Rayon Wick - Better Flow, Flavor, Longevity, and Nic Hit!! - Pt.2

[TrollDragon]

@Sloth Tonight What build are you running in the Enth?

Also have you seen the B2K RSA TRVP edition? A Canadian designed rda that has excellent flavor and a generous collection of included accessories. I have one inbound.

B2K RSA TRVP x CAVIAR Edition by BB VAPES BRVND – VAPEHAPPY

 

[Sloth Tonight]

@Sloth Tonight What build are you running in the Enth?

Also have you seen the B2K RSA TRVP edition? A Canadian designed rda that has excellent flavor and a generous collection of included accessories. I have one inbound.

B2K RSA TRVP x CAVIAR Edition by BB VAPES BRVND – VAPEHAPPY

I just run 24g ss316 on a 2.5 for 9 wraps i believe, nets about .33

That atty looks cool, is that new? Hard to tell in the pics but looks like plates that use hex screws...a dream in my opinion!

 

[TrollDragon]

I just run 24g ss316 on a 2.5 for 9 wraps i believe, nets about .33

That atty looks cool, is that new? Hard to tell in the pics but looks like plates that use hex screws...a dream in my opinion!

I'll give that build a try in mine, thanks!

It's been out for a time now and it is the 3rd edition. It has a postless deck and the screws you see on top are actually the spares.

Todd reviews the 2nd edition (KRNK Edition) and the only reviews of the linked one are in french.


Latest version in french.

 

[Sloth Tonight]

I'll give that build a try in mine, thanks!

It's been out for a time now and it is the 3rd edition. It has a postless deck and the screws you see on top are actually the spares.

Todd reviews the 2nd edition (KRNK Edition) and the only reviews of the linked one are in french.


Latest version in french.

Will check this out

 

[Heartsdelight]

What do you guys think of the Shenray version of the Entheon? It includes the extra driptips & 510 adaptor
ShenRay Entheon Style Silver 316SS 22mm BF RDA w/ Spare Drip Tips

There’s this no name version too, comes with all the driptip options & a ultem top cap. In reading the reviews a guy has an authentic & also ordered this one & thinks it’s 1:1 Clone. He said the clone is interchangeable with the Authentic.

Entheon Style BF RDA Silver 22mm Atomizer Kit w/ PEI Top Cap

And of course the SXK one but it doesn’t come with all the driptip options.

Help, can’t decide which one to get. Thanks!

 

[DavidOck]

At $12? Both, of course.

Then you can report on which is better.

 

[TrollDragon]

What do you guys think of the Shenray version of the Entheon? It includes the extra driptips & 510 adaptor
ShenRay Entheon Style Silver 316SS 22mm BF RDA w/ Spare Drip Tips

There’s this no name version too, comes with all the driptip options & a ultem top cap. In reading the reviews a guy has an authentic & also ordered this one & thinks it’s 1:1 Clone. He said the clone is interchangeable with the Authentic.

Entheon Style BF RDA Silver 22mm Atomizer Kit w/ PEI Top Cap

And of course the SXK one but it doesn’t come with all the driptip options.

Help, can’t decide which one to get. Thanks!

If you want a PEI top cap then grab the no name one, but I'd probably go with the Shenray if I was getting another one. Pass on the YFTK version as it supposedly has a plastic insulator instead of PEEK like the rest do.

 

[halfempty]

... Pass on the YFTK version as it supposedly has a plastic insulator instead of PEEK like the rest do.

Darn, now you tell me.

Guess I'll have to order another one even though the first one hasn't gotten here yet. Since it's to compensate for a design flaw, it would be exempt from "shiny" status. At least that's my story and I'm sticking with it.

 

[Heartsdelight]

If you want a PEI top cap then grab the no name one, but I'd probably go with the Shenray if I was getting another one. Pass on the YFTK version as it supposedly has a plastic insulator instead of PEEK like the rest do.

Thanks!

 

[TrollDragon]

Darn, now you tell me.

Guess I'll have to order another one even though the first one hasn't gotten here yet. Since it's to compensate for a design flaw, it would be exempt from "shiny" status. At least that's my story and I'm sticking with it.

Thanks!

@halfempty Well that might have been on the first batch of the YFTK's the ones that said "Hadaly" on the base with the plastic insulator. Either way if you don't dry burn your coils too hot you shouldn't have any issue with it melting if it is not PEEK. I went through the whole YFTK Entheon thread on FT and quite a few mention an off taste with it. So it will probably need a full tear down and good wash. The post insulator does not look to be the standard peek color that we are used to on other attys.

