A couple of days ago my 24mm ULTON 'kayfun Lite 2019' clone came in the mail. It was also ordered with the 24mm 'Long Mode' kit that increases the juice volume to 5 ml.
This was to be a replacement for the old 'Kayfun Lite-Plus V2' that I have been vaping on for the last 5 1/2 years.
The KF Lite 2019 was to be a direct and updated replacement for the old KF Lite-Plus V2. The KF Lite-Plus was truly one of the best Tootle-Puffer mouth to lung rebuildable atomizers ever manufactured, although it certainly is now an old design.
Well, the KF 2019 don't compare to the old KF Lite-Plus .....
1. The KF 2019 has too small of a chimney which causes it to be lacking in flavor, and produces a 'hot vape' due to the chimney's (vape chamber) overall small size.
2. The chimney is also really too short in that if you bring the coil up more than about 1 mm from the air hole in the atty's deck (which is right below the coil), the top of the coil will contact the top of the chimney and short out ... Keep the coil just high enough off the floor of the base so it don't make contact, but not too high or the coil will touch the top of the chimney (poor design).
3. The KF 2019 is a real 'gurgler' .... No matter how I would wick this thing, sooner or later it will start to gurgle (I tried every different wick style I could think of with no luck). My Kayfun Lite-Plus never gurgled like this.
4. Do to the design of the air inlet hole on the KF 2019, this atty tends to be noisy while vaping ... much noisier than the Kayfun Lite-Plus ever was ... Really get on your nerves after awhile (unless you use ear plugs while vaping)
5. I never was much of a fan of how the Kayfun Lite-Plus was refilled through the little screw on the bottom of the base, but removing the whole base section of the KF 2019 to refill it is a pain in the ... compared to refilling the old Kayfun Lite-Plus with it's tiny refill screw.
Bottom line ..... Do to the poor quality of the vape and the gurgling problem the new KF Lite 2019 has, I am going back to vaping my beloved Kayfun Lite-Plus V2.
My mistake ordering this 24mm Kayfun Lite 2019 clone.
And my second biggest mistake was ordering the smaller 22mm YFTK version of the Kayfun Lite 2019 that has not been delivered to me yet .... I may not even unbox it when it gets here.
Just my opinion folks ......
This was to be a replacement for the old 'Kayfun Lite-Plus V2' that I have been vaping on for the last 5 1/2 years.
The KF Lite 2019 was to be a direct and updated replacement for the old KF Lite-Plus V2. The KF Lite-Plus was truly one of the best Tootle-Puffer mouth to lung rebuildable atomizers ever manufactured, although it certainly is now an old design.
Well, the KF 2019 don't compare to the old KF Lite-Plus .....
1. The KF 2019 has too small of a chimney which causes it to be lacking in flavor, and produces a 'hot vape' due to the chimney's (vape chamber) overall small size.
2. The chimney is also really too short in that if you bring the coil up more than about 1 mm from the air hole in the atty's deck (which is right below the coil), the top of the coil will contact the top of the chimney and short out ... Keep the coil just high enough off the floor of the base so it don't make contact, but not too high or the coil will touch the top of the chimney (poor design).
3. The KF 2019 is a real 'gurgler' .... No matter how I would wick this thing, sooner or later it will start to gurgle (I tried every different wick style I could think of with no luck). My Kayfun Lite-Plus never gurgled like this.
4. Do to the design of the air inlet hole on the KF 2019, this atty tends to be noisy while vaping ... much noisier than the Kayfun Lite-Plus ever was ... Really get on your nerves after awhile (unless you use ear plugs while vaping)
5. I never was much of a fan of how the Kayfun Lite-Plus was refilled through the little screw on the bottom of the base, but removing the whole base section of the KF 2019 to refill it is a pain in the ... compared to refilling the old Kayfun Lite-Plus with it's tiny refill screw.
Bottom line ..... Do to the poor quality of the vape and the gurgling problem the new KF Lite 2019 has, I am going back to vaping my beloved Kayfun Lite-Plus V2.
My mistake ordering this 24mm Kayfun Lite 2019 clone.
And my second biggest mistake was ordering the smaller 22mm YFTK version of the Kayfun Lite 2019 that has not been delivered to me yet .... I may not even unbox it when it gets here.
Just my opinion folks ......