Older Folks and Vaping Front Porch - Part 2
- Thread starter MikeE3
- Start date
- th_trl_thread_readers 0
- Status
The vape Lair side of the man cave is coming along nicely as well. I built a 22X11 room and split it 50/50 for the man cave...girlfriend got a dedicated quilting/sewing room out of the deal.
I really do have to watch myself and keep things clean and orderly otherwise it goes downhill fast!
I really do have to watch myself and keep things clean and orderly otherwise it goes downhill fast!
sorry.
if you swap the first letters, it's the catch-phrase of one of the most obnoxious utube dudes.
i was trying to subtly express my disdain for him, while trying to give extreme props for the amazing photo Absintheur posted
I had an office/ man cave and my wife still has a scrap book/ quilting room until my son moved in/ left his mother.The Vape Lair side of the man cave is coming along nicely as well. I built a 22X11 room and split it 50/50 for the man cave...girlfriend got a dedicated quilting/sewing room out of the deal.
I really do have to watch myself and keep things clean and orderly otherwise it goes downhill fast!
I would like to have a vape lair and mixing room some day in the near future.
I have to rebuild my TaifunGT soon. Got the bigger 1.5mm air tub to install today.
Last edited:
URGENT PSA (Porch Service Announcement):
semi has "been busy but will pop in this weekend."
Please note that this info is from one of our 'guardian angels'.
OK, what kinda 'greeting' are we gonna bestow upon his 'return'?
semi has "been busy but will pop in this weekend."
Please note that this info is from one of our 'guardian angels'.
OK, what kinda 'greeting' are we gonna bestow upon his 'return'?
sorry.
if you swap the first letters, it's the catch-phrase of one of the most obnoxious utube dudes.
i was trying to subtly express my disdain for him, while trying to give extreme props for the amazing photo Absintheur posted
Allow me to express the minority viewpoint: I like Rip Trippers.
There, I said it.
We now return to our originally scheduled program, already in progress.
So, I took a chance with one of my R91s tonight. I wrapped a 1/16th, 28g, 9 wrap coil with KGD and to my surprise it is vapping really good on a mech! Came out at 1.25 ohms. I always burnt them up before. I think because I couldn't get the organic cotton ball uniform enough and chocked them out. Of course this is after I made the trip to Harbor Freight to get the bits to grind out the juice channels. I haven't done this yet and may not have to. I may be changing my thoughts on KFL builds!
time will tell!
Oh, got the air tube put in the Taifun! Makes a big difference!
time will tell!Oh, got the air tube put in the Taifun! Makes a big difference!
Last edited:
My Foredom has the foot switch and a couple different shafts and the lathe is foot switched as well. I have dies from just about everyone...lol...Dillion, Lee, RCBS, Hornady, etc. Goes with the territory...
Great job on the spring as well, making a part and fixing something is always very gratifying!
Went back and revisited your picture with the thought - if Dillion could just make a progressive press for rebuilding atty's - how sweet that would be. Stage 1, remove old wick: Stage 2, dry burn coil: Stage 3 - resize coil: Stage 4 - insert new wick.
BTW - looks to be a nice PV collection on the back wall.
As many times as people have quoted the picture... Including yourself, removing it from the original post just won't work...
Sic 'em Janet!!
Then again... I don't even HAVE a work area and I live alone!! Instead, my office is a storage room and the other spare room is a library.
With a choice between vape and book, sorry, vape takes second. I have over 6,000 books
Not that the library is all that neat either.
See above picture and guess where my hobby/craft/work room is located.Yeah, well, ummm. My work bench consists of a 6'X2'cabinet out in the garage with 2X8's screwed to the top of it so your WAY out of my league. I can only wish for a finished basement to have a man cave in. My 18 year old still inhabits my future man cave!He was a second marriage, younger woman thing. On my therd and final now!
Anyway, Great looking shop there! I have a reloading starter kit still in the box, also out in the garage.
If it ain't broke, don't fix itSo, I took a chance with one of my R91s tonight. I wrapped a 1/16th, 28g, 9 wrap coil with KGD and to my surprise it is vapping really good on a mech! Came out at 1.25 ohms. I always burnt them up before. I think because I couldn't get the organic cotton ball uniform enough and chocked them out. Of course this is after I made the trip to Harbor Freight to get the bits to grind out the juice channels. I haven't done this yet and may not have to. I may be changing my thoughts on KFL builds!
