Older Folks and Vaping Front Porch - Part Four

Status
Not open for further replies.

subwayaznm

A Geek with a Cool slice
Verified Member
Jan 24, 2016
1,433
6,323
USA
I wish, some great food there!

Ok folks, been up 25 hrs....gonna eat a lil sumpthin then go to bed. Nite y'all
Debadoo there sure is and since I've quit the Cigs it all taste so much better . And for a Foodie that's a great benefit.
Many DDD Restaurants too.
But you have the BBQ places
 

Diver9543

Resting In Peace
ECF Veteran
Feb 26, 2015
1,735
26,975
Oklahoma City, OK, USA
Hi everyone; I'm new to ECF but been vaping for three years now.
I moved to NM and the altitude revealed the beginning stages of COPD. At that time I had went back to Cigs and quit them right away and went back to vaping steady and haven't looked back.
I've made my own juice using a 1 ltd. Oak Barrel like Five Pawns e Liquid which was great and I knew what was in the liquid. However I didn't use the liquid fast enough and had to throw much of it out. I now look for juices that are natural and tested to assure what I'm putting in my body is of high quality and not filled with things that should be or are harmful. So any suggestions are sure welcomed.
I'm so glad I found this Thread since I'm 59 and I feel that we slightly older folks Vape different than our younger counterparts.
I look forward to sharing and learning from you all.
Keep vaping and Peace
Welcome to the porches. As you can see, there is a load of friendly helpful folks here and on the back porch.
 

Kenna

Vaping Master
ECF Veteran
Verified Member
Aug 14, 2014
7,367
121,493
Texas, USA
Debadoo there sure is and since I've quit the Cigs it all taste so much better . And for a Foodie that's a great benefit.
Many DDD Restaurants too.
But you have the BBQ places
We haz ALL da BBQ's!

Sent from my LG-V700 using Tapatalk
 

subwayaznm

A Geek with a Cool slice
Verified Member
Jan 24, 2016
1,433
6,323
USA
If anyone is interested in getting a deal the SXmini ML class is $199.95 go to vapedojo.com and enter the code sxmini and it is $100 off $99.95 free shipping. Several people have already got them so there ya go. And they have been delivered fast I don't know now because they have 7 stores in Maryland but the deal is still going. YiHi is going to honor the warranty because this place is way overstocked.
Thanks for the Tip 2legsshrt, great deal there
 

subwayaznm

A Geek with a Cool slice
Verified Member
Jan 24, 2016
1,433
6,323
USA
Sure can!

0mg_MegaOrchid.jpg
DancingHeretik, is that a bottom feed tank? And how do you like it?
 

3mg Meniere

Vaping Master
ECF Veteran
Verified Member
Mar 24, 2013
6,493
65,098
75
Tomah Wisconsin
One of my Nemmys is having trouble. I mixed copper and stainless from two of them. Different brands, and I thought the threads were compatible. It is all frozen up, with a battery inside that needs to be recharged. I used pliers on it, but no movement anywhere. I put it in the freezer for a bit, and did get some movement, but not enough, it appeared to quit moving as I worked with it and it warmed up. Will leave it in the freezer overnight and borrow another pair of pliers in the morning. Freezing it in order to unfreeze it, eh?

More reports to follow. Any ideas are welcome. Will definitely un-mix it once I get it loose.
 

subwayaznm

A Geek with a Cool slice
Verified Member
Jan 24, 2016
1,433
6,323
USA
One of my Nemmys is having trouble. I mixed copper and stainless from two of them. Different brands, and I thought the threads were compatible. It is all frozen up, with a battery inside that needs to be recharged. I used pliers on it, but no movement anywhere. I put it in the freezer for a bit, and did get some movement, but not enough, it appeared to quit moving as I worked with it and it warmed up. Will leave it in the freezer overnight and borrow another pair of pliers in the morning. Freezing it in order to unfreeze it, eh?

More reports to follow. Any ideas are welcome. Will definitely un-mix it once I get it loose.
When you take it out of the freezer try a little WD40 prior to the next attempt. It might help
 

2legsshrt

Resting In Peace
ECF Veteran
Oct 19, 2009
7,162
107,789
75
Spokane,WA
Thanks for the Tip 2legsshrt, great deal there
It is I couldn't resist it either. A lot of people on the SX ML thread have already gotten theirs from there mine is delayed because of the storm. They were going to try to make it in today but I'm sure they have a bunch of orders so I am working on making Logos for it. Kind of a hassle getting windows 10 set up with the software they use but finally did it and have the drivers loaded on my computer. If you have win 7 much easier. Took me a couple of hours to get it to accept the drivers to be able to upgrade it when it gets here now I can just plug it in and do it.
 

subwayaznm

A Geek with a Cool slice
Verified Member
Jan 24, 2016
1,433
6,323
USA
It is I couldn't resist it either. A lot of people on the SX ML thread have already gotten theirs from there mine is delayed because of the storm. They were going to try to make it in today but I'm sure they have a bunch of orders so I am working on making Logos for it. Kind of a hassle getting windows 10 set up with the software they use but finally did it and have the drivers loaded on my computer. If you have win 7 much easier. Took me a couple of hours to get it to accept the drivers to be able to upgrade it when it gets here now I can just plug it in and do it.
I'm a Mac User so I'm sure that part should be interesting but worth the effort for sure. That Logo is COOL.
Thanks again
 

subwayaznm

A Geek with a Cool slice
Verified Member
Jan 24, 2016
1,433
6,323
USA
Borrowed the second set of pliers, and will go to the convenience store in the morning to get a can of WD. Unless someone thinks vegetable oil or juice might work as well. I could apply one or the other tonight to give it a chance to soak in.
Veg Oil heated slightly
 

subwayaznm

A Geek with a Cool slice
Verified Member
Jan 24, 2016
1,433
6,323
USA
I don't know if you can do it on a mac you might have to go to somebodys house with windows.
That's what I'm afraid of; but I'll give it a go and see
I checked the Thread and was at least able to find a link for the Support and shot them off an email to see if they have a fix @ YIHI. I will post back on YIHI response to help others with a Mac
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread