NEW RoyalSmokers C-E2 R4 Review, Tips, Info, Help, Video

[Fish Juice]

the mouth piece would be better so no it wont leak when you lay it down.

 

[nickf41680]

juice" data-source="post: 2098230" class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch">

Just remove drip tip and fill

Thats not what I'm saying... I'm saying all the space underneath the cup is wasted if u cut the intake tube u can lower the cup down... And fit more juice...

 

[Fish Juice]

Thats not what I'm saying... I'm saying all the space underneath the cup is wasted if u cut the intake tube u can lower the cup down... And fit more juice...

This is just idea I had and made real quick. I don't have a lot of time are nohow to take it much farther. I no some of you do so feel free if you want.

 

[stephenluke]

I didn't notice a "different" taste, just "more" taste. Like the coil was getting more juice. It was very similar to the taste of a regular PTB modded E2.

I think "more" taste is a better explanation.

 

[badkolo]

dont you dare leave the basement br.

 

[stephenluke]

I wrapped a coil with the PTB, 2 times around and the tails go to the bottom of the cart, still testing but so far, so good. Just waiting to see if it goes dry enough to burn it off the coil.

Storm and Banjo, if you're having good luck with the ptb over the coil, I wonder if it stands to reason that cutting off the wicks and lying a much thicker wick over the coil and down into the tube would do the same thing without burning. Does anybody have a source for wicks? It might be worth a test.

 

[nickf41680]

This is just idea I had and made real quick. I don't have a lot of time are nohow to take it much farther. I no some of you do so feel free if you want.

That's exactly why we Are all here to help each other and try to make a better product

 

[stephenluke]

dont you dare leave the basement br.

I can't help but notice how well your avatar illustrates some of your comments. Makes me laugh.

 

[br5495]

Thats not what I'm saying... I'm saying all the space underneath the cup is wasted if u cut the intake tube u can lower the cup down... And fit more juice...

A regular length E2 will do about the same as cutting the tube.

More juice may work OK, but in my upside down version it did not. Mine was OK with a small amount of juice in it, but the more I put in it, the wetter the coil and wick became.

dont you dare leave the basement br.

I'm beginning to feel like a caged monkey. Can you throw me down a banana?

 

[zoiDman]

... I think if I had a wider tube and a larger seal so I could drill holes for the wicks it may work.
...

Wider is a Key factor. Isn't that why the "Super Tanker" bottle mods worked better?

 

[badkolo]

i find that the wider the tank the more airy the vapor is, yes it does alleviate the issues but im having great success with the syringe and 6ml bottle. there seems to be so many variables.

 

[slopes]

I know you're not keen on the upside down mod BR - but wouldn't adding some light filler to the chamber suspend the juice and stop any flooding?

 

[roadrash]

1593 post and what have we learned? :>)

 

[dannoman]

...don't look now but a feedign frenzy has started over in the ali'i thread as the minutes tick down to the pre-order...they all jonesing over there

I know OT but I been giggling...

 

[Fish Juice]

I didn't no you had made one of these before br (sorry)
I now got the wick slits about right with no leaks. Ill make a larger one when I find some time.

 

[BanjoMan]

1593 post and what have we learned? :>)

Snarf! Snarf!

 

[badkolo]

1593 post and what have we learned? :>)

we have learned that a filler carto isnt the only way tot go and thanks to the e2 design we are able to make a myraid of different mods which hopefully and eventually turn into something the world will use one day. i think.lol

 

[br5495]

I know you're not keen on the upside down mod BR - but wouldn't adding some light filler to the chamber suspend the juice and stop any flooding?

Yes, adding filler will help. That's exactly why I stated in my post, "Now, don't anybody say anything about using filler with this thing. There's no point for us to reinvent the wheel." One reason I said that is because there are at least two cartomizers on the market that have an overhead filler.

But then, if I wanted to play with filler, I might want to check this stuff out and see what it does:

Spun Glass Angel Hair for Christmas Decorating (item #473655)

This version may not be as bad as that old stuff that became available in the 1940's.

 

[br5495]

I didn't no you had made one of these before br (sorry)
I now got the wick slits about right with no leaks. Ill make a larger one when I find some time.

Golly. Don't apologize. Mine wasn't like yours, but the principle is the same.

 

[dannoman]

I have to keep you guys updated on other threads cus you are so busy busting mod*%# in here. This is from CoV forum. Bruce called the factory to ask about E2's his customers were getting with primer. This is is what was said:

"Here is the response from the factory. I left it untouched "Chinglish" so you see what I deal with!

Bruce (Cov): Why the bad taste and the primer fluid inside....

Chief of QC: Because we test all of our cartomizers,so we fill a little favouless omg liquid,if some cartomizers's function we need test several times(2-3 times),so we fill several times liquid,for one time,just 1 drip, however it is just several piece need to do like this! and if some cartomizers test the function at the first time,it is good,so we would not test them! maybe your customer test the cartomizers which one is we test several times! "

So the customers that got the primer filled cartos should be thankful, their cartos have been THOROUGHLY tested!