Merged old Janty eGo sticky threads

Status
Not open for further replies.

Mik_Janty

Ultra Member
ECF Veteran
Aug 23, 2009
1,665
14
Denmark
Hey

Thats good to hear, im glad you like it.

As for the atomizer cover - when these things are produced there are some tolerance shifts, - i havent had this problem you mention, nor do i see it happening with the 10 units i have- however, it COULD be that you have one of those that "slipped" by, and have a smaller tolerance - and then you drop it which ofcourse enhances that problem.

My suggestion would be to clean both connectors, - the cover and the eGo, thoroughly, to ensure no dirt/metal fragments are caught. If you have dropped it, it could very well have chipped a bit, and that could be why it feels stuck when you screw it in.

I hope this helps, and that i perceived your problem correctly!
 

Mik_Janty

Ultra Member
ECF Veteran
Aug 23, 2009
1,665
14
Denmark
Thank you Mik(e)? for such a quick response.
There is no problem at the bottom, threaded end.
The other end has been dented, and touches carts and this top end leaves marks on the cart's outer surface.

Aaah.. i understand better now.

You could contact your local shop and ask them about the price for a replacement cover?

And no, it is Mik ;)
 
Last edited:

Mik_Janty

Ultra Member
ECF Veteran
Aug 23, 2009
1,665
14
Denmark
Just a bit of clarity:

the batteries are 650 mAH, and yes we do have our own secret battery technology. And no, you may not know what it is. No. Not even if you attempt to bribe with muffins (but please try).

And.. ofcourse we design our stuff to look great in public - we want you to quit those killer analogs in style ;)

/Mik
 

Kelemvor

Ultra Member
ECF Veteran
Apr 12, 2009
1,182
34
Germany NRW
I was a little worried with only 600mah compared to the mah rating on batteries for mods.

90% of the standard li-ion batteries are 30% overrated by the manufacturer.

the 10440 the jantystick uses is 320mAh, but ultrafires and trustfires and some others rate them 500mAh or 600mAh, which is a real joke, they vape not a single minute longer than the ones janty sells.

the same goes for 3000mAh 18650 which in reality have a big capacity of real 1900mAh.
 

deewal

Super Member
ECF Veteran
Aug 30, 2008
692
3
78
In a house.
I'd just like to quote you on something you wrote in another thread Mik.

My personal agenda is not 3.7 or higher, it is simply making it good enough. Think about it - analogue cigarettes does NOT taste good compared to e-cigs. However, e-cigs sometimes fail at delivering the nicotine in a way so you "trust" it - thats the area i feel should be improved.

I can honestly say that right now with the long lasting life of the tesla filter, AND the eGos battery i am set. I will not say that doing for instance a 4.5 volt eGo or something, wouldnt make that better - but i think we need to take these things one step at a time - instead of boosting the voltage, we need to make the ones that are the most standard, and safe, work as near to perfect as we can.

I personally feel that Janty have done that with the Kissbox Classic. I have no problem buying new Battery's because they are powerfull and reliable.The separate switches are very unique also. I "trust them".
If the Baby J could be the next natural upgrade to the Kissbox with longer lasting Battery's ( even if they are disposable ) i would be completely happy with that.
I think your personal agenda is very commendable.
Please don't abandon us Penstyle Lovers. :)
 

Mik_Janty

Ultra Member
ECF Veteran
Aug 23, 2009
1,665
14
Denmark
I'd just like to quote you on something you wrote in another thread Mik.



I personally feel that Janty have done that with the Kissbox Classic. I have no problem buying new Battery's because they are powerfull and reliable.The separate switches are very unique also. I "trust them".
If the Baby J could be the next natural upgrade to the Kissbox with longer lasting Battery's ( even if they are disposable ) i would be completely happy with that.
I think your personal agenda is very commendable.
Please don't abandon us Penstyle Lovers. :)

I am a penstyle lover myself, so dont worry =)

I had to break my Baby J prototype last night in order to help figure out an issue for the factory.. and i almost cried. Poor thing. Now i have to fix it later tonight.. and i am anti-chinese when it comes to soldering.. *sigh*
 

chuaa

Senior Member
ECF Veteran
Sep 4, 2009
77
0
been using my ego for 2 days now...still on my first bat!!! wow...absolutely great!

one question though.....how do you know that its running out of power? does it just go dead all of a sudden (as in no more white light when you push the button)...or will it give some sort of warning signal...

i dont know whether to bring the extra batt along with me or not (when i go out...)....biggest fear now is that i dont bring along the extra batt and power runs out..as it is, am quite comfortable just bringing the ego (without any other device or accessory..)
 
Status
Not open for further replies.

Users who are viewing this thread