Setting up a couple of identical atties with a single setup difference between them and vaping them alternately for a few days or a week or two is something I do when I really want to see what difference that variable makes for me. I've learned a lot over the years about what affects my vape this way. I don't think it's necessary to do it with 4 or 5 atties at a time, even 2 at a time will give you very good information that can really help.
I've also found that vaping them for a while is important. First impressions can be deceiving as sometimes differences between setups change as the wick and wire break in (gunk up), or over a few clean and rewickings.
I also use the same juice in both as I do this. If I want to see how another juice affects the results I switch to juice #2 in both after I've got a good handle on juice #1.
This is an experiment done with only one tester, but that tester is you and in the end you're the only one who matters
Setting up a couple of identical atties with a single setup difference between them and vaping them alternately for a few days or a week or two is something I do when I really want to see what difference that variable makes for me. I've learned a lot over the years about what affects my vape this way. I don't think it's necessary to do it with 4 or 5 atties at a time, even 2 at a time will give you very good information that can really help.
I've also found that vaping them for a while is important. First impressions can be deceiving as sometimes differences between setups change as the wick and wire break in (gunk up), or over a few clean and rewickings.
I also use the same juice in both as I do this. If I want to see how another juice affects the results I switch to juice #2 in both after I've got a good handle on juice #1.
This is an experiment done with only one tester, but that tester is you and in the end you're the only one who matters
Thanks for feedback. Always helps to have someone’s guidance or suggestions especially if they have done it previously.
well that’s just CRAZY!!! Lol! “They” must not be building it the “right” way lol!! Seriously though- I’ve almost stopped dripping the flavor is so good in the Zeus. Of course I was also bedridden lately but still since I’ve been up and about more I’m still using it more than an rda.
as a matter of fact I have 5 mods on my nightstand. One has an rda, 3 have the Zeus and one has a new kelpie. Love those Zeus’s!
So despite my mailman never having scanned the mail as being delivered I did get my stuff today.
I only had a chance to clean my stuff and then I put it away and then of course I just had to pull one of them out to give it a go. I think I paid like $6 on FastTech and it's definitely an older product but there is something they're calling UD Goblin BG.. now I wanted to know what the bloody heck a BG Goblin was and it was cheap...so purchased.
If anybody doesn't know apparently at least to FastTech the goblin mini V3 with the extender tank is called the BG. I swear I searched for the UD Goblin BG on every forum and I saw nothing at least nothing written in English.. I know I'm late to the show and it's an old tank but I like it.
Good flavor it's easy to build on, it's easy to wick, doesn't leak... all of that is probably first build luck I have a tendency to build things perfectly the first time and then never again.
Tomorrow the Bellus and hopefully eventually I'll figure out what the heck to do with that Panglao rdta!
I only had a chance to clean my stuff and then I put it away and then of course I just had to pull one of them out to give it a go. I think I paid like $6 on FastTech and it's definitely an older product but there is something they're calling UD Goblin BG.. now I wanted to know what the bloody heck a BG Goblin was and it was cheap...so purchased.
If anybody doesn't know apparently at least to FastTech the goblin mini V3 with the extender tank is called the BG. I swear I searched for the UD Goblin BG on every forum and I saw nothing at least nothing written in English.. I know I'm late to the show and it's an old tank but I like it.
Good flavor it's easy to build on, it's easy to wick, doesn't leak... all of that is probably first build luck I have a tendency to build things perfectly the first time and then never again.
Tomorrow the Bellus and hopefully eventually I'll figure out what the heck to do with that Panglao rdta!
Thanks That one is my favorite. I have quite a collection that friends have given me over the years.
The Bellus is supposed to be another pretty good tank as well from UD. I've still got two sitting here that I haven't had a chance to build yet.
Don't forget the feedback on that one, I'm very interested
Last edited:
No. I have heard they are good pets. It's illegal in Nevada to keep them as pets otherwise I would. It would be funny to see peoples reactions when you took one for a walk.
The wasp is not at the top end, imho, for flavor. But I haven’t had any leaking from them. I looked at the SMM but for some reason ruled it out. Can’t recall why.
A little bit of an itch has been scratched for now
I saw that Sourcemore had some more Rose Finch's after being out of stock Again!
