Rebuildable Tank Atomizers - An Anthology, Pictorial, Builds and Reviews.
- Thread starter sedge
- Start date
- th_trl_thread_readers 0
- Status
Here are all the atomizers that I have...... Granted , some of them have "twins" and in the case of the Ody is one of "sextuplets", Its the sum of almost 3 years of collecting?
BTW, GP and GUS parts are compatible..... If you look you can see some intermingling..... On the polished GUS 2.2 tube , I have GP top cap and switch just for looks, I dont know if it would be safe to use that way, as I dont know if a battery blew , if there would be venting.....
Excellent and beautiful collection anavidfan! Fine use of the cigar case as well. Churchill case no?
Nope , I think it was for fountain pens..... got it a long time ago and it was full of bracelets.... Now that I no longer have all those , I can put my more precious items in it....
They have some at Amazon that look just like it but in "leatherette" for 50ish? this like the one on Amazon has 2 layers... Under I put all my duplicate atties and bits and bobs for quick change out....
They have some at Amazon that look just like it but in "leatherette" for 50ish? this like the one on Amazon has 2 layers... Under I put all my duplicate atties and bits and bobs for quick change out....
Anavid, gorgeous!!! That case looks like it was made for mods and attys too, lol
BTW, even though I've had a DNA40 device since October, I've only built a handful of TC builds.
In light of the M-Class coming on Friday I decided I would give TC the old college try (not that my experience was bad, but working with the 28ga annealed and the size of the coils needed was ridiculous, never got around to ordering different ga of nickel either, and tempered wasn't available in nonindustrial quantities ). My fingers didn't appreciate the sub-200 mesh, and I'm not as adept at rolling as Sedge Plenty of people use and like 300/400 for feeders, and the 350 I tried once worked just fine too
Well, I just ordered some annealed nickel from StealthVape,...28ga, 29ga, 30ga, and even grabbed the tempered nickel ribbon wire, lol. I also grabbed some of their mesh, 300 and 400, for FeV feeder wicks (heard they got some top notch mesh too).
Well, it'll take at least a week or two for it to get here, but when it does, rest assured I'll be trying out TC in some of the RTAs (and I bring it on back like I always do, lol )!!!
Again, Anavid, love that picture, what a beautiful collection captured perfectly
BTW, even though I've had a DNA40 device since October, I've only built a handful of TC builds.
In light of the M-Class coming on Friday I decided I would give TC the old college try (not that my experience was bad, but working with the 28ga annealed and the size of the coils needed was ridiculous, never got around to ordering different ga of nickel either, and tempered wasn't available in nonindustrial quantities ). My fingers didn't appreciate the sub-200 mesh, and I'm not as adept at rolling as Sedge Plenty of people use and like 300/400 for feeders, and the 350 I tried once worked just fine too
Well, I just ordered some annealed nickel from StealthVape,...28ga, 29ga, 30ga, and even grabbed the tempered nickel ribbon wire, lol. I also grabbed some of their mesh, 300 and 400, for FeV feeder wicks (heard they got some top notch mesh too).
Well, it'll take at least a week or two for it to get here, but when it does, rest assured I'll be trying out TC in some of the RTAs (and I bring it on back like I always do, lol )!!!
Again, Anavid, love that picture, what a beautiful collection captured perfectly
Last edited:
Funny how lighting can make things look better or worse than they actually are...... My MODs are lovingly used and used...... you can see many surface scuffs if you really look at them.....
I kinda like those "love scars"Here are all the atomizers that I have...... Granted , some of them have "twins" and in the case of the Ody is one of "sextuplets", Its the sum of almost 3 years of collecting?
BTW, GP and GUS parts are compatible..... If you look you can see some intermingling..... On the polished GUS 2.2 tube , I have GP top cap and switch just for looks, I dont know if it would be safe to use that way, as I dont know if a battery blew , if there would be venting.....
Is that a GP Paps 2.5v switch on the Gus 22 tube? If so, you might want to be real careful with that setup. The GP Paps 2.5v switch is not designed to vent, the vent holes are on the battery tube. The Gus tube does not have vent holes like the GP Paps tube.
