Older Folks and Vaping Front Porch - Part Four

Status
Not open for further replies.

2legsshrt

Resting In Peace
ECF Veteran
Oct 19, 2009
7,162
107,789
75
Spokane,WA
The only diff I can find is the clone has a black Svoe Mesto mark which is good makes it easier to see how many turns you have it open. It really wasn't dirty and all the threads are great. I don't care for the #21 Oring it is fatter will replace that with the real thing.
 

retired1

Administrator
Admin
Supporting Member
ECF Veteran
Verified Member
Apr 5, 2013
51,376
46,176
Texas
Glad to be wrong! Just this once, tho.

7Lsjcd6.gif
 

Kenna

Vaping Master
ECF Veteran
Verified Member
Aug 14, 2014
7,367
121,493
Texas, USA
I retired in March after my company folded, but I had to apply for jobs to get unemployment benefit. I tried very hard not to get a job, then despite my efforts I was offered a 24 hour a week job for really good money so I took it. Started this week.

Thing is, I had got used to being able to vape whenever I wanted all day. Now I'm working in a place where I can't vape. I get two 10 minute breaks and a half hour lunch in an 8 hour day.

It wasn't as bad as I expected. I get a little edgy after a few hours but it's bearable, don't even think about it if I'm busy. I take my breaks in a service and delivery area underneath the building. It's too far to walk to get to the outside and still have any time to do my thing. Being stuck indoors 3 days a week is a bigger pain than not being able to vape.
Raise your nic on work days to carry you between breaks.
 

Kenna

Vaping Master
ECF Veteran
Verified Member
Aug 14, 2014
7,367
121,493
Texas, USA
@Kenna how many turns open do you have your juice flow?
Depends on the juice. I don't count turns. I balance it with the airflow & the flavor I want from a particular juice at a particular power. Usually about half way open. I just look at the juice holes & adjust by that.
 

MikeE3

Vaping Master
Supporting Member
ECF Veteran
Verified Member
Aug 23, 2011
8,635
114,556
Downingtown, PA
Well I've got my Tobeco Kayfun 5 together same build as the authentic. I can't tell the difference. My wallet sure can though.

That's exactly what I say about my Tobeco V4s compared to my originals.
 

Diver9543

Resting In Peace
ECF Veteran
Feb 26, 2015
1,735
26,975
Oklahoma City, OK, USA
@kross8 & @subwayaznm welcome to the porches.
I really do enjoy the RX200 mods. I was having a problem with them, though. They would ask me if it was a new or same coil. It was happening anytime the mod was sitting for a while. I was going through the manual and there was a small blurb on "Resistance Locked Function". I followed the instructions and locked the resistance. No more asking if I have a new or same coil. Now I am going to have to check a couple of other mods that do the same thing and see if they offer the resistance lock function. It only appeared to be doing it when I am in TC mode.
 

2legsshrt

Resting In Peace
ECF Veteran
Oct 19, 2009
7,162
107,789
75
Spokane,WA
Shall we make it twice in the same thread on the same day? :lol:

Yes, it's possible, but the reasons are pretty strict.
You know I've been looking at your avatar. Is that a m or f. Sure does look like a pose. Good looking pup.
 

2legsshrt

Resting In Peace
ECF Veteran
Oct 19, 2009
7,162
107,789
75
Spokane,WA
That's exactly what I say about my Tobeco V4s compared to my originals.
Yep it's amazing how close it is. I think changing the Orings to the authentics will make it purrfect. Well worth $25. Might even get 1 or 2 more. Can afford that.
 

Debadoo

ECF Guru
ECF Veteran
Verified Member
May 18, 2012
18,052
133,969
Texas, near Fort Hood
. I was going through the manual and there was a small blurb on "Resistance Locked Function". I followed the instructions and locked the resistance. No more asking if I have a new or same coil. Now I am going to have to check a couple of other mods that do the same thing and see if they offer the resistance lock function. It only appeared to be doing it when I am in TC mode.
kewl you figured that out. I've seen other folks complain of the same thing, just don't recall if it was here or not, but I think it was.

That's Trixie and she's an absolute jewel.
She really is beautiful!

I am such a purdy girl and I know it dad.
lol Jup!
 

kross8

Ultra Member
ECF Veteran
Feb 20, 2016
2,406
15,278
stuck in a squishy pod called my brain
@kross8 & @subwayaznm welcome to the porches.
I really do enjoy the RX200 mods. I was having a problem with them, though. They would ask me if it was a new or same coil. It was happening anytime the mod was sitting for a while. I was going through the manual and there was a small blurb on "Resistance Locked Function". I followed the instructions and locked the resistance. No more asking if I have a new or same coil. Now I am going to have to check a couple of other mods that do the same thing and see if they offer the resistance lock function. It only appeared to be doing it when I am in TC mode.
thank you,,, now i gotta run around to the back porch to catch up on reading :) getting my exercise too hahaha
 
Status
Not open for further replies.

Users who are viewing this thread