Older Folks and Vaping Front Porch - Part Four

[Robert Cromwell]

I keep my vape stuff scattered out so when the vape cops show up they will not find it all.

 

[3mg Meniere]

I keep my vape stuff scattered out so when the vape cops show up they will not find it all.

Now that is an interesting excuse!!

 

[2legsshrt]

Thought I'd keep everybody on their toes by multi-quoting a bunch of stuff from the Back Porch and putting it here on the Front Porch, since most of it is vaping related. This time, was able to do it simply by moving to the Front Porch and hitting "insert quotes".It's not at all likely that the guy got fired. Relocated, yes, but probably not fired and probably no discipline issued.

I think you were right the first time, because the Lipos are 3 times the voltage. Still, a triple-18650 mod using 2500 mah batteries would be 7500 mah.

Are you sure that Vapor DNA actually had the Reuleaux in stock? Every place I can find is pre-order, but there is a place on Ebay accepting pre-orders for $150, a savings of $20. If I order one of the first batch, the second batch will be superior. I'm waiting for the 3rd batch, or ordering one immediately after I finish this post, not sure which. *

This relates to one of the last spirited discussions that my sibs and I had when dad was still around. Not sure what side anybody was on.... we are all experienced with using the "act as if you know what you're talking about" discussion technique. Anyway, my point of view is that since the boundary dividing the Eastern Hemisphere from the Western Hemisphere is arbitrary and imaginary, then any argument which uses that boundary is likewise arbitrary.

I don't see how anything could be easier that titanium but then again, I just make single coils and I don't do any dry burning or pulsing. I never see my coils fire because the first time I fire them they're in my clearo making vapor for my enjoyment.

*It turns out that I chose Option B and ordered one here, because buying from a place named Fuggin Vapor Co is something I couldn't resist, and because it was the best price I saw. My biggest of many reasons for wanting this is to have a TC device which is properly set up for SS 304.
Wismec Reuleaux Mod DNA 200 Technology Brand New Authentic

I think that all the places that are going to have them already had the first shipment on pre order. The next shipment they say will be mid December. I can see that 1 DNA200 would be fun but I was watching how the curve works and the way it was explained it usually doesn't happen till above 400F which I rarely go to. The TCR setting is working perfectly on the SXM. This Zivipf NiFe48 is working amazingly well. It is easier then Ti because you can just wrap a microcoil on whatever you use. I heated it at 12w Power mode till it glowed strummed it till it glowed from inside out. Wicked it started vaping at 350F now at 400F. Holding temp better then Ti very good flavor. I really think this might be the wire to have. 6 wraps 2.5mm microcoil .21ohms. On my second tank with the STM. I am definately changing 1 or 2 more over today. Using wire wizard it is the same as Nifethal52 TCR wise and coil wise which is what it is Zivipf just put a different name on it. Oh and none of the other wires can be dry fired safely this one works just like Kanthal.

 

[Kenna]

Waiting for my yellow to arrive. I can almost put all my PVs in one place now.

You almost need a separate table just for that pipe!

 

[mattiem]

Waiting for my yellow to arrive. I can almost put all my PVs in one place now.

What are they and WHERE can I get me some? Love 'em!!!!!!!

 

[bigbells]

I keep my vape stuff scattered out so when the vape cops show up they will not find it all.

I'm making a note of that! I keep my notes scattered too.

 

[Ken_A]

What are they and WHERE can I get me some? Love 'em!!!!!!!

I make them on one of my 3D printers. lovely invention... I can imagine what I want to make, and make it.

 

[mattiem]

I make them on one of my 3D printers. lovely invention... I can imagine what I want to make, and make it.

Fantastic !!!!!!!! Guess I need to talk hubby into one of these

 

[DavidOck]

I think you were right the first time, because the Lipos are 3 times the voltage. Still, a triple-18650 mod using 2500 mah batteries would be 7500 mah.