Thats what I thought, I have not actually used it that way..... When I want to use that tube I switch out the matte 2.2 tube Venting holes are a MUST !!!!!!! Im glad you brought that up..... I use the top caps of the GPs on the GUS if Im using a 510 air intake atty..... I figure a top contact with a Fuse might not like all that moisture.....
Oh BTW.... what about the PAPs 3 switch?
Venting holes are a MUST !!!!!!! Im glad you brought that up..... I use the top caps of the GPs on the GUS if Im using a 510 air intake atty..... I figure a top contact with a Fuse might not like all that moisture.....Oh BTW.... what about the PAPs 3 switch?
I'm of the opposing group I guess. Sure, I like elegant looking atties but function over form for me, every time. And quite honestly, I actually like the industrial look of the FeV. Yeah, I'm that guy.
The GP Paps v3 switch is vented, if that's what you're asking. All 22mm Paps versions prior to the v3 have vent holes in the tubes because the older switches weren't designed to vent.
Thats what I thought, I have not actually used it that way..... When I want to use that tube I switch out the matte 2.2 tube
Oh BTW.... what about the PAPs 3 switch?
As Firestorm already mentioned, the V3 switch is vented and will work with the GUS tube. Good point about fuse in the GUS and moisture, i hadn't thought about that.
I tend to use my Odysseus V2 alot and they produce a LOT of condensation........ I just wonder how the fuses would fair with that much moisture.......
Hmmm, thinking maybe I should stock up on fuses just in case.....Thanks Fa-Q
The Tullu RTA
I have one of these on the way from a group buy. Can't imagine it being better than the Monster V2, but it was inexpensive so i figured why not give it a try.
WOW!!!
While I am going to be waiting another week for the tempered nickel, the M-Class showed up today. Cmparing it to my S, YiHi has improved it in every single aspect. It has a little more heft to it, which feels really good in hand. They've fine a great job at improving the face, rounding out the corners, and getting the sleeve a perfect fit.
What was already my favorite regulated mod, is now that much better.
Once the tempered nickel arrives I'll be able to finally conjugate the TC to the DNA40, looking forward to that.
Oh yeah, the TC builds will be in RTAs
While I am going to be waiting another week for the tempered nickel, the M-Class showed up today. Cmparing it to my S, YiHi has improved it in every single aspect. It has a little more heft to it, which feels really good in hand. They've fine a great job at improving the face, rounding out the corners, and getting the sleeve a perfect fit.
What was already my favorite regulated mod, is now that much better.
Once the tempered nickel arrives I'll be able to finally conjugate the TC to the DNA40, looking forward to that.
Oh yeah, the TC builds will be in RTAs
It's a great device. In my opinion, build quality is superior to Vapor Shark, Vapor Flask, Hana Modz, etc. and the SX350J is superior to DNA40. It's been absolutely rock solid for me, not a single issue or complaint so far. Hope to see more custom mod makers move to the SX350J. Temperature control is a lot less finicky on the SX350J, and 40 watts from the DNA40 is on the verge of being underpowered.
Last edited:
Couldn't help myself..
..ordered the new B-Deck for the SqR (looks perfect for large TC builds and people seem to be really like it so far).
While on C9, I saw the bell cap and nano chimney, and I thought of how sexy it would look, and my wide eyes got the better of me. I still love my SqR so much, so I'm very much looking forward to spicing things up a little
..ordered the new B-Deck for the SqR (looks perfect for large TC builds and people seem to be really like it so far).
While on C9, I saw the bell cap and nano chimney, and I thought of how sexy it would look, and my wide eyes got the better of me. I still love my SqR so much, so I'm very much looking forward to spicing things up a little
Congrats...and that is a gorgeous mod right there, oooweee
The GT2 has been one of my most used attys since it's arrival, it's such an awesome RTA. Great flavor, great wicking, limitless airflow, and can handle higher watts with ease for those that like a warmer vape.
If you get a chance though, grab a 3.2 bushing, it's definitely a worthwhile addition.
- Status
Similar threads
- Locked
