Post pictures of your working wick and coil setup

[juggalofisher88]

6 pieces of 28ga kanthal.
3 individually twisted clockwise to straightened out the wire. The other 3 counterclockwise to straightened out kanthal.
3 that was clockwise now needs to come together and twist counterclockwise.
3 that was counterclockwise needs to be twisted together clockwise.
Leaving the one you just twisted on the drill grab pliers that are flat, grab the wire between the pliers at the drill. Start the drill and gently pull the pliers through the wire to flattened out. Repeat till it's flat.
Repeat for other wire but remember to go the same way that wire was twisted together.

After both are twisted and flattened, just do a parallel coil.

Holy cowbell that's going to be low ohms even with 30g (outta everything but 30 and 24)
I got a .3ohms limit on my raptor
Here we go... If my drills gotta cuff juice

 

[G-weezy]

Lol. I did 5/6 wrap macro and it came out to .34 ohms. I'll try it again later. Takes awhile to heat up when wicked but it produces tons of flavor and vapor.

 

[TheKiwi]

This was mine, but using 30ga. Tried 28, but with the 30ga the heat up time was way better

View attachment 380635

View attachment 380636


View attachment 380637
View attachment 380638

Still have no wicked it tho.

 

[juggalofisher88]

Heres mine thought i would try it with 4 strands instead of 6. (makes ne want to get done 32-34g to twist with.
.7ohms heats quick at 6v.
Wish i had some different attys but my TOBH won't work with my raptor mod
So i squeezed this into a igoW (off topic??? Can i remove one of them neg- post maybe pull it out with pliers...)
Getting ready to wick her up with rayon. And ill post back

Couldn't get a good fire pic

 

[PanAeon]

Resembles something?

Indeed it does Gonna assume those side screw holes are home grown...good thinking, deffo a plus with longer coil wraps

 

[Siochanai]

Here is my current setup I put in my Veritas this morning as I was in the mood to make a new style coil I never did before. I keep challenging myself whenever I have the spare time to see if I personally can handle more complex coil building only been rebuilding for less then a month started vaping on a RDA skipped all the other stuff because I love to tinker. This is a 2 strand 28 ga twisted 5 wrap Vertical coil on a 5/64 drill bit. Sits at 0.7 ohms. Vapes really well I think this is the most perfect coil I ever made heats up right from dead center.

 

[AMDTrucking]

Indeed it does Gonna assume those side screw holes are home grown...good thinking, deffo a plus with longer coil wraps

It is Kayfun 3.1 ES, NOT Kayfun Lite. They come with those holes and when you have those leads made out of NON Resistant wire, it doesn't matter how long they are.

This one is Kayfun Lite:

 

[xwarp]

For those that like to twist the wire into multiple strands, you might like a set of these. They can be found pretty cheap at pawn shop, thrift stores and the like.

Milbar 11W Safety Wire Twister Pliers 6" Manual Return New | eBay

 

[juggalofisher88]

For those that like to twist the wire into multiple strands, you might like a set of these. They can be found pretty cheap at pawn shop, thrift stores and the like.

Milbar 11W Safety Wire Twister Pliers 6" Manual Return New | eBay

Meh a drill works just fine

 

[TheKiwi]

Finally wicked up my build that I shared above. At 0.5 ohms, the heat up time is solid, and a 1 to 2 second draws give me HUGE vapor production. The strange thing is even with all my airflow completely maxed out, I'm getting great flavor. A little too intense in fact. Gonna hafta make a diluted batch of juice for this. Hmmm

 

[NikZak]

Yeah, I'm vaping on some strawberry kiwi flavored juice from SouthBeachVapor which was sold as a single shot strength, I've halved it (bought 12mg and diluted it 1:1 with VG to make 6mg) and the nic hit is perfect but the flavor is just so intense, might need to halve it again but add a bit of nic to it to keep it at 6mg... damn strong flavors, making me use up my unflavored VG... lol

 

[SLIPPY_EEL]

i did a little zipper myself at .2Ω 6strands 28g
3/32 id 4wrap
Rayon
Taste is awsome and the sound this coil makes against the rayon is beast, it sounds like a whizzing top

 

[Mikepresjr]

Dual coil 26g 11 wraps each, the dual 22 was just too hot for me (it was 0.2 ohms) this one clocks in at 0.7 ohms so it's substantially cooler and the larger coils supposedly add to the flavor.

 

[DavidOH]

Should have looked in this thread a long time ago. .6 ribbon wrapped on a 3/32 bit with 6 wraps is 1.3 ohm. In the KFL/C at 21 watts with cellucotton. The one I use is made from cotton not rayon.

 

[Makazkin]

Here is my setup. Single parallel coil, on Kanthal D 0.3mm. 7-8 wraps gave me 1.2 ohm. I have that setup in Igo-L which is on Hana with Evolv DNA 30.

 

[rhelton]

Meh a drill works just fine

Meh is right ive been using a ink pen

30g twisted 8 wraps 2mm @ .62 and 5.5v on the raptor works pretty good

 

[juggalofisher88]

Meh is right ive been using a ink pen

30g twisted 8 wraps 2mm @ .62 and 5.5v on the raptor works pretty good

24g twisted semi flattened. Wrapped it around a piece of metal like a zip tie.

Comes in at .5ohms, and even at 3.5v on my raptor there's no heat up time, and nice vapor. Tried a few pullS at 6v half second or less lungs full lol.
I think the heat up time is so quick because how thin the coil is. Kinda Llike a tall nano coil lol.

 

[Dissonance]

24 gauge wire parallel, 6 wraps around a screwdriver, .15Ω First time trying a parallel with 24g, kinda warm but I like it xD

 

[TheKiwi]

This thread will become interesting when folks get their dna40 devices and start building massive could with the nickel 200 wites

 

[Xobeloot]

Threaded a single piece of 26N through the center then wrapped/adjusted. I don't have OCD with my coils anymore. If it vapes well, awesome... Photogenic? meh!

Weeeeeeeeeeeee! :vape:

Nuppin'!