If in parallel config. If series (where you get the higher voltage), still would be 2500 mAh.

 

[Kenna]

I make them on one of my 3D printers. lovely invention... I can imagine what I want to make, and make it.

You've really got it down now, Ken. Those are really cool!

 

[MattB101]

I keep my vape stuff scattered out so when the vape cops show up they will not find it all.

Of course neither will you!

 

[Robert Cromwell]

I heep it all in my hidey hole under the front porch.

 

[Boden]

I heep it all in my hidey hole under the front porch.

That rustling you hear under your front porch… It's just the wind

 

[Boden]

I've gone low tech

 

[bigbells]

If in parallel config. If series (where you get the higher voltage), still would be 2500 mAh.

Don't go trying to confuse me now. It's been done before anyway.

As a vaper, I use mah as a rough estimate of how long I can use my mod before needing to recharge the battery or batteries. If I've got 3 2500 mah batteries I'm gonna get 7500 mah no matter how they're wired, as long as they're wired into the same circuit.

I know that's right because I read it on the Internet. And, I think Sloth used to say something similar. If you can get him to respond I won't care if I'm wrong.

 

[Ken_A]

You've really got it down now, Ken. Those are really cool!

thanks. they are really easy to design and print. I have some with connectors just on the sides, and wanted to make it more versatile, so I just put connectors on the other sides. Right now, I've printed my two yellow ones, but I have some mods that are still too big to put in them, so I'm printing a double-wide... and hoping it will fit.

EDIT: rather than wait until I had wasted a bunch of filament, I did that other thing you can do with a 3D printer... I stopped it and checked the fit. Traditionally, you would send the file to be CNC'd get it back in a few weeks, then adjust anything you needed and send the new file and wait another few weeks.
But this way, I save lots of time and money!

You can see one of the yellow singles put in it's place... This is actually lots of fun. I may just take this larger size and see how I can split it up... maybe a round and a square or something....

 

[Debadoo]

maybe a round and a square or something....

I'm waiting to see a purple car cup holder one!!

 

[Kenna]

thanks. they are really easy to design and print. I have some with connectors just on the sides, and wanted to make it more versatile, so I just put connectors on the other sides. Right now, I've printed my two yellow ones, but I have some mods that are still too big to put in them, so I'm printing a double-wide... and hoping it will fit.

EDIT: rather than wait until I had wasted a bunch of filament, I did that other thing you can do with a 3D printer... I stopped it and checked the fit. Traditionally, you would send the file to be CNC'd get it back in a few weeks, then adjust anything you needed and send the new file and wait another few weeks.
But this way, I save lots of time and money!

You can see one of the yellow singles put in it's place... This is actually lots of fun. I may just take this larger size and see how I can split it up... maybe a round and a square or something....

So you can correct & adjust on the fly. That's so much easier & cost effective.

I'm burying my stuff in the back yard. In a coffee can. Under a rose bush. Or maybe a small headstone engraved "Fluffy".

 

[Robert Cromwell]

I've gone low tech
View attachment 505730

My New Yorkers came in but not the Velocity mini or the HG2's yet.
Vapin a 1.8 T3 on a new yorker right now. With a recycled laptop 1850 though.
Fine for a 1.8 coil. Running in the neighborhood of 8 watts.

Got some 24 and 26 ga Kanthal on the way as well.

 

[MattB101]

I ask this on the back porch but, I'm reposting it here because some folks seem to be porch exclusive. Thanks

Does anybody have a link to the recipe collection that keep getting mentioned over in the TFA Recipe Thread. I'm only up to around page twenty reading and they keep mentioning moving the various completed recipes somewhere but I can't find a link to them. Tried a couple of links that looked like they take you to a Google Doc but ECF says the file doesn't exist. Since I'm pretty much working from TFA flavors to avoid confusion I sure would like a copy. Thanks in advance.

Going back to bed. Goodnight all again! See you in the AM.