Older Folks and Vaping Front Porch - Part Four

Status
Not open for further replies.

Von Vape

Super Member
ECF Veteran
Mar 17, 2016
491
10,237
Nah. Just put the military out of bizness. No biggie.
Hey! The law's the law and deeming regs are deeming regs. :D Not MY fault if the military is supplying something that could possibly be used in the production of a nicotine delivery device. :lol: Hmmm, glaringly obvious the FDA didn't think this out too well........ :lol: :lol: :lol: :lol:
 

2legsshrt

Resting In Peace
ECF Veteran
Oct 19, 2009
7,162
107,789
75
Spokane,WA
well dang..........I was gonna ask why ya didn't like em, but I saw why. I love em, don't throw em out. (Edited) No air restrictor and AFC wide open is perfect for me. Haven't refilled it yet, but folks say they don't leak. I'll find out when I do refill it.
(Edited) I just got the razor out and was going to scrape the smoke color off the glass. I cleaned the one I used and dropped the glass tube on a marble floor. Guess they aren't to durable glad they came with an extra tank. I was going to put a Ti coil in it and try again.(Edited) I left the coil in that I used last cause it was almost new and looked perfect its a 3mm SS316L 26awg spaced coil comes out right at .55ohms 8 wraps not wicked. (Edited)
 
Last edited by a moderator:

2legsshrt

Resting In Peace
ECF Veteran
Oct 19, 2009
7,162
107,789
75
Spokane,WA
@Debadoo I hope you are using low nic in them they made me dizzy. That was at 6mg. I got a kick out of Daniels review on the TFV V8 yesterday. He was vaping the octocoil which is one of the ones it comes with at 280w with one of the 300w mods he's tested that actuallly does it. Sheesh you couldn't even see him behind that cloud. For me it was too airy with the restrictor out even with the af closed but with the R in too tight with the AF wide open.
 

Debadoo

ECF Guru
ECF Veteran
Verified Member
May 18, 2012
18,052
133,969
Texas, near Fort Hood
Well good thing I looked here. They are the Black ones I have them in the classies for $40 including shipping but haven't got 1 bite. I just got the razor out and was going to scrape the smoke color off the glass. I cleaned the one I used and dropped the glass tube on a marble floor. Guess they aren't to durable glad they came with an extra tank. I was going to put a Ti coil in it and try again. If you want them PM me with your address we will be gone in July. I left the coil in that I used last cause it was almost new and looked perfect its a 3mm SS316L 26awg spaced coil comes out right at .55ohms 8 wraps not wicked. Like I say PM me and all the parts are there one isn't even open yet. You can pay me in July or not and I'll take them off the market.
I pm'd you......but if someone wants to pay you for them now, go ahead and do that if ya want, cuz I don't know if I'll have enough left after nic or not next month :wub:

@Debadoo I hope you are using low nic in them they made me dizzy. That was at 6mg.
newp. 21-24mg first two days I thought maybe I could cut down a bit with it, but now I don't know. Don't make me dizzy. Wish I could cut my nic so it would last longer, but I'll have to cut it super slowly, not more than 3 mg at a time.........maybe less. :facepalm:
 

Iffy

Vaping Master
ECF Veteran
Verified Member
Feb 3, 2011
9,626
79,411
Florida Suncoast
Anyone else have the 'sickness' and saves all their original boxes. I spent the last few days emptying out these boxes. Each still had some of the original spare parts, owners booklets, etc.

My shelf is now much more organized. The containers on the left are used toppers and spare parts. The boxes on the right are NIB toppers stashed for the future.

One thing I have plenty of backups for are those dang useless screwdrivers.

Mike, I may have stuphph I haven't used yet, but at least I'll have sum new stuphph to learn when dere's no new 'shinieitis' due to da 'deeming'...
mock.gif


Can foresee da DIY Recipe thread explodin' (more time fer experimenting)!

Seriously, I really do need to conduct an inventory and do some major organizing!



Von Vape,

Ya just became my most recent vapin' hero! Must admit dat sum leaking rationale have totally countered my awesome 7th grade physics teacher. Dat was back when I knew more 'bout da Bell jar dan subsequent Mason jars several years later...
whistle.gif
 

Debadoo

ECF Guru
ECF Veteran
Verified Member
May 18, 2012
18,052
133,969
Texas, near Fort Hood
Don't mess with Debadoo's nic! She's got a frying pan!!! :shock: :lol:
durn tootin!!! Y'all don't wanna see me without enough nic. When I wuz still smokin, my son watched me go 12 hours without cigs (wasn't vaping then) it freaked the crap outta him.....and he spent a year in Iraq and was heading to Afghanistan til they found out he needed surgery.

