Shinyitis Support Group

[Mobc1990]

I am using a pod mod and vaping at 55W,it’s a newly bought mod.The coil reads,.17 and recommended wattage at 40-70Watts.The thing is after a week of using,my upper lips a sort of getting blistered.I am still figuring out is it the position of the drip tip on my mouth is wrong and I need to learn how to inhale on this specific pod mod system

 

[the wind]

I am using a pod mod and vaping at 55W,it’s a newly bought mod.The coil reads,.17 and recommended wattage at 40-70Watts.The thing is after a week of using,my upper lips a sort of getting blistered.I am still figuring out is it the position of the drip tip on my mouth is wrong and I need to learn how to inhale on this specific pod mod system

i do not pay any attention to manufactures or young wimpier snappers say about what watts to use.just start low and work up till i

 

[Rob B.]

View attachment 877901

Not my best work, I’m going to try again with different scissors to get that trimmed close. Still, how fun!

That is so cool Delores. Would be even cooler with Scooby hanging out the window. Brings back a lot of fond memories of Shaggy and the gang. Was a favorite of mine when I was a kid. Thanks for sharing your work.

EDIT: BTW, how much are you selling them for? Maybe a trade for the tea pot?

 

[Rob B.]

I am using a pod mod and vaping at 55W,it’s a newly bought mod.The coil reads,.17 and recommended wattage at 40-70Watts.The thing is after a week of using,my upper lips a sort of getting blistered.I am still figuring out is it the position of the drip tip on my mouth is wrong and I need to learn how to inhale on this specific pod mod system

What is pod mod you are using. I have really grown to love the AIO's that are so ubiquitous now. I am gathering quite the collection of them.

 

[Mobc1990]

What is pod mod you are using. I have really grown to love the AIO's that are so ubiquitous now. I am gathering quite the collection of them.

I am using smok rpm80,I am collecting smok product

 

[virm]

i've had the tabs for a couple rda's open for a couple days now, vaping101 and a spanish site that still has hermetic....... seriously i'll do it, i'll order a third rda just to get it faster... you best make my rdas get here you best!!

 

[Rob B.]

I am using smok rpm80,I am collecting smok product

Haven't tried that that one yet, but have heard good things about it. Here are the one's I've collected so far. I have another one on the way called the Think Vape Zeta that I can't wait to get. Happy with all of them so far. The Manto has an RBA that is really nice. The Zeta is coming with an RBA, and the Q-Ultra has an RBA that I will be ordering soon. Hopefully the DotAIO and Billet Box are in my future.

Lost Vape Q-Ultra, Rincoe Manto, Aspire Mulus, Asvape Micro

This is the Think Vape Zeta. Got the Silver one

 

[charlie1465]

Morning all.

So I looked at the coil that I didn’t use that came with my red Dot, and that was a 1.6 ohm. The holes do look smaller on them. Not sure why the SE came with .7 instead, but regardless, it vapes alright. I doubt I’d like the 1.6 even though I do a little mtl occasionally. .7 is a little restricted but not horrible.

@Pigs I've made a mistake saying that the .7 ohm is MTL...I'm an idiot it's the 1.6 ohm that is tight...

Don't shoot me pigs I didn't mean it honestly

 

[Mobc1990]

i do not pay any attention to manufactures or young wimpier snappers say about what watts to use.just start low and work up till i

I think I am always thinking that my coil has had problem,in fact it is me not feeling satisfied with my Vape.I am on 3mg,there is nothing wrong with the coil as the Vape shopkeeper said.I am expecting much flavor and throat hit.Had used and thrown three coil away.Now I just want to not think of expect too much to be satisfied as long as I continue vaping and keep away from cig

The reason my coil isn’t spoil because there is still cloud coming out and no dry hits,just me expecting too much

 

[Don29palms]

Good morning EVERYBODY!

 

[charlie1465]

I am using a pod mod and vaping at 55W,it’s a newly bought mod.The coil reads,.17 and recommended wattage at 40-70Watts.The thing is after a week of using,my upper lips a sort of getting blistered.I am still figuring out is it the position of the drip tip on my mouth is wrong and I need to learn how to inhale on this specific pod mod system

That sounds like an allergy to something....is it a hot vape?

 

[chanelvaps]

I think I am always thinking that my coil has had problem,in fact it is me not feeling satisfied with my Vape.I am on 3mg,there is nothing wrong with the coil as the Vape shopkeeper said.I am expecting much flavor and throat hit.Had used and thrown three coil away.Now I just want to not think of expect too much to be satisfied as long as I continue vaping and keep away from cig

exactly! You will not get the burn in the throat you get from cigs but you will keep getting the nicotine. I craved the throat hit for a few months.

