Shinyitis Support Group

[charlie1465]

I avoid all tv news, because I stream and it’s easy to do. And I limit what I read. Too distressing and aggravating. But I hear too many people - locals mostly - talking like everything should go back to normal right after lockdown.

Personally, I’d rather see social distancing and masks in public until there’s a vaccine and most of us have had one.

@NolaMel I've only ever used cotton, so if course that’s what’s in my bb. If I can find the video that helped me, I’ll share it.

You're bang on with keeping restrictions in place. It worries me what the idiots will do. I think a lot of people are going to be shocked when the lockdown ends because there will have to be a huge number of restrictions to prevent a second wave of infections...

Here in France masks will be a must and although it's probably important to get the economy running again restaurants won't be able to reopen so I'm guessing that all places of congregation will still be restricted and actually there won't be a feeling of back to normal for a long time....possibly until a vaccine is rolled out...

Chin up

 

[Eskie]

In honor of @AngeNZ , here's one solution when you're out of ideas of what to do.



Should be long enough to keep you occupied.

 

[NolaMel]

@NolaMel



He’s a little windy, but I did what he did and it worked for me.

Thank you! I watched one last night, and he put the chamber reducer in upside down .
I think I’m ready to give it a go....after coffee.

 

[NolaMel]

You may have seen this Mel. I base my wicking on Todd's and it's never failed. Cotton for me

Thank you. I like Todd generally

 

[Letitia]

Belated good morning Shiny's
Have plenty of tracking numbers but only Amazon is actually moving.

 

[NolaMel]

I was at 3 mgs but it wasn’t doing the job, so I’m at 6, except for pods, and those are 25 mg salts.

I moved back up to 6 too a while back. I found I was constantly vaping at 3.

 

[whodat2112]

My cats are really concerned about COVID-19.

 

[the wind]

I moved back up to 6 too a while back. I found I was constantly vaping at 3.

went from 36 to 6 in 12 or 13.when i used my first sub ohm tank. been there ever since,do i win?

 

[DeloresRose]

I think the world is going to face a slap in the face with business and corporations blaring at you to buy buy buy. If there is one thing I learned from all of this, no matter how much you have, you are not protected if you do not have your health and all that really matters in the end of it all is the health of love of family and friends. I read an article on this and would share it but it is not geared towards what we all do here and that is to over buy what our hearts desire

I agree, but as god is my witness, I’ll never let myself get down to one pair of sweatpants again! I was completely unprepared in that aspect.

 

[AngeNZ]

Morning shinies

seiously 9 and 12 you dl that??

morning and foarsyth and everything eveyrone

you ppl DL high nivc??

I'm using DL attys, but no, I MTL them @ 9mg. Possibly another reason I've had to go down again in mg is that my wattage has gone up a bit by using unregulateds

In honor of @AngeNZ , here's one solution when you're out of ideas of what to do.



Should be long enough to keep you occupied.

Watching sheep is much more relaxing than watching cracks in the ceiling
Lambs playing is ALWAYS hilarious:

 

[the wind]

we can't leave out

 

[Doffy]

Non vape. Not actually shiny. But new acquisition.

Weighted blanket. This is awesome. Mine is 9.2kg. Recommended is 10% of your body weight.

They are for anxiety and restless legs.

Mine cost $60. I think that I should have spent more to upgrade fabrics, but this rocks.

Highly recommend it to anxiety sufferers.

 

[NolaMel]

Non vape. Not actually shiny. But new acquisition.

Weighted blanket. This is awesome. Mine is 9.2kg. Recommended is 10% of your body weight.

They are for anxiety and restless legs.

Mine cost $60. I think that I should have spent more to upgrade fabrics, but this rocks.

Highly recommend it to anxiety sufferers.

I LOVE mine. Made me wonder why I waited so long to get one!

Xeta is built and waiting for an empty boro. Sadly, only have one atm, so vaping away trying to get one. Dotshell clone is ordered. I may have to go back and look in Canada for BB extras since the China stuff is creeping along.

 

[TrollDragon]

I've never used rayon so no idea about which is better. @TrollDragon might have used rayon so he may know

Rayon is all I use in RTAs and RDAs with deep wells. I don't own the Xeta so can't really give any advise on wicking, RBAs and the BB are a no for me because maintenance is too much of a PiTA.

My BB hardly sees any use these days and it still has the EUC ceramic coil installed from months ago. It's either that one or the eLeaf EC-Mesh that are my go to coils for the BB. They last for months, work great and provide simple maintenance.

I really should sell the BB off cheap and get rid of it so someone else can enjoy it. There is an issue with the DNA 60 in it where it will drain a battery to zero V if left for weeks at a time. There has never been any liquid inside of the unit and that specific issue is board related (battery management chip) that Evolv would replace if someone wanted to send the board to them.

Rayon wicking is different for every atty and takes a little trial and error to perfect it for each one.

 

[Rob B.]

I LOVE mine. Made me wonder why I waited so long to get one!

Xeta is built and waiting for an empty boro. Sadly, only have one atm, so vaping away trying to get one. Dotshell clone is ordered. I may have to go back and look in Canada for BB extras since the China stuff is creeping along.

Hey Mel. Sure you have this already, but just in case... Seems like decent pricing.

Medicine Hat Vape Shop - Electronic Cigarettes, Starter Kits, Ejuice

 

[charlie1465]

Rayon is all I use in RTAs and RDAs with deep wells. I don't own the Xeta so can't really give any advise on wicking, RBAs and the BB are a no for me because maintenance is too much of a PiTA.

My BB hardly sees any use these days and it still has the EUC ceramic coil installed from months ago. It's either that one or the eLeaf EC-Mesh that are my go to coils for the BB. They last for months, work great and provide simple maintenance.

I really should sell the BB off cheap and get rid of it so someone else can enjoy it. There is an issue with the DNA 60 in it where it will drain a battery to zero V if left for weeks at a time. There has never been any liquid inside of the unit and that specific issue is board related (battery management chip) that Evolv would replace if someone wanted to send the board to them.

Rayon wicking is different for every atty and takes a little trial and error to perfect it for each one.

Yes I'd forgotten that you only run the euc coils in your BB. Shame that you're not using it. I don't really find the rbas any more or less of a problem compared to an rta especially if you go for the Atmizoo designs or the xeta. I agree that some are a bit fiddly but then so are some rtas.

Hope you're doing ok and coping in this strange time

 

[jfcooley]

Went looking for BB, clone will take forever, nothing in classifieds, too cheap to pay full price

 

[Rob B.]

Went looking for BB, clone will take forever, nothing in classifieds, too cheap to pay full price

I don't know Jay. These seem like pretty good prices.

BILLET BOX ACCESSORIES

 

[Aliraonz]

Since I decided to fix my leaky Tigon tank per @Don29palms advice, my Nautilus has found a new home.

I thought it was a Tigon the one in the video , mine has been behaving pretty well just droplets near the af at times but nothing else

 

[Rob B.]

I thought it was a Tigon the one in the video , mine has been behaving pretty well just droplets near the af at times but nothing else

Yeah, mine leaked all around the top slider cap profusely. Also leaked down through the airflow, and gurgled while drawing on it. Hated sucking the juice up into my mouth. It was definitely more fun to smash it in the video, than it was to use it. I hated that tank. All is good though. I like my Nautilus tank, and it looks pretty sharp on the Tigon battery mod. What do you think?