A razor blade works well; you can cut it flush with the top of the connector then sand it smooth. The plastic isn't very tough. Just watch your fingers!
Yeah I will give it a shot and see what I can come up with.
A razor blade works well; you can cut it flush with the top of the connector then sand it smooth. The plastic isn't very tough. Just watch your fingers!
I have been thru many Kicks and when 1 starts acting up I contact Evolv and they replace it for free..
Thanks, I may have to try that! It will just stop working, and I unscrew the top of the SB and then immediately screw it back on and the Kick works again. Is that what yours would do?
Take your SB apart and clean all contacts and threads...
I usually use alcohol on a cotton swab first and then go back with some WD-40 ( also on a cotton swab ) to lubricate them ( don't have any nolox yet ). This is typical of all mechanical devices and probably all devices in general... depending on use, clean either weekly or monthly ( I do it about one or twice a month on my Legacy and/or Bolt )
Thanks, I may have to try that! It will just stop working, and I unscrew the top of the SB and then immediately screw it back on and the Kick works again. Is that what yours would do?
Thanks, but already done regularly. It's definitely the Kick. If I remove it and use the SB without it I've never had one single issue.
Stylish Variable 4-Stage Mini eGo PassThru 3.0-4.8 - Stainless [gv-alpha-minipassthrough] - $8.49 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more
hello Alpha discussers is there any possible ETA on when this product will be available for non-alpha members?
also, does it require a 1.5A+ USB-to-wall adaptor like most passthroughs?
Stylish Variable 4-Stage Mini eGo PassThru 3.0-4.8 - Stainless [gv-alpha-minipassthrough] - $8.49 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more
hello Alpha discussers is there any possible ETA on when this product will be available for non-alpha members?
also, does it require a 1.5A+ USB-to-wall adaptor like most passthroughs?
Rocket-
Hey, I'm lazy and on my phone so I dont feel like trying to search. But what kind and size batteries do I need to get for the rocket I won?
I already knew that
18350s 3.7V
As far as the USB pass though you can always use an iPad charger if you have one. They are rated for 10A