Ya just became my most recent vapin' hero! Must admit dat sum leaking rationale have totally countered my awesome 7th grade physics teacher. Dat was back when I knew more 'bout da Bell jar dan subsequent Mason jars several years later...
whistle.gif
yeah he kinda got me with Bernoulli's principle. I know I learned that when I was in school for respiratory therapy........but now I'd have to look it up again, cuz I don't member what it was :facepalm:
 

Robert Cromwell

Moved On
ECF Veteran
Feb 16, 2015
14,009
65,472
elsewhere
Yes, technically that is a form of vacuum, much the same as a vacuum cleaner is a form of vacuum. That "form" is a scavenging vacuum and only exists as long as there is a draw through the chamber or plenum. Also the same way a well designed collector and set of header tubes works to scavenge the exhaust gasses (or vacuum) from a different cylinder's exhaust tube or for the whole thing to "vacuum" your PCV in the rocker cover. Once the parasitic flow stops, there is no "vacuum". The space reverts to mean barometric pressure. ;) It is actually a fairly loose definition of the term vacuum that is also often referred to as a flow zone or negative or positive pressure zone (depending on whether you are evacuating or increasing the amount of air in that space.).

This may really blow your mind; think combination leaf blower/lawn vac!!! :shock: :lol: :lol: :lol: Attach the tube to one end and it blows, attach it to the other and it sucks! :shock: :shock: :shock: But it doesn't do EITHER unless the motor is running. ;)

Just Sayin'
:cool: Von Vape :cool:
And you get no vapor unless you suck. Nor does the juice flow.
The juice must flow.
I have tanks sitting in a rack full of juice for a month. Why don't they drain out? Because I am not sucking on them. And because of the vacuum in the top of the tank caused by the weight of the ejuice.
But apply vacuum to the coil chamber and the juice will flow.

I was explaining the vacuum forces taking place in a bottom coil tank to explain how they work not about the vacuum of space.
 

Robert Cromwell

Moved On
ECF Veteran
Feb 16, 2015
14,009
65,472
elsewhere
That was going to be my next question, are they QUALITY screw drivers? All tempered and properly machined. You're a psychic, MikeE3!!! :) :thumbs:
The little pretty screwdrivers with the orings and key chain are pathetic imho. At least the ones I have had. Heads are softer than a politicians.
 

DancingHeretik

Dancing in the Chaos
ECF Veteran
Verified Member
Mar 20, 2011
8,837
62,106
San Antonio, TX
Not true :p! I've read that the o-ring that's on them is the same size as the Kayfun Lite Plus V2 fill hole o-ring. :D
I guess I don't have to stock up on o-rings for my fill screws than. But, I do need more fill screws.
 

Iffy

Vaping Master
ECF Veteran
Verified Member
Feb 3, 2011
9,626
79,411
Florida Suncoast
The little 3 way Wotofo tool is nice though.

Ummm, think I had a lil' Wotofo while R&R in Malaysia ('67)... at da time didn't know it was a vaping aid! <Yepper, da shots worked... food poisoning is a bear!>

worthless.gif
 

Robert Cromwell

Moved On
ECF Veteran
Feb 16, 2015
14,009
65,472
elsewhere
Ummm, think I had a lil' Wotofo while R&R in Malaysia ('67)... at da time didn't know it was a vaping aid! <Yepper, da shots worked... food poisoning is a bear!>

worthless.gif
Hear that Iffy! No more talk of your R&R dealings in the open forum!
 

2legsshrt

Resting In Peace
ECF Veteran
Oct 19, 2009
7,162
107,789
75
Spokane,WA
newp. 21-24mg first two days I thought maybe I could cut down a bit with it, but now I don't know. Don't make me dizzy. Wish I could cut my nic so it would last longer, but I'll have to cut it super slowly, not more than 3 mg at a time.........maybe less. :facepalm:
Damn even Daniel doesn't use high nic. Watch that video on the TFV V8 review on YouTube it's funny. He uses 3mg and when he does his reviews sometimes 0.
 

2legsshrt

Resting In Peace
ECF Veteran
Oct 19, 2009
7,162
107,789
75
Spokane,WA
Dagnabbit...ya gots to stop the dealings in the open forum, outside of the classifieds and talking about what's in the classifieds - please ! :rules:
Sorry that was me and I knew better but I wanted to catch her while she was on. I don't have anything else to sell so won't do it again.
 
Status
Not open for further replies.

Users who are viewing this thread