Post pictures of your working wick and coil setup

[layman1141]

Cobra Clone - 30ga A1 kanthal 7/8 wraps @2.0-2.2 ohms 500X500 SS mesh, straw style. Man the flavor on this thing is fantastic. Built that coil in probably under 20 min. My best one yet.

 

[Tbev]

Does anyone with stingray clones have to use the safety to stand it up with a heavy atty without firing? Like a fogger v4 for example?

Sent from my Transformer TF101 using Tapatalk

 

[ertlandia]

Currently using a kraken on a hades, both clones. Pretty proud of the coil i built on it thou. 3 strand twisted 30gauge 325 ss mesh and cotton wicks. at .43 ohm running high vg juice

 

[Muggs]

This is a .7ohm dual coil on a Patriot

This is a .83ohm dual coil with organic cotton on a Fogger v4

 

[sedge]

Are the airholes on the Fogger v4 under the coils?

 

[Muggs]

Yes they are. The v4 is my favorite rebuildable with dual coil ability and a glass tank, no leaks, can't beat it.

 

[sedge]

Do you have Aqua experience to compare the Fogv4?

 

[LReyes66]

How do you guys center your coils single or dual?


I can do it ok when using a single coil on a 3 post quasar but when i attempt to do it on dual coil it gets messy.

 

[havok333]

Does anyone with stingray clones have to use the safety to stand it up with a heavy atty without firing? Like a fogger v4 for example?

Sent from my Transformer TF101 using Tapatalk

The heaviest RBA I have is an AGA-T2, and can try that on my Stingray clone when I get home tonight.

Sent from my XT1049 using Tapatalk

 

[Tbev]

Cool thanks bro, im looking for a new mod but I feel like a stingray is just another nemesis, on the other hand it's super clean in black with a black fogger v4.!

Sent from my Transformer TF101 using Tapatalk

 

[vampyrex13]

My current build in my Caterpillar RDA. It works great because this build coupled with the adjustable air holes lets me adjust the taste of my juices. I doubt I'm going to change out this build any time soon. It's two micro coils, only they're not the same on both sides. One is 7/6 wraps of triple twisted 30 gauge kanthal wire around a 1/16" drill bit while the other is a single 26 gauge wire with 10/9 wraps on the other at 0.41 Ohms. The twisted helps boost some of the other flavor aspects of the juices, while the normal coil helps retain the original flavor. With fully opened air holes, I get more of a mellow flavor, and with them partially closed, I get a more rich flavor. I have it resting on my Maraxus mod with the Silencer pyrex drip tip on top.

 

[Muggs]

Do you have Aqua experience to compare the Fogv4?

I don't man sorry.

 

[havok333]

Cool thanks bro, im looking for a new mod but I feel like a stingray is just another nemesis, on the other hand it's super clean in black with a black fogger v4.!

Sent from my Transformer TF101 using Tapatalk

The heaviest RBAs I have, none of them fired the stingray standing upright. Tried the AGA-T2, RSST, and a Kraken. Only issue is the firing button is a good bit wobbly so makes it not too sturdy with any topper, let alone one that's on the hefty side. Wobbly button being reported by others too with the black copper stingray by Infinite, so trying to find a fix myself.

Hope that helps a little, not to deter from this great looking mod. Hits hard as my older brother when I was a kid!

Sent from my XT1049 using Tapatalk

 

[Tbev]

Thanks for the info buddy, my nemi wobbles too, just enough to not really trust it but I usually make sure I can lay it down anyways.


Sent from my Transformer TF101 using Tapatalk

 

[havok333]

Thanks for the info buddy, my nemi wobbles too, just enough to not really trust it but I usually make sure I can lay it down anyways.


Sent from my Transformer TF101 using Tapatalk

Yeah, it's solid when locked though and I don't plan to park anything heavy up top. An Atomic looks really good and is working out well.

Sent from my XT1049 using Tapatalk

 

[Tbev]

If sure does I want a black fogger v4, it's heavy, but it also doesn't leak so I'll lay it down anyways. Boy that's a good looking mod

Sent from my Transformer TF101 using Tapatalk

 

[JBal4]

had to stack batts to get it ripping

 

[Muggs]

^^^ wow man that setup looks delicious.

 

[brawas]

My current build in a Kayfun 3.1






dual vertical serial coil. 28 gauge kenthal (5 wraps on each side), cotton wick. The wick was fed up through the first coil, over the top, down and out through the second coil. 1.5 ohms. It wicks really well so I can go much higher power (13w) without getting dry hits. It's not my favorite build, but pretty good.

 

[El Heisenberg]

My current build and first hand at a twisted setup,
Igo-L, twisted 30 gauge, 9 wraps on 1/16 drill bit 1.3 ohms.
It takes a bit longer to get hot, I'm still trying to get used to the vape as its a very different vape compared to my usual 28 gauge single micro coil.