gsmit1

Ultra Member
ECF Veteran
Apr 19, 2018
1,020
3,890
61
Rewicked a couple rda’s before bed and half asleep i took a puff off my Ni90 0.1 ohm coil on my vindicator without the cap. Burnt the crap out of my lips ...

I did this 4 5 months ago as well. Said never again but oh no I’m just stupid
OW!!
 

Blitzdonlife

Ultra Member
ECF Veteran
Apr 24, 2012
2,370
14,928
Central Texas
Rewicked a couple rda’s before bed and half asleep i took a puff off my Ni90 0.1 ohm coil on my vindicator without the cap. Burnt the crap out of my lips ...

I did this 4 5 months ago as well. Said never again but oh no I’m just stupid
I've done this before too, you're not stupid Ricky just tired. Get some some sleep bud.
 

lupinehorror

bròn
Supporting Member
ECF Veteran
Verified Member
Jul 11, 2017
3,265
22,602
Dunblane
morning all.
Rewicked a couple rda’s before bed and half asleep i took a puff off my Ni90 0.1 ohm coil on my vindicator without the cap. Burnt the crap out of my lips ...

I did this 4 5 months ago as well. Said never again but oh no I’m just stupid
managed to do that once myself. get some balm/chapstick on there.
 

lupinehorror

bròn
Supporting Member
ECF Veteran
Verified Member
Jul 11, 2017
3,265
22,602
Dunblane
IMG_20200204_062305.jpg
 

Pigs

Vaping
ECF Veteran
Jun 7, 2019
7,425
53,314
Sydney Australia
Agree 100% :wub:

I've been vaping 100% my own recipes for the past 9 months. I'd happily vape one mix, all day every day - so finding and loving 5 different ADVs has been a huge step for me.

What I love the most about DIY and creating mixes, is the creativity side, and the experimentation side. Plus you don't need 100s of concentrates to succeed at DIY. Out of my 80 flavours - only 25-30 are my essential staples.
Jeez Louise...80!
My favourite new ADV juice is based on what I call "Ange's Custard" (a recipe you posted a while back in reply to a post of mine looking for good DIY custards). I tweaked it a bit and added a touch of raspberry (CAP). It's mild but yummy.

EDIT: The nic is 100mg/ml 50/50 PG/VG
Pig's Raspberry Custard.jpg

Apologies for straying from Shinyitisness (again)
 
Last edited:

Pigs

Vaping
ECF Veteran
Jun 7, 2019
7,425
53,314
Sydney Australia
For those getting into stacked series mechs, remember things are calculated differently.
View attachment 867581

This is a helpful guide to keep in mind when deciding on your build. Decks that allow you to build a series coil help in keeping the resistance in a decent range and hit like a steam machine. Of course a properly built single coil can also be a major heavy hitter as well. Just make sure your atty of choice has decent airflow so things don’t get too toasty.

Oh, those figures are based on the draw on a 20A battery. With a 30A battery you can build a bit lower, matching the battery to the amp draw expected. But still, in series even. 30A battery can get maxed out pretty easily.
Eskie that is so useful. Having it laid out in graphic form like that is gold. Saving to my desktop now. Thanks!
 

Letitia

Citrus Junkie
Supporting Member
ECF Veteran
Apr 2, 2017
26,133
138,736
West Frankfort, IL
Hey there I want to start getting stuff form the broke vaper to do DIY.

Could you tell me what I should get to start me off?freebase nic in VG base would probably be good. Then what else do I need? Just flavour and the PG then syringes etc?
Nic in pg base is much easier to work with. Easier to pull up into a syringe.
 

Pigs

Vaping
ECF Veteran
Jun 7, 2019
7,425
53,314
Sydney Australia
Nic in pg base is much easier to work with. Easier to pull up into a syringe.
All my newer nic is 100 pg based but I'm using my 4 year old 50/50 nic first.

EDIT: In Aus it isn't legal to buy juice with nic content so we've always had to add nic to either "doublers" or 0% nic juice. So even being new to DIY I'm used to storing/thawing/mixing nic.
 
Last edited:

virm

Ultra Member
ECF Veteran
  • Oct 27, 2019
    1,735
    10,464
    This is a respost of mine from another site where somebody was asking about why anybody would want a stacked tube.
    ==========================

    A stack gives you double the voltage (but the same amperage) as a single and allows you to send some serious power to your coils safely. Even though you still have the same available current as a single, the additional voltage lets you pull less of it for the same wattage.

    So for instance I can say, put a .3 build on one and get roughly 190 or 200 watts while still only pulling 26 or 27 amps from the batteries.

