Letitia

Citrus Junkie
Supporting Member
ECF Veteran
Apr 2, 2017
25,860
136,890
West Frankfort, IL
Problem is I'd already added the nic. Won't calculations get complex when I start diluting with base?
This is my lazy way...first off I mix my nic base about 600ml at a time so I always have base ready to mix on the fly. If I over pour a flavor I pull off 5ml of the mix and add 5ml of base, then drip only paying attention to the one flavor I've messed up. If it's still too strong I add another 5ml of base and so on until I'm happy. Say I only needed 10ml base to fix that one flavor I'll create a 10ml recipe for the flavors I had right and add to the sample (just the flavors, you already have the base and offending flavor adjusted). If that tastes alright in a week or so I'll create a recipe that uses my botched mix as a flavor so all I have to is add the other flavors and base. Or you can add the other flavors to match the sample and dilute as needed using a 2:1 ratio with your nic base. Hope that makes sense.
 

englishmick

Vaping Master
ECF Veteran
Verified Member
Sep 25, 2014
6,589
35,821
Naptown, Indiana
Problem is I'd already added the nic. Won't calculations get complex when I start diluting with base?

Depends how you figure out recipes. I use a simple spreadsheet. It doesn't do as much as the on-line calculators. I just have one line for base rather than lines for PG, VG and nic.

Whatever calculator you use run the recipe for 10mls of what you made originally. Then run it again for 20mls of what you want to end up with. For each line in the recipe subtract the amount in the first run from the amount in the second run. That tells you how much to add to get to the second recipe. If there are any lines where the amount in the first run is more than the amount in the second run then you would have to redo the second run again for 30mls or whatever.

I've done it and it's pretty straightforward. Fixes a lot of screw-ups.
 

charlie1465

ECF Guru
ECF Veteran
Dec 30, 2014
10,789
72,866
Roquebrune sur Argens, Var, France
Problem is I'd already added the nic. Won't calculations get complex when I start diluting with base?
Just use an app called liqcalc. It allows for mixing two different strength bases together. You can get it on Google play :)
 

Resistance

Ultra Member
ECF Veteran
Feb 22, 2020
1,604
9,754
IMG_20200620_043546.jpg

Received this nice yellow Maxpod for review from @freemax yesterday (Friday).
First impressions is it looks promising.
 

charlie1465

ECF Guru
ECF Veteran
Dec 30, 2014
10,789
72,866
Roquebrune sur Argens, Var, France
Good morning shinies :wub:

May everyone's weekend be shiny and bright....oh and warm :D

Oh almost forgot they've decided to allow some of the midsummer music festival stuff to go ahead....happy midsummer weekend everyone :banana::banana::banana:
 
Last edited:

Pigs

Vaping
Supporting Member
ECF Veteran
Jun 7, 2019
7,425
53,314
Sydney Australia
man that actua;;y sounds fun! reminded me of the rain of rainbows i once brought upon myself. even solemn sombre serious sarah letitia lashed me a couple.

ah, the good times_ rreminds me, when s naechste season in your puffbanditchronicle?
I'm afraid to open up that frightening chronical again. Vague whispers of shadowy sightings might force my hand though. Stay tuned.
 

Pigs

Vaping
Supporting Member
ECF Veteran
Jun 7, 2019
7,425
53,314
Sydney Australia
This is my lazy way...first off I mix my nic base about 600ml at a time so I always have base ready to mix on the fly. If I over pour a flavor I pull off 5ml of the mix and add 5ml of base, then drip only paying attention to the one flavor I've messed up. If it's still too strong I add another 5ml of base and so on until I'm hkuappy. Say I only needed 10ml base to fix that one flavor I'll create a 10ml recipe for the flavors I had right and add to the sample (just the flavors, you already have the base and offending flavor adjusted). If that tastes alright in a week or so I'll create a recipe that uses my botched mix as a flavor so all I have to is add the other flavors and base. Or you can add the other flavors to match the sample and dilute as needed using a 2:1 ratio with your nic base. Hope that makes sense.
That's exactly the way I'd do it. Fantastic advice!! Thanks Letitia
 

Pigs

Vaping
Supporting Member
ECF Veteran
Jun 7, 2019
7,425
53,314
Sydney Australia
Depends how you figure out recipes. I use a simple spreadsheet. It doesn't do as much as the on-line calculators. I just have one line for base rather than lines for PG, VG and nic.

Whatever calculator you use run the recipe for 10mls of what you made originally. Then run it again for 20mls of what you want to end up with. For each line in the recipe subtract the amount in the first run from the amount in the second run. That tells you how much to add to get to the second recipe. If there are any lines where the amount in the first run is more than the amount in the second run then you would have to redo the second run again for 30mls or whatever.

I've done it and it's pretty straightforward. Fixes a lot of screw-ups.
Thanks Mick!
 

Rob B.

Ultra Member
ECF Veteran
Jan 24, 2019
2,317
18,119
goodbye
good morning2.gif
Shiny's! Hoping everyone has a fantastic weekend. Hoping all you dad's have a safe, happy, and healthy Father's day. :)

Yesterday, it was announced that it was mandatory to wear masks here. I don't quite understand it. All of Wake County has less than 2,500 confirmed cv19 cases. I wear a mask when I am in a situation that I can't social distance properly, like grocery stores and places with a lot of people, but in the car or out on a walk where I see very few people, I'm not inclined to wear one.

It also looks, at this point like the kids won't be going back to classrooms in the Fall. :( The online stuff just isn't working. Participation is very low. The kids need to be in a supervised, structured environment, and most parents just can't be home making sure their children are participating. The states and local school systems need to come up with alternatives to get the kids engaged in their education. It's our children's future, and as it stands with what's in place now, they are just using this situation as an extended vacation. It's not good.
 