@Heartsdelight The Shenray is also mentioned in that thread and it's no where near a 1:1, the well is deeper, the top cap is higher and the walls are thinner. I guess it's a crap shoot with these manufacturers, some atty's they copy perfectly and some they add a little creative licence too. No reviews of the Shenray either, but if it vapes well than it's all good.

There is always the SXK version.

 

[Heartsdelight]

@halfempty Well that might have been on the first batch of the YFTK's the ones that said "Hadaly" on the base with the plastic insulator. Either way if you don't dry burn your coils too hot you shouldn't have any issue with it melting if it is not PEEK. I went through the whole YFTK Entheon thread on FT and quite a few mention an off taste with it. So it will probably need a full tear down and good wash. The post insulator does not look to be the standard peek color that we are used to on other attys.

@Heartsdelight The Shenray is also mentioned in that thread and it's no where near a 1:1, the well is deeper, the top cap is higher and the walls are thinner. I guess it's a crap shoot with these manufacturers, some atty's they copy perfectly and some they add a little creative licence too. No reviews of the Shenray either, but if it vapes well than it's all good.

There is always the SXK version.

Thanks @TrollDragon for all the info. So it’s down to the no name that the person who reviewed it said it was a 1:1 or the SXK Version. You are liking the SXK Version right? Only thing it’s missing I gather is the 510 Adaptor & additional driptips.

 

[TrollDragon]

Thanks @TrollDragon for all the info. So it’s down to the no name that the person who reviewed it said it was a 1:1 or the SXK Version. You are liking the SXK Version right? Only thing it’s missing I gather is the 510 Adaptor & additional driptips.

I like the SXK and it comes with the beauty ring and 510 adapter, it's attached to the Delrin drip tip, you can see it by itself in picture 5 on FT's listing. It doesn't have the stand alone Delrin drip tip like the no name one does though.

Grab the no name one with the PEI top cap, it looks good and that single review is quite positive.

This one comes with a draw string bag, PEI cap and all the drip tips too...
$11.99 Entheon Styled RDA Rebuildable Dripping Atomizer - 316 stainless steel / 22mm diameter / w/ BF pin at FastTech - Worldwide Free Shipping

 

[TrollDragon]

Quick someone post some Rayon, too much OT talkin's!

 

[Heartsdelight]

Quick someone post some Rayon, too much OT talkin's!

But it will be wicked with rayon as soon as I decide which one to get & it arrives

 

[halfempty]

@halfempty Well that might have been on the first batch of the YFTK's the ones that said "Hadaly" on the base with the plastic insulator. Either way if you don't dry burn your coils too hot you shouldn't have any issue with it melting if it is not PEEK. I went through the whole YFTK Entheon thread on FT and quite a few mention an off taste with it. So it will probably need a full tear down and good wash. The post insulator does not look to be the standard peek color that we are used to on other attys.

Thanks for the clarification, but for the sake of "safety" I think I should order another one. [emoji5]

Quick someone post some Rayon, too much OT talkin's!

Don't worry, they'll both be wicked with rayon. [emoji3]

 

[stols001]

Rayon still going strong for me! I am very grateful to the thread and its members

Anna

 

[Heartsdelight]

Rayon still going strong for me! I am very grateful to the thread and its members

Anna

 

[Heartsdelight]

I finally decided on the SXK Entheon from FT. Thanks @TrollDragon for all your help
Was tempted to get the no name but, I figured it would be safer to go with the one you’re happy with

 

[TrollDragon]

I finally decided on the SXK Entheon from FT. Thanks @TrollDragon for all your help
Was tempted to get the no name but, I figured it would be safer to go with the one you’re happy with

Congrats! I hope you love it, it's head and tails over the Hadaly.

 

[markfm]

Entheon looks nice, but I think I'll stay with the Wasp Nano for now -- just a sweet little single coil flavor chaser. Easy build/install, and my twisted 26 kanthal coils have no problem being stuffed with rayon wick. It works great on the pulse bf (soft bottle and large cutout make squok control easy -- I did originally over-squonk the nano on other mods, tactile feedback is much better on the pulse).

Rayon contnues to be an it-just-plain-works-well wick for me. I was really lucky to find out about it soon after I started building my own coils, since my cotton wicks were pretty consistently poor