    Why would anybody want to do that? Well, if you enjoy a "warmer" vape, this is a great way to get one. You can also build higher of course and bring that heat down as you please.

    My Vaporz Could XXX has a .3 build on it and with a pair of 2070C or 20S it is an absolute monster.

    It's perfectly understandable why many folks wouldn't want that and it's certainly not the only thing I vape, but it is fantastic when looking to REALLY fill your lungs up.

    fill their lungs? are they 180cm tall?
    warmer? at least say hot_ 65w is warm!

    I used to feel the same way. I only tried a mech because, with the bans coming, they ought to last with so little that can go wrong with them.

    I started with a Luna, because it’s protected. But I still had to learn how to build for it, how to calculate, how to use it safely. If I did anything wrong, it would blink and alert me. I feel quite comfortable with them now, although there is still a lot I need to learn.

    That’s what I love about the folks on this forum. They never make me feel like an idiot when I ask a question, no matter how pedestrian it might be. I probably don’t need a stack, I may never seriously use them, but I do want to know how to just the same.

    agreed. nice that everyone rememebrs what it was like before experience...

    I'm one who uses coilers, including the top part to spin the wire. I find them convenient.

    I have a CM set, I believe v3. My stock coil is typically 2.5mm ID, though I'll do 2mm or 3 mm depending on the particular application.

    I recently picked up some Kuro Koiler sets from ft. Each has a fixed post; I got them in 2, 2.5, and 3mm diameter, in different colors. To me they're even more convenient than the CM set, no futzing around swapping spindles.

    thanks
    how come these guys come in packs of the same size?

    Got some new shiny stuff today. Got a new Revenant at my local shop for $20.00, including the Samsung 40T. Also got a Uwell Evdilo for $50.00, including 2 Samsung 40T's. The Dead Rabbit SQ and the hand made keychain fob came from my friend @icepickmaker84. Thank you so much Nick!

    View attachment 867627

    Silver Evdilo picking up desk color.
    View attachment 867629

    mrmrm
    i'm still not used to your new avvie...

    My eyesight isn’t spectacular after dark (yes, I have the lamps on). Is there a off/bypass switch inside like the Pulse mech?

    lol
    reminded me of the rewicking craze last couple of weeks... did it all under table lamp, sometimes with the main light turned off as it was irrelevant. must have looked a bit insane from the window

    Going on 2 years with this one. I want another nitecore i4. Having 2 slots can be rough as forgetful as I am.

    i've thought about moving to 4slot and nitecore from my xtar vc2s... but i don't, when i read the cell-life recommendations it said better not to leave too long with a high charge without using and better to let them rest before and after use... the 2 slot is helping me regulate the use and shift each day or 2 from a the 2 singles i use on nunchaku to the 2sets i use with the vprsogen. i also always stop using the battery when it reaches 40-50% and put in a fresh one (might have started that because i misunderstood the 'don't discharge to under 2volts rule, if i understand correctly, when these regmods say battery empty, that means they're at 2.5volts, and the rec was addressed to mechers)
     

    Pigs

    Vaping
    ECF Veteran
    Jun 7, 2019
    7,425
    53,314
    Sydney Australia
    Got a txt from Australia Post this afternoon saying a delivery is due from Xiaofeng Wang tomorrow.

    I wracked my brains...no shinies due from China...then a thought struck me - maybe Don's coils are due earlier than expected and his real name is Wang or even Xiaofeng? (sorry Don ;))

    Then I remembered...THESPACESHUTTLELAMP!

    If that little gem does come expect multiple photos this time tomorrow.
    :rickroll:
     
    Last edited:
    • Love
    Reactions: madstabber

    DeloresRose

    Vaping Master
    ECF Veteran
    Apr 25, 2014
    8,612
    63,136
    toledo ohio
    Jeez Louise...80!
    My favourite new ADV juice is based on what I call "Ange's Custard" (a recipe you posted a while back in reply to a post of mine looking for good DIY custards). I tweaked it a bit and added a touch of raspberry (CAP). It's mild but yummy.

    EDIT: The nic is 100mg/ml 50/50 PG/VG
    View attachment 867657
    Apologies for straying from Shinyitisness (again)

    I lost count at 150 flavors. I think I have almost 200 bottles, but some are duplicates because we cannot run out of the favorites! From now on, I’m going to enter them in ELR as I get them, and I’ve been entering the ones I use every time I mix. No way I’m just going to sit down and do them all in a day.
     

    Users who are viewing this thread