Last edited:

DeloresRose

Vaping Master
ECF Veteran
Apr 25, 2014
8,610
63,106
toledo ohio
Morning all.

Been a rough week. Georgia is taking Rudy being gone pretty hard. I’m trying to distract her with car rides and walks. I gotta get her out early today before it heats up.

I dropped one of my Dots yesterday, hard, almost like I threw it, on the concrete. And it was flashing, not firing. I thought I’d broken it. Turns out one end of the coil was loose. I had the Dotshell in it, so it was easy to fix. Not a scratch on the Dot.
 

DeloresRose

Vaping Master
ECF Veteran
Apr 25, 2014
8,610
63,106
toledo ohio
well to start with my hip is FINALLY starting to feel “normal”. Like what actually is normal nowadays. I still wake up in pain if I’m sleeping on my right side. That darn screw is pushed out even further than before. The other two are perfect. Not much to do about it except try not to roll on my right side which of course is my dominant side I sleep on. The only other solution is to take the darn thing out which sounds easy enough but is actually quite complicated and could lead to a higher chance of breaking that hip again.

so during this isolation time I’ve
packed on a few pounds here n there hoping that a bit more - shall we say- padding might make it hurt less. The jury is still out on that one though lol!

My poor sister has had every miserable annoyance with her fractured elbow. It appears that she was HIGHLY allergic to whatever skin cleanser used to wash the surgical site - probably betadine or similar.

so she broke out in a rash with hives EVERYWHERE it touched including under her arm and the side of her torso. She ended up with cellulitis everywhere which became systemic. They had to remove all of the dressing and bandages and even the stitches replaced by steristrips. Couldn’t be put on oral steroids only topical cream because of some reason due to the surgery. Sooo she had to be put on large doses of antibiotics and is covered in think ointment!!!

And yet the woman still is upbeat and joking about life. What else is there to do? I’d be bellyaching to anyone I could get to listen.

She’s had very little help as well from her mentally challenged daughter and her “bf” who’s dealing w Parkinson’s both physically and mentally.

aren’t you glad you asked lol!! She says she’s coming to visit soon cuz she actually can relax here but she’ll probably be starting pt at week 4 post surgery. So who knows. Plus I’ve been so isolated and I’m nervous about having people out of my tiny bubble come visit. She lives in New Jersey and her “bf” now lives with his son who’s a cop so god only knows who he comes into contact with.

I dunno maybe I’m just being paranoid or overreacting?? Would love to hear your thoughts or anyone else’s thoughts on it.

my roommate is moving out in 2 weeks with her bf so somehow during a global pandemic I’ll need to search for a brew roommate. I’ll try to go as long as I can though before actually looking.

what a mess 2020 is.

But enough of me - how are you doing /feeling? Any new crazy shiny purchases I can drool over???? Or are behaving yourself???? If you got anything new in the past month or two I need to know lol!!! And I need pics! Have you figured out how much to do that yet?? I’ll send you an older iPhone if you want one even if it’s just to use the camera for your Shinys!!!

I hope your well. Missed chatting with you and others :rolleyes: !!


I’m so glad you’re finally having improvement in that hip! My husband broke me his leg in several places, had a plate and nine screws. He was told so many things about that, that they would have to come out, they’d have to stay in, take them out within 18 months or it couldn’t be done... he ended up leaving them in for over ten years.
 

chanelvaps

ECF Guru
ECF Veteran
Verified Member
Oct 3, 2013
16,031
85,308
Burbank CAlifornia
No


not sure which Zeus your looking for but I’ve bought a lot I mean A LOT of backup bubble glass from this place. Let me know if they have what your looking for. I may know another Omer or two places but I’ll have to take some time to find them.

I hope this has what you need. I’ve bought backup glass from here for all my favorite RTAs.

GeekVape Zeus 25mm Single Coil RTA Bubble Expansion Glass Tube Replacement (3PCS) [FT040x3]$7.99
HI Sara, I found them at Eightvape. Thanks
 

chanelvaps

ECF Guru
ECF Veteran
Verified Member
Oct 3, 2013
16,031
85,308
Burbank CAlifornia
Morning all.

Been a rough week. Georgia is taking Rudy being gone pretty hard. I’m trying to distract her with car rides and walks. I gotta get her out early today before it heats up.

I dropped one of my Dots yesterday, hard, almost like I threw it, on the concrete. And it was flashing, not firing. I thought I’d broken it. Turns out one end of the coil was loose. I had the Dotshell in it, so it was easy to fix. Not a scratch on the Dot.
Love to sweet Georgia :wub:
 

Pigs

Vaping
Supporting Member
ECF Veteran
Jun 7, 2019
7,425
53,314
Sydney Australia
Bad news on the Australian Vape front.
@FLICK brought this to my attention today:

Prohibition on importing e-cigarettes containing vaporiser nicotine

It was just announced that a nicotine ban will be introduced at a federal level here from 1 July 2020. We'll need prescriptions to buy any vape products with nicotine in them and then only through authorized pharmacies. Imagine the cost and hassle. I doubt many doctors would hand out scripts and I doubt that even if they do there would be many authorized vendors (pharmacies) who would carry nic. Even if they did no doubt the mark up would be massive.

Customs will stop anything they find at the border from July 1.
I don't know if it will include hardware too because of the labels that say WARNING This product contains nicotine. Nicotine is an addictive chemical.

I hope @Possum64 is aware. Pretty sure @Daniel Forsyth will be ok

There'll be plenty of vapers out there who will be back to smoking cigarettes within a fortnight
 

Users who are viewing this thread