I'm running a dual coil build down at 0.9 Ohms right now, and I needed the extra airflow and wicking to get there. If you're enjoying your build, then there's no reason to change (unless you just like to tinker).
sorry.
if you swap the first letters, it's the catch-phrase of one of the most obnoxious utube dudes.
i was trying to subtly express my disdain for him, while trying to give extreme props for the amazing photo Absintheur posted
Okay, that went so far over my head I needed binoculars to see it. Glad you clarified.
The Vape Lair side of the man cave is coming along nicely as well. I built a 22X11 room and split it 50/50 for the man cave...girlfriend got a dedicated quilting/sewing room out of the deal.
I really do have to watch myself and keep things clean and orderly otherwise it goes downhill fast!
Anybody else getting a chronic case of work room/tool envy from all these photographs? Very nice you guys.
URGENT PSA (Porch Service Announcement):
semi has "been busy but will pop in this weekend."
Please note that this info is from one of our 'guardian angels'.
OK, what kinda 'greeting' are we gonna bestow upon his 'return'?
Keg and a salad bar?
Just wondering if anyone rebuilds , where do they buy and what do they use as far as wire , wicks , cotton ?
As for the atomiser I like the look of these rdta well not the look but the drip plus tank or a rta if the couple of rdta I have seen are no good and I am more interested in the rebuilding bit and the tank than dripping capabilities.
Just if you can have both and its good but very good rta would be preferable to an ok rdta
As for the atomiser I like the look of these rdta well not the look but the drip plus tank or a rta if the couple of rdta I have seen are no good and I am more interested in the rebuilding bit and the tank than dripping capabilities.
Just if you can have both and its good but very good rta would be preferable to an ok rdta
Last edited:
Just on a lark, yesterday and the day before I recoiled all my clearo heads, got the system down tight. Most are 2.2Ω. I would recommend you get that down good before advancing to RBA's.
I got a speaker for the music on my cellphone-- hooking it up to my HA's picked up too much static. I also ordered a book to help me with the mind-numbing task I have been doing.
I got a speaker for the music on my cellphone-- hooking it up to my HA's picked up too much static. I also ordered a book to help me with the mind-numbing task I have been doing.
Last edited:
URGENT PSA (Porch Service Announcement):
semi has "been busy but will pop in this weekend."
Please note that this info is from one of our 'guardian angels'.
OK, what kinda 'greeting' are we gonna bestow upon his 'return'?
Welcome back semi, I have to do this now cause I just can't keep up. He will be here and gone before I get back which will only probably be a day
Last edited:
Looks like a great buy on the Eleaf Istick. $29.99 and free shipping ~ it's a pre-order.
Have a great weekend everyone!!!
Have a great weekend everyone!!!
Too late! In our case I already know it's a lost cause. This reminds me of the day I took a freshly washed and folded stack of clothes to our son's room. I opened the door and couldn't even see the carpet for all the stuff laying around. So, I tossed in the stack of clothes and closed the door. Why make myself crazy? I suspect some of those dust bunnies had names and favorite baseballs teams. Just don't EVER ask me where something is!
I have one of those vape lairs! It's called the kitchen counter next to the sink. Of course I do clean up/put away my mess when I'm done... Speaking of vaping juice, I just broke down and bought 250 ml bottles for my favorite ADV. That way I don't have to clean up the whole mess as often. It would be nice to have a dedicated kitchen cabinet just for vaping stuff, but I'd need a bigger kitchen. Hmmmm.
I don't have to worry about the kitchen, have a deal with the GF on that...I cook and she cleans, works out great.
Btw...tried something new this morning. Took the cheap cinnamon rolls in the refrigerator can and cooked them with a waffle iron. 90 seconds and they were crispy all over the outside, tender on the inside...very tasty!
Btw...tried something new this morning. Took the cheap cinnamon rolls in the refrigerator can and cooked them with a waffle iron. 90 seconds and they were crispy all over the outside, tender on the inside...very tasty!
- Status
Similar threads
