I wish I had the box. This stupid vendor unboxed it and sent the contents so it would fit in a smaller package, I'll never use them again.
MVP Owners Group-into the next generation
- Thread starter pufZeppelin
- Start date
- th_trl_thread_readers 0
- Status
That is innokin's new logo.
We have yet to see a single non-legit MVP reported or pictured. They don't exist, at least right now.
This is a rather slimy ploy by Innokin to control prices and force people to buy only from the dealers that
innokin has "approved". Frankly, it is a crappy way of doing business and I think if they tried to do that
with a US based company they would be hit with a fine or a law suit.
Edit: If you want to read more on this price fixing by Innokin, google Smokey Joes blog "Dirty Little Not So Secret." For some reason I can't link it on ECF.
Last edited:
Think I am going to take the plunge and order something from slowtech maybe a new mod and new tank lol thinking a vv v3 not sure which tank tho.. Gonna use them cos it's stupidly cheap as I am in the uk I mean vv vw v3 is £15 that's 7 or 8 pound cheaper than I have seen it elsewhere
Has anybody had a look at the itaste DRV... What next, when do I stop spending.
hello and welcome to the MVP owners thread...
seems the crowd is about 50%/50% concerning the i30
I am on the nay side, just didnt care for it
plastic, 510 threads, dual coils, and ALL those wicks
it didnt hit well enuff for me
have to admit I didnt give it a prolonged test run, but I ran it
enuff that it got passed on to another vaper & I never gave it another thought
I had many other tanks that far out performed it at the time
but it sounds if you're one who gets along with it, and that's a good thing
I've been trying to give the Iclear i30 a chance. The taste and vapor are great from this tank, but I learned right away it can not be turned upside down or the juice flows from the tip. Also, it slowly drips from the area that touches the battery. Like actually drips slowly. Last night, I left it on my MVP overnight for the first time and when I woke up, the beauty ring was leaking my juice all over the MVP. It slowly dripped out all night and the top and sides of my MVP were covered and slippery from the juice leaking all night. I've made sure the coil is screwed in tight and everything checks out, but it drips from the bottom constantly. Took awhile to clean it all out. I think I will toss this tank since my Nautilus' and Aspire BDC tanks are much less finicky.
- Dec 18, 2013
- 2,946
- 56,640
- 79
I don't have that problem, bigdude. Upside down doesn't leak for me. Don't really store it upside down but a full tank laying on the desk all day doesn't leak. As far as seeping down on the contact pin... don't have a tank that doesn't to some extent no matter what the brand. So it sounds like something is wrong with the tank but I can't imagine what. And yeah... flavor and clouds are really hard to beat with them.
I was going to wait until a MVP 3 comes out but of course I couldn't do it so I ordered my first box mod ever - the MVP 2.
I figure I'll get the 3 if and when it comes out. I am pretty excited since it should arrive today or tomorrow.
In other words: A new MVP user introducing himself.
welcome & hello
nice to have ya aboard
so you're the second one now that I've heard has the "NEW" Innokin logo
on their MVP
guess you have one hot off the press (nice)
yepper, if you wait for technology you'll die with your boots on
at least you know your not making a bad purchase/choice
if the next generation MVP is just so mind blowing awesome-astonishing-extraordinary-phenomenal
you can get one of those also...
DRV- seems interesting but way to pricey$ in my mind
and I have heard it just doesnt work well
do your homework before you buy
maybe a better choice
- https://www.myfreedomsmokes.com/batteries-chargers/usb-passthrough/usb-vv-passthrough.html
- https://www.myfreedomsmokes.com/bat...ut-universal-car-charger-plug-w-usb-port.html
me spending your money
- VAMO 5 Sidewinder - Stainless MOD APV Variable Voltage Variable Wattage
- Rocket Mod, Stainless
- Genuine Fogger Atty v4.1 Rebuildable Tank Atomizer (RBA) by Yi Loong
- Dovpo E-LVT Firestone Waterproof Vape Mod Kit $39.99
the only way it can get out is
the o-ring on the base as to seal the coil on (make sure it's there)
but it exits out the wick tube, down the coil shaft, then out to the battery
so it's why they preach DON'T OVERFILL
then allowing it to sit on its side too long
oversaturates wicks, then in turn if you don't burn it off
excess again drips down coil shaft, onto battery
another possibility is the tank itself is NOT SEALED
thus not maintaining a vacuum which allows juice to flow freely out...
