. I was told either way. The negative side first and the LED works, the positive side first and the LED doesn't work. But you can vape either way the battery is in.
That is really the only 2 problems that I've had, being the threaded cap is the most concern for me. The button has never failed and I play with it a lot. Like clicking a pen. LOL
The paint on mine was fully cured and very nice job too on the painting. All in all I think this should be on the site for sale and in more colors. And fix the threaded cap too. The way the battery goes in doesn't matter. Maybe a piece of paper or instructions to allow (in my case a "new" LPV user) others to know the correct way. I used protected batts and only 1 out of 3 was tight where I needed to turn it to find the loosest way that the batt would fit inside.
This concludes my Beta Testing of the LPV2 for IkenVape.

 

[theECB]

Looks awesome! I want!!!

 

[MrsIken]

Looks awesome! I want!!!

hey ecb! which color is your favorite?

 

[WitchWay]

AWWW!! I hope you're feeling better!! Stop working so hard and take care of yourself!

Thank you Val! Actually I have been taking it easy for the last two days and the back is doing better. I'm sitting here in this full torso back support corsette that is just so much fun to wear. It does keep your back from moving and if you wear it long enough it gives you one hell of a nice waist line. So it's not all bad.

feel better WW!

Thank you Thy!

Witchway big hugs I hope you feel better!

I LOVED IT WW THAT WILL BE MINE IT IS SOOOOO PERFECT!!!!!

Thank you TBM! Do you have the original lazer or are you wanting this for one of the new lazers? So I can make sure to get the right cut for you I just knew you would like that vinyl

WWAY!!!!!!!!! Just beautiful beautiful beautiful beautiful beautiful beautiful beautiful beautiful beautiful beautiful beautiful beautiful beautiful Beeeauuuuuuuutiful! Thank you soo much! The Vinyls are just...well beautiful! The decals in the Monotype corsiva were just grand and great ideas! We hav to do this for sure!


You guys really Have to see these in person! The colors are so vibrant a normal camera and pc monitor simply cannot capture it!

We are placing a vinyl order tomorrow so I'm going to get a small amount of carbon fiber, mossy oak camo and possibly some color changing vinyl to go with the solid colors to start. Should have that vinyl midweek. I plan on perfecting the templates for the LPV1 and LPV2 this weekend, as long as the back holds out. If all goes well by the end of next week I should be able to get a small batch of covers off in the mail to you so we can get this ball rolling!

Ok now the important question... on the IkenVape car decals... Chrome or White vinyl? Or something else.

And just to keep on topic... 10 days with my LPV2 and I'm lovin it!!! I forgot all about the light inside LOL I haven't taken my atty off for days. Absolutely no more problems since I put the Noalox on the threads. Matter of fact I'm not even careful anymore when taking the battery cap off and on. It comes off and goes on so easy now I don't even think about it.

Happy Vaping!!!!

 

[whiskey]

Okay, as my 2 weeks are almost up (tomorrow will be 2 weeks) I just want tosay that this LPV2 is a GREAT little Vaporiser.
I know the others are liking this a lot but I love it and there is just 2 things that concern me. First is the threads. Very jittery / feeling like they will sieze together unless you put naolox or oil on them and maybe a bit too thin for the threading too.
I also didn't know how the battery went in, as always, I put the positive side towards the front (light, top). I then noticed the spring in the top section and asked how the batt went in. I was told either way. The negative side first and the LED works, the positive side first and the LED doesn't work. But you can vape either way the battery is in.
That is really the only 2 problems that I've had, being the threaded cap is the most concern for me. The button has never failed and I play with it a lot. Like clicking a pen. LOL
The paint on mine was fully cured and very nice job too on the painting. All in all I think this should be on the site for sale and in more colors. And fix the threaded cap too. The way the battery goes in doesn't matter. Maybe a piece of paper or instructions to allow (in my case a "new" LPV user) others to know the correct way. I used protected batts and only 1 out of 3 was tight where I needed to turn it to find the loosest way that the batt would fit inside.
This concludes my Beta Testing of the LPV2 for IkenVape.

Stu...You Just Wrote My Review!!!! Thanks Bud I Can't Possibly Say It Any Better...Hey Isaac...I am Cheating And Just Cut & Paste Stu's Review(End Cap Thread Change Most Important IMO)
Ha Ha Ha...As Far As The Colors WW & Mrs Iken Walaaaaaaaa Perfection
Can't Wait No No No Can't Wait!!!!!!!!!!!
Put Me On The List For One In Teal!!!!!Thanks Isaac For Asking Me To Test This
You Have A Winner & My Vote!!

