Rebuildable Tank Atomizers - An Anthology, Pictorial, Builds and Reviews.

[HBcorpse]

Well...

I certainly did not ever expect to be interested in a “drop-in” aka “factory” coil tank again...

The Trillium by Eden Mods is nice, uses the Atlantis family of coils. I don’t use it often, because I’m not a huge fan of Aspire coils, although I’d take them over Kanger coils any day.

The Keras by Atmizoo is VERY nice, uses the Atlantis family of coils, but also has a super easy rebuildable deck option. Gets rare use, but still a very nice tank to vape.

———————————

And then we have the EVO by DDP Vapes.

http://www.vapesbyenushi.com/hardware/ddp-vape-ddp-evo-starter-kit/

This tank (so far) has really surprised me.

Very good flavor reproduction, outstanding vapor production, and easy to use.

The coils literally slide in. No threads.

Top fill, or bottom fill, whichever you prefer.

The factory coils are rated at 0.5 ohms, and are labeled as “best between 16-21 watts”...

I’m running it at 25 watts, and it’s very nice.

So, budgets (and availability) willing, I’m recommending this tank.

The starter kit comes with 9 coils total, in the form of two 4-packs and one coil installed.

Fat bag of spare O-rings (this tank has a surprising amount at play), drip tip, and drip tip adapter.

Bought from Vapes By Enushi, and their customer service has been fantastic.

8/10 recommended.

-2 for being a factory coil (I pretty much only trust my own builds)...

 

[HBcorpse]

Howdy group!

Anyone know of any SHORT tanks that use glass, and have an MTL draw?

I’ve got my Kayfun Prime on the tightest draw, and it’s great...

But it’s too tall.

All the aftermarket kits (SteamTuners, etc) have plastic tanks.

Problem is, I’m using a lemon flavored juice...

Kayfun Prime is listed at 45.5mm without drip tip...

Looking for something much shorter, and my Google-fu isn’t landing any hits.

Thanks in advance!

 

[NZtechfreak]

Dvarw. From memory in 2ml form 27mm to top of atty (+drip tip height on top of that). Maybe shorter again with Steam Tuners kit. Has an ultem tank section option that should be fine with your glass cracker juice.

 

[ToolmanTexas]

Dvarw. From memory in 2ml form 27mm to top of atty (+drip tip height on top of that). Maybe shorter again with Steam Tuners kit. Has an ultem tank section option that should be fine with your glass cracker juice. View attachment 765053

Agreed, Dvarw w Ultem is a good option.

Glass option for the good, ol' KFL:
$4.31 Replacement 316 Stainless Steel + Glass Tank for Lite Five Pawns RTA at FastTech - Worldwide Free Shipping

 

[HBcorpse]

Dvarw. From memory in 2ml form 27mm to top of atty (+drip tip height on top of that). Maybe shorter again with Steam Tuners kit. Has an ultem tank section option that should be fine with your glass cracker juice. View attachment 765053

I actually have two DVARW’s, the KHL Ultem tank section, and the Steam Tuners Ultem kit (in medium and small)...

I guess I never thought about using that, cuz I’ve never tried Ultem against a tank cracker!

I know there’s no guarantees in life, but have you had any experience with tank crackers working fine in Ultem tanks?

Agreed, Dvarw w Ultem is a good option.

Glass option for the good, ol' KFL:
$4.31 Replacement 316 Stainless Steel + Glass Tank for Lite Five Pawns RTA at FastTech - Worldwide Free Shipping

Wow. I never knew there was a tank like that for a KFL...[emoji848][emoji848][emoji848]
Veeeeery interesting.


THANKS FRIENDS!!!

 

[NhayLoneLy]

Pico V2 RTA

I want to make a cap of it by 3d printing, but i don't know where to talk about that in this forum, help me please ((

 

[vapdivrr]

Pico V2 RTA View attachment 769929
I want to make a cap of it by 3d printing, but i don't know where to talk about that in this forum, help me please ((

Maybe the modding forum?

 

[vapdivrr]

Howdy group!

Anyone know of any SHORT tanks that use glass, and have an MTL draw?

I’ve got my Kayfun Prime on the tightest draw, and it’s great...

But it’s too tall.

All the aftermarket kits (SteamTuners, etc) have plastic tanks.

Problem is, I’m using a lemon flavored juice...

Kayfun Prime is listed at 45.5mm without drip tip...

Looking for something much shorter, and my Google-fu isn’t landing any hits.

Thanks in advance!

The only rta I can think of is the erlkonigin in short mode which is about 30mm in height. I vape this tank and it has a glass tank, but it's not super tight and not even sure if there even available anymore.

 

[vapdivrr]

Dvarw. From memory in 2ml form 27mm to top of atty (+drip tip height on top of that). Maybe shorter again with Steam Tuners kit. Has an ultem tank section option that should be fine with your glass cracker juice. View attachment 765053

Just measured my dvarw with ST'S tank and it's 27mm, so it seems the same height as stock

 

[NZtechfreak]

Just measured my dvarw with ST'S tank and it's 27mm, so it seems the same height as stock

Ah, right. Thanks for finding that out.

 

[qorax]

 

[vapdivrr]

Looks nice!

 

[HBcorpse]

Ok this isn’t exactly high-end...

But...it sure is INTERESTING to say the least.

This is a 19mm “adapter” that allows popular pods to be used on a 510 mod.

I’m a JUUL and Phix user, for my shirt-pocket friendly devices...Provape Radius and Billet Box devices in the pants pockets.

So far, it’s been pretty decent to use!

JUUL pods run at 5 watts, and Phix pods at 8 watts.

They perform normally, except now I have a MUCH larger battery under them, and a far more reliable device running them.

And it was only $15 shipped.

Made by Limitless Mod Co

Called the “pod mod adapter”

Pretty neat!

 

[qorax]

 

[ToolmanTexas]

Reminds me of many of the features of Gus Phenomenon. Thanks for the review @qorax

 

[qorax]

RDA + RTA / GG Amadeus

 

[qorax]

 

[qorax]

 

[Rockford]

Just ran across this at one of the online shops, Special Edition, they call it "Sunrise"

 

[TheotherSteveS]

Hi all! New Years resolution to spend more time on my favourite thread of all time anywhere. Hope everyone is well. Still love my tanks!!