- Status
A heads up for the restricted/mtl gang. Just seen a post from a uk steam crave tester and a new 23mm lite mtl restricted dtl single coil aromamizer will be out this month.
Should be great for those who enjoy higher vg liquids.
Should be great for those who enjoy higher vg liquids.
Well new one to the long List
BYKA v8 RTA a Russian made RTA well Belarus
or you cloud go YFTK for the clone byka v8 rta, nano 3ml standard 4-5ml,
Its a good one can do both RDTL or MTL ,
I have been vaping on v7 for past 15 months daily.
The V8 RTA at its most open is much more restricive draw
I have now found a Russian modder whom makes ultem tanks for it,
Have been vaping on V8 for a few days now, and I do like it a lot
It has fixed the big flaw of V7 RTA where base sometimes stayed on mod when removing the tank,
also threads for top fill are great there are less of them and turn the right way. Ie..
It closes the JFC chamber when taking off to refill,
22mm v8 RTA , smaller chamber so tastier vape,
Than the V7 I have loved was 23mm,
The V8 is was the last RTA I have been looking to buy since I believe I have enough now,
Fits mods like atto very nicely, once my Ultem tank part arrives for it will be very content. Since i have a quite a few RDTL vapes now, this one if you like Restiction on the draw fits most needs AFC and A range of airflow reducer inserts right down to a very tight MTL
if so wish via modders online stores,
This one im very happy with finally, there is also the larger ultem tanks available at online modders request.
So can use most juices even tank crackers,
BYKA v8 RTA a Russian made RTA well Belarus
or you cloud go YFTK for the clone byka v8 rta, nano 3ml standard 4-5ml,
Its a good one can do both RDTL or MTL ,
I have been vaping on v7 for past 15 months daily.
The V8 RTA at its most open is much more restricive draw
I have now found a Russian modder whom makes ultem tanks for it,
Have been vaping on V8 for a few days now, and I do like it a lot
It has fixed the big flaw of V7 RTA where base sometimes stayed on mod when removing the tank,
also threads for top fill are great there are less of them and turn the right way. Ie..
It closes the JFC chamber when taking off to refill,
22mm v8 RTA , smaller chamber so tastier vape,
Than the V7 I have loved was 23mm,
The V8 is was the last RTA I have been looking to buy since I believe I have enough now,
Fits mods like atto very nicely, once my Ultem tank part arrives for it will be very content. Since i have a quite a few RDTL vapes now, this one if you like Restiction on the draw fits most needs AFC and A range of airflow reducer inserts right down to a very tight MTL
if so wish via modders online stores,
This one im very happy with finally, there is also the larger ultem tanks available at online modders request.
So can use most juices even tank crackers,
Attachments
Apologies bud yes. It's very good indeed. Had a tootlepuff (as they say round these parts) and liked it very much. Its on the list.
That’s excellent to hear! We miss you when you’re awol!What's the cost?
I'm back btw. Doing fine..
Just checked tracking on my China orders... Fresia and replacement glasses get here Monday. Double Barrel v3, Tuesday. One hastur is over the ocean somewhere, and FT has yet to get the black one in and ship it
. Impatience is getting the worst of me, I have half a mind to see if I can find one stateside.
That’s excellent to hear! We miss you when you’re awol!
Just checked tracking on my China orders... Fresia and replacement glasses get here Monday. Double Barrel v3, Tuesday. One hastur is over the ocean somewhere, and FT has yet to get the black one in and ship it
I haven't checked tracking on my Fresia lately.. I'm in give up mode. That Hastur cap I ordered a couple weeks after I ordered that Fresia and have it in hand already.
Awesome on the double barrel.. those are awesome. I'm thinking of picking up a Revenant Cartel... I don't have one and those are nice looking. I haven't pulled the trigger yet though, I worry when we can't pick color.. scared of something horrid. haha
I have 3 of the 2.1s and a Detonator. At my wattage, I get 3+ days on a dual battery. And the DB is small for a dual (aka pocket and hand friendly). I have the same waffling going on with the Revenant. I’m too picky about color. I keep hoping one will show up in the classies. I think Efun had them in their US warehouse at a decent price.
Can’t find a Hastur anywhere in the US. Checked all my usual spots after a google. Any ideas, gang?
The authentic shipped with G&S PayPal around 156 USD for full standard inc 3 different tank piece's,from Vapesystems RUWhat's the cost?
I'm back btw. Doing fine..
But price varies was on what you want as they offer different packages that's s full Standard so most expensive .
They offer nano and just basics and parts individually too.
So depends on if want full set up or not,
Yftk clone around 27 usd. + 3.50 shipping, thats for nano pc + half ss and 1 standard pc and both chimney sizes,
Or 21usd for nano kit 1 pc 1 half SS, nano chimney
Standard upgrade parts
sold for Yftk version are 7.59 usd 1 chimney 1 pc standard,
Some try clone first
some dont want clone.
options there,
but YFTK is usually a good clone only thing is authentic use polished PC and uv glue its half SS pc tanks ,
Where as clone is just threaded together un polished PC,
The ultem tank alone is 27 USD and 6 shipping,
From a Russian modder,
I have only just ordered so will need time receive and to try it, but at least option is there for all juice types,
Seen one for v7 too from Italian company but they say 30-euro just for shipping,
not inc the v7 ultem price ouch ?
Sent from my ONEPLUS A3003 using Tapatalk
Last edited:
Neither can I. The Cthulhu mod store has them in stock, but I have no idea where they are located...
Hastur MTL RTA
Please feel better soon! We’ll miss you while you’re gone.
Edit: glad you’re back!
Last edited:
They are located in, and shipped from, China.
The shipping time was about the same as Fasttech when I ordered direct.
Last edited:
That’s excellent to hear! We miss you when you’re awol!
Just checked tracking on my China orders... Fresia and replacement glasses get here Monday. Double Barrel v3, Tuesday. One hastur is over the ocean somewhere, and FT has yet to get the black one in and ship it
I love how you are as impatient as I am
We need some of @Opinionated 's patience
And @DPLongo22 - since your the new expert after the smidgie (sjmy) and sexy (sxk) doggy RTAs. How DO you pronounce cthulhu hastur?!?!
- Status
Similar threads