JMO
Nah I dont but I dont have any errors lol I've rebuilt 6 PT2 coils. They all are 1.3 I dont need them yet still on the first coil. Only reworked twice in the last month. But I have others ready in case I need em.
youre kinda blending TWO DIFF PROBLEMS together
>one is an electrical snafu
>youre describing a contact / connection sorta trouble
- https://www.myfreedomsmokes.com/parts-accessories/adapter-male-510-to-ego-thread.html
- http://www.madvapes.com/circuit-board-spacer.html?acc=70efdf2ec9b086079795c442636b55fb
the only way it can get out is
the o-ring on the base as to seal the coil on (make sure it's there)
but it exits out the wick tube, down the coil shaft, then out to the battery
so it's why they preach DON'T OVERFILL
then allowing it to sit on its side too long
oversaturates wicks, then in turn if you don't burn it off
excess again drips down coil shaft, onto battery
another possibility is the tank itself is NOT SEALED
thus not maintaining a vacuum which allows juice to flow freely out...
JMO
The tank will literally empty in a second or two if I turn it upside down. The juice pours out in a stream. If I fill it up to 2ml and leave it for the night, it will maybe have 1ml left in the morning from leaking out the bottom pin. Maybe I got a bum tank? Everything is tightened down so I have no idea. I could leave my nautilus tanks or my Aspire BDC tanks alone for days and have never had a puddle of juice.
Agreed, way to costly when one can use a pass though. Still its does have the cool factor going for it.DRV- seems interesting but way to pricey$ in my mind
and I have heard it just doesnt work well
do your homework before you buy
maybe a better choice
- https://www.myfreedomsmokes.com/batteries-chargers/usb-passthrough/usb-vv-passthrough.html
- https://www.myfreedomsmokes.com/bat...ut-universal-car-charger-plug-w-usb-port.html
me spending your money
- VAMO 5 Sidewinder - Stainless MOD APV Variable Voltage Variable Wattage
- Rocket Mod, Stainless
- Genuine Fogger Atty v4.1 Rebuildable Tank Atomizer (RBA) by Yi Loong
- Dovpo E-LVT Firestone Waterproof Vape Mod Kit $39.99
yepper, seems like a great idea...
but to me sounds like it needs more work
and a better price...
you're sayin out/down the center tube ???
that sounds like your tank IS NOT SEALING
which won't allow a vacuum to seal it all up
check all your seals
wash it out, blow/suck thru it during assembly to find your leak
IMO
did you swap coils for good measure ?
I see some vendors do the 'box' trick
then if you want the box
they pass the extra shipping on to you/us
it's all a game (vendors & web shopping)
which needs to be played with great finesse
I just got my MVP 2 in the mail. I ordered Carbon Drawbench Black.
I think I was sent just the plain black, but wanted to confirm with you guys.
Is the Drawbench Black the one with a textured finish, almost like wood grain lines?
That's what I wanted, but the one I got is just plain black with no finish.
I think I was sent just the plain black, but wanted to confirm with you guys.
Is the Drawbench Black the one with a textured finish, almost like wood grain lines?
That's what I wanted, but the one I got is just plain black with no finish.
you're sayin out/down the center tube ???
that sounds like your tank IS NOT SEALING
which won't allow a vacuum to seal it all up
check all your seals
wash it out, blow/suck thru it during assembly to find your leak
IMO
did you swap coils for good measure ?
Thanks for the tips. Just disassembled the tank and went through the box that everything came in. Found what looks like a rubber nipple that goes over the coil. Swapped it out for a new coil that I purchased a while back. All of the coils have the rubber nipple over the wicks. I'm assuming that the lack of this rubber piece on my original coil is the reason for the issues?
haha YEPPER - that would be it !
I never thought that
but MANY people think that is some sort of packing/storage piece
that seals / separates your air flow from your juice chamber
glad ya got it worked out
Last edited:
- Status
Similar threads
