Thanks!
0.08Ω ...so somewhere under 220w, this 20ga A1 feels just about right like this, although i know i'm gonna have to break out tthe 20ga nichrome soon
.. just cant help myself *starts grabbing hold of Dark horse and 20g n* haha- Status
Thanks!
0.08Ω ...so somewhere under 220w, this 20ga A1 feels just about right like this, although i know i'm gonna have to break out tthe 20ga nichrome soon
.. just cant help myself *starts grabbing hold of Dark horse and 20g n* haha
My current "for fun" build when I want to chase some clouds:
3-strand twisted 29g kanthal, 7 wraps each on 2mm, final meter was .35, 100% VG, 0 nic..... Tons of fun!
3-strand twisted 29g kanthal, 7 wraps each on 2mm, final meter was .35, 100% VG, 0 nic..... Tons of fun!
so i tried 3/32 id 20ga nichrome and it looked like it would be a tight fit in the DarkHorse, i believe the MX is a nat's ball bigger so went with that but it wasnt good,
it came to 0.07Ω and the atty heats up way to much,
sat on the dimitri while test firing i would hear a *ping!* you know the noise when the wire is cooling down, but it isnt the wire, it was the MX's 510 pin expanding and contracting and in turn pushing the floating pin on mr dimitri away ...hahahaaa
i took a pic anyway so here it is but yeah alot of wire
it came to 0.07Ω and the atty heats up way to much,
sat on the dimitri while test firing i would hear a *ping!* you know the noise when the wire is cooling down, but it isnt the wire, it was the MX's 510 pin expanding and contracting and in turn pushing the floating pin on mr dimitri away ...hahahaaa
i took a pic anyway so here it is but yeah alot of wire
Sorry, kinda got carried away with the wraps, 16-17. Wanted to achieve 0.1 ohms minimum, got 0.11,,,woo
Dripped my fav juice with it wide open, picked myself off the floor and shut it down to this - warm, restricted lung draw, flavor --- perfect
Driven by a Protovapor DNA 40, 410F 22.5 watts
Life is sooooooooooooooooooooooooooooooooooooooooooooooo goooooooooooooooooooooooooooooooooooooooooooooood
Last edited:
Wicking is slivers of kogo cotton, loose fit in coil, but fills it, tails on the deck.
32g 3 strand, braided nichrome, .6ohm
Flattened super nano ribbon.
Jug your braided looks really clean i dont like they builds that hold heat to long either..
i dont like they builds that hold heat to long either..
Thanks i wanna try a 4-5strand braid just unsure about size.
Size of wha?
Thanks i wanna try a 4-5strand braid just unsure about size.
I just rebuilt one of my Sub Tanks occ heads with a 4 strand using 32 gauge. 4 wraps on a 3mm bit came out at .9 ohms. Vape isn't as warm as I'd hoped, but flavor is outstanding.
just saying.. 0.4Ω on 1/16th braid was a nice one with loosly touching or open wraps But i think it was a single coil of 4 wraps .... cant check right now LoL Must go ta bed after watching the fighting before the mrs starts trying to beat me up! hahahaa
0.4Ω on 1/16th braid was a nice one with loosly touching or open wraps But i think it was a single coil of 4 wraps .... cant check right now LoL Must go ta bed after watching the fighting before the mrs starts trying to beat me up! hahahaaJust built this today:
1.1 ohm micro coil. It hits extremely hard though, so I had to go all the way down to 11 watts to get some decent flavor. I think the twisted single coil provides a lot more flavor but this chucks vapor like crazy.
1.1 ohm micro coil. It hits extremely hard though, so I had to go all the way down to 11 watts to get some decent flavor. I think the twisted single coil provides a lot more flavor but this chucks vapor like crazy.
About as basic as it gets. Big Stillare 28.5mm dripper on a Boss mod. FT clones. Surprised I even got good contact on the negative posts, as the screws are quite crappy. But it works! Wanted the 5 post version in this size but it was sold out. Meh, no biggie. Been dripping Virtue from Nirvana Vapor/V4Vape and it's deeee-licious! Spot-on macadamia nut sugar cookie!
Cartel 26650 and Stillare 0002 by zipflint, on Flickr
Cartel 26650 and Stillare 0004 by zipflint, on Flickr
Cartel 26650 and Stillare 0003 by zipflint, on Flickr
Cartel 26650 and Stillare 0002 by zipflint, on FlickrCartel 26650 and Stillare 0004 by zipflint, on FlickrCartel 26650 and Stillare 0003 by zipflint, on Flickr
Dreamy, creamy wicking work, love these pics! Bet it takes a while before you dry hit on that build too.. Busy taming the V3 right now and also using Boss. Any major maintenance on the button?About as basic as it gets. Big Stillare 28.5mm dripper on a Boss mod. FT clones. Surprised I even got good contact on the negative posts, as the screws are quite crappy. But it works! Wanted the 5 post version in this size but it was sold out. Meh, no biggie. Been dripping Virtue from Nirvana Vapor/V4Vape and it's deeee-licious! Spot-on macadamia nut sugar cookie!
Yep, holds quite a bit of joose. Better flavor from this atty than my 26650-sized Tobh too. No issues at all with my Boss clone; button's a treat!
Plume Veil Clone Modded to bottom Feed. @ .6ohms
A7 Clone set up for bottom feeding @ .5ohms
A7 Clone set up for bottom feeding @ .5ohms
- Status
Similar threads