 

[lupinehorror]

@Pigs I've made a mistake saying that the .7 ohm is MTL...I'm an idiot it's the 1.6 ohm that is tight...

Don't shoot me pigs I didn't mean it honestly

think that may have been me.
said device is out for delivery. there hopefully will be vaping and pictures soon.
afternoon all.

 

[chanelvaps]

Does anyone remember any of the settings for the OG Eleaf Isticks? 20 watt. I have tried all my tanks on these things I am getting ready to send off in the mail and both of them say "check atomizer" then it occurred to me that my OHMS in all three tanks currently using, might be too low for it

 

[Mobc1990]

That sounds like an allergy to something....is it a hot vape?

It’s only 55 watts,I mean it’s 55W lol.Anyway,I vape with the drip tip directly at the inside of my lips...should have tune down the wattage as I need to find way to feel satisfied without hurting lol

 

[Mobc1990]

exactly! You will not get the burn in the throat you get from cigs but you will keep getting the nicotine. I craved the throat hit for a few months.

I can feel better throat hit if the wattage is higher,now it’s not worth bruising my front lips to get the throat hit

 

[Hightech Redneck]

Morning all.
I dont post alot of personal info or issues typically as there are more important things out there.
Just a quick driveby to keep family in yalls thoughts and prayers if you would.

We lost my mother in law early this morning to her fight with cancer. She had been staying with us under hospice care for a while now.

We are ok as we know she is no longer in pain. But its a strange time as we cant even setup a memorial or visitation given the current state of things. I think that is weighing on her as much as anything else after her mom passed.

Wanted to let yall know as has been discussed here we are like a family. But i am not one to burden people with my issues or drama. Secondarily to explain my absence recently and possibly for a bit longer.

Stay safe all.

 

[chanelvaps]

Morning all.
I dont post alot of personal info or issues typically as there are more important things out there.
Just a quick driveby to keep family in yalls thoughts and prayers if you would.

We lost my mother in law early this morning to her fight with cancer. She had been staying with us under hospice care for a while now.

We are ok as we know she is no longer in pain. But its a strange time as we cant even setup a memorial or visitation given the current state of things. I think that is weighing on her as much as anything else after her mom passed.

Wanted to let yall know as has been discussed here we are like a family. But i am not one to burden people with my issues or drama. Secondarily to explain my absence recently and possibly for a bit longer.

Stay safe all.

So glad you felt the need to share. Yes, we are family and when one of hurts, all of us hurt for them. I am sorry about the loss of your MIL. I wish for peace for your family, especially your wife.

 

[DeloresRose]

That is so cool Delores. Would be even cooler with Scooby hanging out the window. Brings back a lot of fond memories of Shaggy and the gang. Was a favorite of mine when I was a kid. Thanks for sharing your work.

EDIT: BTW, how much are you selling them for? Maybe a trade for the tea pot?

View attachment 878019

I didn’t forget about that tea pot. I tried making cookies but my hear just wasn’t in it, and love is the most important ingredient.

This design might be altered by someone who has the right software - about a $300-500 upgrade for me - and the know how - about a million projects worth of experience lol.

But there are additional bits to go with it that I’m working on now, or waiting on materials to do. There are key fobs of each of the characters, plus a Scooby snack box, and some other dangles, and a mini notebook cover.

I’ll definitely be making more of these, I don’t sell( or haven’t yet, but who knows...) but I’d gladly trade with you. Just let me practice till I get them really nice.

The vinyl colors just don’t pick up well in pictures. In person, it’s very sparkly.

 

[Rob B.]

Morning all.
I dont post alot of personal info or issues typically as there are more important things out there.
Just a quick driveby to keep family in yalls thoughts and prayers if you would.

We lost my mother in law early this morning to her fight with cancer. She had been staying with us under hospice care for a while now.

We are ok as we know she is no longer in pain. But its a strange time as we cant even setup a memorial or visitation given the current state of things. I think that is weighing on her as much as anything else after her mom passed.

Wanted to let yall know as has been discussed here we are like a family. But i am not one to burden people with my issues or drama. Secondarily to explain my absence recently and possibly for a bit longer.

Stay safe all.

I am sorry to hear this HTR. My thoughts , prayers, and regards to your wife and your family.