So I thought I better get the Copper one and now I'll have the whole set
asMODus Rose Finch Mechanical Mod single 18650
And I thought I would give the new Asmodus RTA a try, the Anani MTL RTA!!
Should be interesting
asMODus ANANI MTL Rebuildable Tank Atomizer Φ24mm 5.3mm Deep Juice
Let us know what you think of the Anani please.
I like them. I guess a lot of people don’t like so much air. I do, I like Lincoln Tunnel sized air flow lol.
I most definitely will. I'll be very interested to see how it goes myself so it shall be a priority build as soon as it arrives.
The airflow definitely does make me curious, too tight?
or just right?The main thing is it was cheap and It's Asmodus
I’m getting frustrated 
I was perusing vape sites a couple of months ago and saw a variable voltage mod that I kind of thought was interesting.
I had my unfortune “event” that had me a bit under weather and now I can’t find it again.
I think it was made by ijoy because it looks very similar to the IJOY Zenith 3 vv except that the dial was smaller and simpler.
Anyhow I can’t find it. As a matter of fact there doesn’t seem to be an over abundance (like almost none) of vv mods available.
I thought it would be a great addition to the Vape Stash because it looks like there are less things to breakdown on it.
so..... if anyone knows of any VV mods being sold currently or the one that sounds like the one I sawpreviously then I’d love to hear about them or it.
Thanks Shinys!!
I was perusing vape sites a couple of months ago and saw a variable voltage mod that I kind of thought was interesting. I had my unfortune “event” that had me a bit under weather and now I can’t find it again.
I think it was made by ijoy because it looks very similar to the IJOY Zenith 3 vv except that the dial was smaller and simpler.
Anyhow I can’t find it. As a matter of fact there doesn’t seem to be an over abundance (like almost none) of vv mods available.
I thought it would be a great addition to the Vape Stash because it looks like there are less things to breakdown on it.
so..... if anyone knows of any VV mods being sold currently or the one that sounds like the one I saw
previously then I’d love to hear about them or it. Thanks Shinys!!
OMG the Manifesto! I forgot I wrote that!
LOL I also have broken EVERY single rule on the manifesto. I suck.
I wish that damn "Blow up the government Saw Alinski dude Communist manifesto had broken his OWN manifesto rules a TON more we would be much further than a communist government like, than we are now.
That sick feeling in the pit of my stomach as I purchase comes to mind... A little frequently as it happens. Man I am still glad I got a couple cold steel 100 ephros they are the bomb.
I was so innocent. But not bad for a first stab. I think my NEXT manifesto may be "How to deal with, as a crusty old person, the State of Affairs in Society Today and the Generations Below You without Getting Blown up or Shot."
That one's complicated!
Anna
LOL I also have broken EVERY single rule on the manifesto. I suck.
I wish that damn "Blow up the government Saw Alinski dude Communist manifesto had broken his OWN manifesto rules a TON more we would be much further than a communist government like, than we are now.
That sick feeling in the pit of my stomach as I purchase comes to mind... A little frequently as it happens. Man I am still glad I got a couple cold steel 100 ephros they are the bomb.
I was so innocent. But not bad for a first stab. I think my NEXT manifesto may be "How to deal with, as a crusty old person, the State of Affairs in Society Today and the Generations Below You without Getting Blown up or Shot."
That one's complicated!
Anna
I most definitely will. I'll be very interested to see how it goes myself so it shall be a priority build as soon as it arrives.
The airflow definitely does make me curious, too tight?
The main thing is it was cheap and It's Asmodus
So far every Asmodus atty I’ve bought has had a pretty restricted air flow for me. I was really excited to get the C-4 but I was just too restricted same with the .blank. And the same with the RDTAs and sub ohm attys. And the other ones the sell also look like their pretty restricted if not an airy MTL (to me).
So like Daniel I’m also very interested in your thoughts about the air flow as well especially if you can compare it to other attys.
I really like the Ephro CS 100 as well. If I can find it on sale again I wouldn’t mind adding another to the “stash”.
Actually I need another term for “stash” because my stash was completed possibly a year ago
!!Shinyitis Syndrome
!!!Similar threads
- Locked
