No, I don't think it wasn't the atties that were causing the problem, because I tried a few different ones out, and still had the battery overheating like that. I also don't use the cone, so I am pretty well aware of the temperature of the atomizer. The battery was simply at the end of it's life, as it wasn't performing well (weak vapor, a lot of effort etc), even with a a number of different atomizers.
- Status
Or the atomizer damaged the battery, so that when you tried different atomizers on it, it - because it was damaged - kept on malfunctioning?
Lots of possibilities im afraid, and fact of the matter is that a bad atomizer can kill your battery!
Ok I know a production designer is here sometimes.........
I want a 5V eGo like PV!!!!!!
I'm sure others would buy it as well.
I want a 5V eGo like PV!!!!!!
I'm sure others would buy it as well.
Last edited:
Put a USB/mini USB female adapter on the end of the case (ala Baby J) for 5v passthru/charging purposes and we'll have a product that, I believe, would be pretty hard to beat. Or.....I would be extremely happy just to have my very own 4.5v Baby J....
Likewise ... +1
Im not throwing me cash at some flashlight tube painted funny by some geek and priced at 111 $ for as long as idiots keep on buying them.
The only worst thing than that is ppl selling 'high quality cables', that go for 5 $ per meter, patched with a 2 $ atty specific connector at the super duper bargain price of *just* 59.99 $.
Its about time some serious company ends this birthday party here and now.
Good thing TW has started taking things more seriously and they now sell SD at a more fair price.
Im not throwing me cash at some flashlight tube painted funny by some geek and priced at 111 $ for as long as idiots keep on buying them.
The only worst thing than that is ppl selling 'high quality cables', that go for 5 $ per meter, patched with a 2 $ atty specific connector at the super duper bargain price of *just* 59.99 $.
Its about time some serious company ends this birthday party here and now.
Good thing TW has started taking things more seriously and they now sell SD at a more fair price.
i just wanted to make sure that my information is correct in this...in my area we are currently organizing a trip to inform the public on PV's here in Williamsburg Virginia at Busch Gardens. is the joye ego from www.goodprophets.com the same as the janty ego? from what i understand joye is the manufacturer, but i just wanted to make sure my information was correct. i was sitting at starbucks vaping away and had someone talk to me about them, i recommended both the KR808d-1 from V4L because they have treated me great over my whole transition, but that i had always heard good things from janty and they found that site while we were sitting there and asked me...i did tell him it was the same because i thought that the same people manufacture them, i just wanted to make sure so that if i was mistaken, i could get in touch with the guy to correct myself. i appreciate any info you are able to provide as always. if you live in Virginia and would like to participate in this activity we are planning send me a message and i'll get you all the info. thanks guys
Man I'd love an excuse to go to Busch Gardens! Last time we went during Halloween and it was awesome. Even talked my wife into going up on some of the more insane coasters!
Anyway, this is a question I wonder about to. Both are eGo, both look exactly the same.. Are the Janty re-branded? Or is the Joye re-branded?
Anyway, this is a question I wonder about to. Both are eGo, both look exactly the same.. Are the Janty re-branded? Or is the Joye re-branded?
Alex is correct.
We designed them, Joye manufactures them for us - they sell their "own" Joye eGo, which is the same as ours, but ofcourse without the support from Janty - and ofcourse it is not a Janty, which to some people means more than saving a few bucks
We designed them, Joye manufactures them for us - they sell their "own" Joye eGo, which is the same as ours, but ofcourse without the support from Janty - and ofcourse it is not a Janty, which to some people means more than saving a few bucks
Hey guys,
Yes i am reading here
But there are alot of "issues" with 5v - im not saying we wont make them, but we think the solution of low resistance atomizers are better than that of adding more voltage for several reasons.
So if you have not tried a low resistance atomizer yet, i strongly urge you to go and try one; who knows, it might be just enough for you!
Yes i am reading here
But there are alot of "issues" with 5v - im not saying we wont make them, but we think the solution of low resistance atomizers are better than that of adding more voltage for several reasons.
So if you have not tried a low resistance atomizer yet, i strongly urge you to go and try one; who knows, it might be just enough for you!
Id suggest LR attys also.. You can get the equivalent vape from this type of setup and save money also.
The Janty eGo and the Joye ego are the same product to a certain extent; The main difference lies in the support and warranty - and ofcourse in the support; By buying Janty, you are supporting that we continue to design and develop new e-cigarettes, by buying Joye, you are also supporting Janty, just not as much!
I hope that makes sense
I hope that makes sense
JoyE is the OEM for all the eGos out there regardless of name. Of course Janty has the janty warranty.
... of course.That is, for the ones that are actually eGos, and not clones/copies ofcourse
Hey all, we've got black manual eGo sets back in stock as well as the following:
Dura-eGo atomizers, regular and TAWA
- TAWA available individually or in 5 PACKS!
LR Atomizers still in stock, also available in 5 packs or individually.
Just wanted to stop by for a quick update.
Have a great weekend everyone!
Ethan
Dura-eGo atomizers, regular and TAWA
- TAWA available individually or in 5 PACKS!
LR Atomizers still in stock, also available in 5 packs or individually.
Just wanted to stop by for a quick update.
Have a great weekend everyone!
Ethan
I bought my Ego 5 weeks ago. Love the unit functionally. No problems there. And it looked great when I got it. "Titanium" color.
The trouble is that after vaping for 5 weeks, the cone and BOTH bats had significant splotchy areas where the paint had pealed off and the unit looked horrible. It looked so bad that I had to use my fingernails to remove all the remaining paint. I now have a stainless steal color and it looks fine. Any replacement bats I buy will be stainless steel because I understand that "color" has no finish.
However, I'd like to point out that I have never dropped the unit on the ground. The paint appears to be pealing due to oil on my skin transferring to the coated metal surface. And occasionally a little e-liquid, which seems to really accelerate the process of de-bonding the paint.
It strikes me that this problem is inevitable with these units. It may happen sooner or later for a given individual, but it's going to happen because no one can avoid touching the cone and bats. It's too bad because the unit looks nice on delivery, and I think that people should be able to choose a preferred color and have it continue to look that way for the functional life of the unit.
I don't know if the manufacturer could use a better bonding paint or if this problem can't be avoided because metal surfaces just make it inevitable regardless of the paint used. In any event, unless or until the problem is addressed, I would tend to recommend that people just get the stainless steel (i.e. the unfinished) version because that's how it's going to end up sooner or later and it looks pretty awful while in transition.
- wolf
The trouble is that after vaping for 5 weeks, the cone and BOTH bats had significant splotchy areas where the paint had pealed off and the unit looked horrible. It looked so bad that I had to use my fingernails to remove all the remaining paint. I now have a stainless steal color and it looks fine. Any replacement bats I buy will be stainless steel because I understand that "color" has no finish.
However, I'd like to point out that I have never dropped the unit on the ground. The paint appears to be pealing due to oil on my skin transferring to the coated metal surface. And occasionally a little e-liquid, which seems to really accelerate the process of de-bonding the paint.
It strikes me that this problem is inevitable with these units. It may happen sooner or later for a given individual, but it's going to happen because no one can avoid touching the cone and bats. It's too bad because the unit looks nice on delivery, and I think that people should be able to choose a preferred color and have it continue to look that way for the functional life of the unit.
I don't know if the manufacturer could use a better bonding paint or if this problem can't be avoided because metal surfaces just make it inevitable regardless of the paint used. In any event, unless or until the problem is addressed, I would tend to recommend that people just get the stainless steel (i.e. the unfinished) version because that's how it's going to end up sooner or later and it looks pretty awful while in transition.
- wolf
- Status