 

[Wench]

Oh how cool! Don't forget the Chameleons for the colors!
How about a leopard print or some pearlized colors too?
Another idea that would be cool and make your pv totally custom is decal's you could put on the base vinyl (ie. skull and crossbones, letters, stars, hearts etc etc)

 

[Thyestean]

LOL Awwww but I wanted blue!!! Besides our lovely Tink has Pink hair!

lol

------------


Okay unfortunately, 11 days in, I have run into my first "issue" with the Midnight Lazer. I realized last night that the threads on mine (inside the tube) have actually worn down to the point where I am "dropping" the end cap in halfway or more before actually threading it into the tube.

I have been wiping the threads off almost every time I take the endcap off and haven't been forcing it on. However there have been times where it has been a little "sticky" when putting it back on and I proceeded to carefully thread it in anyways.

Since noone else has mentioned having this issue I assume that it probably has to do with my lack of getting out and buying some Noalox to put on the threads.

Add to that the fact that I had one 10440 battery die on me last night. That has nothing to do with the unit though.

So I am going to set the Midnight Lazer aside for now, because I do love the way this little thing looks and feels and the fact it has performed flawlessly, and wait until I get out and get some Noalox so I don't kill off the rest of the threads and will be able to continue to use it in the future.

Thanks again Isaac for including me in this testing phase.

 

[TBM]

WW I have the LP1 but I am getting the LP2 when he gets them in so that pretty pink can be made for either of them whichever is easier for you. Thankies!!!

 

[maureengill]

And here is one I found for TMB. We have some of this left over from a special job we did. I stole the pic from an eBay listing LOL because this stuff is impossible to get a pic of. It's multi-lens or also called defractolens and it is hot pink.

Now I have to go back to bed LOL Just took more pain meds and if I don't lay down, in about 20 minutes I'll just fall down. I'll be back later tonight

Have a great one!!

OMG...I LOVE THAT COLOR...must...have...one...in...THAT...COLOR....

Maureen

 

[stubear62]

Here is the video for all to see...

YouTube - Beta Tested the LPV2 from www.ikenvape.com.wmv

Remember, this is my HO for the new LPV2. Enjoy everyone!!

 

[whiskey]

Good Review Stu...Just That You Couldn't See All The Time What Your Hands Were Doing Below The Frame Line Of The Camera.But You Hit The Points Perfect On The LPV2.Good Job!!!

 

[stubear62]

Yeah, I noticed that too. By the time I was done, either the phone ringing or my dogs barking and someone at the door. It took, 5 times and by then I was like.. Man am I ever going to get this done. LOL

 

[MrsIken]

great review stu!!

 

[HzG8rGrl]

lol

------------


Okay unfortunately, 11 days in, I have run into my first "issue" with the Midnight Lazer. I realized last night that the threads on mine (inside the tube) have actually worn down to the point where I am "dropping" the end cap in halfway or more before actually threading it into the tube.

I have been wiping the threads off almost every time I take the endcap off and haven't been forcing it on. However there have been times where it has been a little "sticky" when putting it back on and I proceeded to carefully thread it in anyways.

Since noone else has mentioned having this issue I assume that it probably has to do with my lack of getting out and buying some Noalox to put on the threads.

Add to that the fact that I had one 10440 battery die on me last night. That has nothing to do with the unit though.

So I am going to set the Midnight Lazer aside for now, because I do love the way this little thing looks and feels and the fact it has performed flawlessly, and wait until I get out and get some Noalox so I don't kill off the rest of the threads and will be able to continue to use it in the future.

Thanks again Isaac for including me in this testing phase.

PM'ed ya!...............

 

[rosesense]

Nice review, Stu.

Bought the LPV1 off the classifieds (since Iken is out) and I wanted to compare to the LPV2. I like them both but the 1 is sturdier and I really like the shape of it. Still loving the 2 but I agree with the post above about the threads. I am afraid they will get messed up and I wish the threads could be better so I would know this would hold up for awhile. Actually, the threads seem thin on both models. I think that is the only thing that needs improvement.

 

[stubear62]

Why, TY Very Much MrsIkenmoke!!
TY rosesense and Wiskey!!
That means a lot to me.
I know I do try my best to help all the new people to go to the right suppliers for either liquid or PV's. Thats all I want to do, help others. Specially the new people, it really gives me the greatest feeling that I have helpped others out and that means a lot.
Again, TY to all.
Stu